Search PubMed⌕ Search

Biomedical subjects

C Aparicio

Publications and source records attributed to C Aparicio.

At least 19 recordsLinked to original sources

[Use of oral anticholinergic therapy in children under 1 years of age with high risk bladder].

THE AIM: To assess the effectiveness and safety of the treatment with oral anticholinergic agents (Oxybutin clorure) in patients under 1 year old, and who aree carriers of high risk bladder secondary to neurological illness as well as no neurological one. MATERIAL AND METHODS: Since 1989, we have indicated treatment with anticholinergic agents to 16 patients: 9 patients had neurogenic bladder secondary to: myelomeningocele (n=7) and sacrocoxigeal teratoma (n=2). Others 7 patients had non neurogenic bladder secondary to: posterior urethral valvulas (n=1), valvula-like syndrome (n=4), post-surgery of neonatal giant bladder diverticulum (n=1) and Prune-Belly syndrome (n=1). The urodinamic study was performed during the first six months of life, being "high risk bladder" defined according to the parameters of compliance vesical and pressure of leak at point (PER). Five of the patients showed neonatal cronic renal failure (CRF), who were treated by cutaneus temporary derivation. All patients at treatment with anticholinergic agents at a 0.2 mg/kg/day dose was established; other early adjunctive treatment prior to the closure of the urinary derivation in children with CRF(n=5); or as a part of the conservative treatment (n=3), alone or associate to intermittent bladder catheterization (IBC) (n=8). During the treatment with anticholinergic agents, the cardiac frequency was controlled by EKG registration in 6 patients, being the rest of the children clinicaly controled (skin colour, mouth dryness, cardiac frequency and intestinal function). RESULTS: In all the cases, the minimum duration of the treatment was one year, until the functional stabilization of the urinary tract. It is to underline the absence of secondary complications which would have caused the suspension or the reduction of the treatment at long term. Conventional studies of urologicals image and urodinamic studies, showed the stabilization of the urinary tract and also the preservation of kidney function and not only was demonstrated in those patients with oral anticholinergic agent as their unique treatment, but also in those patients who had previously been derivated. The previous vesical stabilization allowed the optimum result of subsequent corrective surgeries in five patients (ureteroneocystostomy and vesiscotomy clousure. In cases with previous derivation, the treatment with oral anticholinergic agents made easier vesicostomic clousure in the forth quarter of the first year old wih the maintenance of the vesical stability. CONCLUSIONS: The use of oral anticholinergic agents at a dose of 0.2 mg/kg/day, has resulted to be safe as well as effective in the treatment of high risk bladder in infancy those with less than one year of life. In those patients with serious dysplasia by reflux, it contributes to the preservation of kidney function, it makes easier the early desderivation and it also stabilizes in a functional way the bladder as a previous step to subsequent reconstructive surgeries.

Child↗

Food allergy to wheat: identification of immunogloglin E and immunoglobulin G-binding proteins with sequential extracts and purified proteins from wheat flour.

BACKGROUND: Cereal-associated allergy is particularly considered a serious problem, because cereals are essential in our daily diet. Wheat proteins are classified into albumins, globulins and prolamins (insoluble gliadins and glutenins). OBJECTIVES: Our objectives were to study the involvement in food allergy to wheat of these different protein types by using purified fractions and to identify those binding IgE and IgG antibodies. METHODS: Sera were obtained from 28 patients with food allergy to wheat. Albumins/globulins, gliadins and glutenins were obtained by sequential extraction based on differential solubility; alpha-, beta-, gamma- and omega-gliadins and low molecular weight (LMW) and high molecular weight (HMW) glutenin subunits were purified by chromatography. IgE binding to these extracts and fractions were analysed by radioallergosorbent test (RAST), and immunoblotting; IgG binding was detected by enzyme-linked immunosorbent assay (ELISA). RESULTS: In RAST, 60% of sera were shown to have specific IgE antibodies against alpha-, beta-gliadins and LMW glutenin subunits, 55% to gamma-gliadins, 48% to omega-gliadins and 26% to HMW glutenins. Immunoblotting analysis confirmed results obtained in RAST concerning LMW and HMW glutenin subunits and showed that 67% of patients have IgE antibodies to the albumin/globulin fraction. CONCLUSION: Results obtained in the different tests showed common features and in agreement with other studies indicated the presence of numerous allergens in food allergy to wheat; alpha-, beta-, gamma- and omega-gliadins, LMW glutenin subunits and some water/salt-soluble proteins appeared as major IgE binding allergens, whereas HMW glutenins were only minor allergens. The same type of antigenic profile against gliadins and glutenins was observed with IgG antibodies. Important sequence or structural homologies between the various gliadins and LMW glutenin subunits could certainly explain similarity of IgE binding to these proteins.

Adult↗

Hydroxyapatite ceramic bodies with tailored mechanical properties for different applications.

A perfect control on the final ceramic features will enable the research/clinical community to spread the use of calcium phosphate ceramic bodies to a large number of applications and/or requirements. The mechanical properties of hydroxyapatite ceramic bodies manufactured by different techniques and with different porosities is presented. The flexural strength, hardness, fracture toughness, surface roughness, and their evolution after immersion in SBF are studied. An increase of the mechanical properties with density is observed. The factors governing these results are analyzed. The increase of the porosity percentage of the bodies results in an increase on the surface roughness. The degradation studies show that the HA ceramics keep their integrity and mechanical properties under physiological conditions during the soaking time studied. The OHAp ceramic bodies with controlled porosity could be appropriated for hard tissue substitution or as a carriers for controlled delivery of drugs or as scaffolds for tissue engineering.

Algorithms↗

Mechanical performance of acrylic bone cements containing different radiopacifying agents.

The effect that three different radiopacifying agents, two of them inorganic (BaSO4, ZrO2) and one organic (an iodine containing monomer, IHQM) have on the static and dynamic mechanical properties of acrylic bone cements was studied. Compressive and tensile strength, fracture toughness and fatigue crack propagation were evaluated. The effect of the inorganic fillers depends on their size and morphology. In relation to the radiolucent cement, the addition of zirconium dioxide improved significantly the tensile strength, the fracture toughness and the fatigue crack propagation resistance. In contrast, the addition of barium sulphate produced a decrease of the tensile strength, but did not affect the fracture toughness and improved the crack propagation resistance. When the iodine containing monomer was used, although the tensile strength and the fracture toughness increased, the fatigue crack propagation resistance remained as low as it was for the radiolucent cement.

Barium Sulfate↗

Human-osteoblast proliferation and differentiation on grit-blasted and bioactive titanium for dental applications.

Physico-chemical and topographical surface quality of commercially pure titanium (c.p. Ti) dental implants is one of the most influencing factors in the improvement of their osseointegration. In this sense, previously, a two-step method (2S) for obtaining bioactive blasted-rough titanium surfaces was developed for improving short-term (due to its bioactivity) and long-term (due to its roughness) osseointegration. This 2S-method consists of: (1) Grit blasting on titanium surface in order to roughen it, and (2) thermo-chemical (TCh) treatment in order to obtain a bioactive surface with bone-bonding ability. The aim of the present work is to evaluate the in vitro human-osteoblast response (proliferation, differentiation - ALP activity- and cell morphology-studied by environmental scanning electron microscopy) of rough c.p. Ti (grit blasted), bioactive c.p. Ti (thermo-chemically treated) and rough-bioactive c.p. Ti (2S-treated). Different grit materials (Al(2)O(3) and SiC) have been used in order to investigate their influence. The results showed that cell adhesion was statistically higher for the rough and bioactive surfaces, whatever the grit used. Cells proliferated very well on all the c.p. Ti surfaces. If comparing groups with and without TCh (all other treatments being equal) the ALP was always higher in the groups with TCh, indicating stimulation of osteoblast differentiation because of TCh, more significantly in the groups that were first blasted. Those ALP results were accompanied by a decrease in the value of proliferation, which shows the good behavior of the cells. This results suggest that a rough and bioactive-titanium surface obtained by 2S-treatment enhances adhesion and differentiation activity of human osteoblasts cells.

Journal Article↗

Growth of bioactive surfaces on dental implants.

Some metallic materials, such as pure titanium, Ti-6Al-4V, are used for dental and orthopedic implants under load-bearing conditions. However, they do not form a chemical bond with bone, which would achieve a good implant-bone fixation in service. In recent works, it has been demonstrated that an in vitro, chemically deposited, bone-like apatite layer with bone-bonding ability could be induced on a titanium surface. By reproducing that chemical procedure, in this work, a dense bone-like apatite layer was formed on the surface of the titanium in simulated body fluid. In addition, the different steps and kinetics of the layer-formation have been studied, because the observation of the samples in the wet state by means of the environmental scanning electron microscope has allowed the observation in situ of the apatite deposition process over a number of days. One of the most important features of the present study is that it can be carried out on a single titanium sample and the process is not interrupted at any stage. One of the main drawbacks of this chemical method is that the samples covered with apatite are susceptible to contamination by bacteria. The behavior of different types of antibiotics used to avoid this contamination has also been studied using the environmental scanning electron microscope. Finally, osteoblast cells have been cultured on the apatite-coated titanium samples to assess their biocompatibility.

Alloys↗

[Allergenicity of wheat flour].

Food allergy to wheat flour is a pathology that is found less frequently than coeliac disease or respiratory allergy to flour; it seems however to be a constant argument. Our study used a panel of 28 patients diagnosed with food allergy to wheat flour. Our objective was to characterise the reactivity of type IgE and IgG antibodies of these patients with regard to the different classes of proteins of wheat flour so as to establish an antigenic profile of the allergens of wheat in the framework of food allergy to flour. Our results show the implication of different classes of wheat proteins and notably the major reserve proteins (gliadins and glutens) in food allergy.

Allergens↗

Deficiency or inhibition of Gas6 causes platelet dysfunction and protects mice against thrombosis.

The growth arrest-specific gene 6 product (Gas6) is a secreted protein related to the anticoagulant protein S but its role in hemostasis is unknown. Here we show that inactivation of the Gas6 gene prevented venous and arterial thrombosis in mice, and protected against fatal collagen/epinephrine-induced thrombo embolism. Gas6-/- mice did not, however, suffer spontaneous bleeding and had normal bleeding after tail clipping. In addition, we found that Gas6 antibodies inhibited platelet aggregation in vitro and protected mice against fatal thrombo embolism without causing bleeding in vivo. Gas6 amplified platelet aggregation and secretion in response to known agonists. Platelet dysfunction in Gas6-/- mice resembled that of patients with platelet signaling transduction defects. Thus, Gas6 is a platelet-response amplifier that plays a significant role in thrombosis. These findings warrant further evaluation of the possible therapeutic use of Gas6 inhibition for prevention of thrombosis.

Animals↗

Tilted implants as an alternative to maxillary sinus grafting: a clinical, radiologic, and periotest study.

BACKGROUND: Owing to mechanical and anatomic difficulties, implant treatment in the atrophic maxilla represents a challenge. The maxillary sinus floor augmentation procedure is still not universally accepted because of its complexity and its unpredictability. PURPOSE: In this study, a combination of tilted and axial implants was used in patients with severely resorbed posterior maxillae as an alternative to sinus grafting. MATERIALS AND METHODS: Twenty-five patients were rehabilitated with 29 fixed partial prostheses supported by 101 Brånemark System implants. Fifty-nine implants were installed in an axial and 42 in a tilted direction. The average follow-up period was 37 months (range: 21-87 mo post loading). RESULTS: After 5 years, the implant cumulative success rate was 95.2% (survival: rate 100%) for the tilted implants and 91.3% (survival rate: 96.5%) for the axial implants, and the prosthesis survival rate was 100%. At the fifth year, the average marginal bone loss was 1.21 mm for the tilted implants and 0.92 mm for the axial ones. The mean Periotest values (PTV) at loading time were -2.62 and -3.57, and after 5 years the PTVs were -4.73 and -5.00 for the tilted and the axial implants, respectively. During the follow-up, all prostheses but two were mechanically stable, retightening of 18 abutment screws and of 5 gold screws in 14 prostheses was done, and fracture of two abutment screws and two occlusal surfaces was experienced. CONCLUSIONS: Results indicate that the use of tilted implants is an effective and safe alternative to maxillary sinus floor augmentation procedures.

Alveolar Ridge Augmentation↗

Alveolar ridge widening by distraction osteogenesis: a case report.

Alveolar width deficiencies have generally been corrected by guided tissue regeneration or bone augmentation with and without membranes. The use of distraction osteogenesis is proposed for the correction of horizontal alveolar width defects. In this case report, horizontal bone generation by distraction osteogenesis was achieved prior to implant placement. Following implant restoration, favorable bone response was observed after two years of function. Distraction osteogenesis to widen the alveolus may prove to be a clinically useful treatment option in selected cases.

Alveolar Ridge Augmentation↗

[Allergy to cypress pollen: preparation of a reference and standardization extract in vivo].

Development of Cypress allergy frequency led to the standardization of commercial cypress extract used for diagnosis and immunotherapy. Previous in vitro studies on two cypress pollen species (Cupressus sempervirens and Cupressus arizonica) allowed us to produce an allergenic solution composed by a mixture of both extracts for in vivo standardization. Dilutions of this allergenic solution were tested by prick-test on 44 patients with clinical allergy to cypress pollen to define the dilution that corresponds to a 6 mm wheal conformed to the definition of 100 IR. The mixture of the two major species found in France is justified by the in vitro study results. Extracts revealed complementary allergenic composition: Cup sempervirens showed a wider diversity of allergens whereas Cup arizonica showed a higher content of the major 43 kDa allergen. Thus, according to in vivo analysis, we are able to produce a standardized extract of Cypress pollen expressed in IR.

Adult↗

Improvement of the mechanical properties of acrylic bone cements by substitution of the radio-opaque agent.

Acrylic bone cements become radio-opaque by the addition of an inorganic compound, commonly BaSO4 or ZrO2. However, the use of these additives has some negative effects such as loss of mechanical properties, risk of release and bone resorption. The use of the monomer 2,5-diiodo-8-quinolyl methacrylate (IHQM), which shows adequate polymerization and radio-opacity properties, is proposed as a new X-ray opaque, methacrylate iodine-containing agent. The aim of this study is to determine the effect of this new radio-opaque agent on the mechanical properties of acrylic bone cements. The addition of the iodine-containing methacrylate provides a statistically significant increase in the tensile strength, fracture toughness and ductility, with respect to the barium sulphate-containing cement. This effect can be attributed to the fact that the use of a radio-opaque monomer eliminates the porosity associated with the barium sulfate particles, which show no adhesion to the matrix. However, some reinforcing effect must also be attributed to the iodine-containing monomer, since the tensile and fracture toughness values reached are even higher than those shown by the radiolucent cement.

Journal Article↗

Use of 5-mm-diameter implants: Periotest values related to a clinical and radiographic evaluation.

A modified design of the original Brånemark implant consisting of a cp. Titanium 5.0-mm-diameter self-tapping implant threaded up to the marginal platform has been proposed for specific indications. From February 1992 to November 1995, a total of 185 machined screw implants (Nobel Biocare, Gothenburg, Sweden) were installed in 45 patients to withstand 58 prostheses. Of these, 91 were 3.75-mm diameter and 94 were 5.0-mm wide. Most of the implants were placed in type B and C bone quantity and type 2 and 3 bone quality. A retrospective evaluation with regard to indications, marginal bone remodelling, Periotest values (PTv) and survival rate is presented. PTv and radiographic measurements were made at abutment connection and repeated 3, 6 and 12 months later and thereafter every year. The follow-up ranged from 16 to 55 months (mean 32.9 months) post-loading. Three patients with 8 5.0-mm implants dropped-out of the study at different stages. Out of the wide implants, 1 was expelled during the healing period; 3 were found mobile at the abutment connection; 1 lost its osseointegration suddenly after 2 years of function; 4 belonging to 1 patient did not meet the success criteria due to continuous marginal bone loss. The cumulative success rate of 5.0-mm implants (CSR) after 1 year of function was 97.2% for upper jaws and 88.4% in mandibles, whereas the CSR in maxilla after 48 months was 97.2% and 83.4% in mandibles. The obtained PTv from 5.0-mm-wide fixtures in maxilla and mandibles were respectively 1.1 and 0.6 units lower than those obtained PTv for 3.75-mm-diameter implants in the same patients. The hypothesis that there are differences in the damping capacity of the bone surrounding a 5.0-mm-wide implant compared to the 3.75-mm-diameter implant is supported by the PTv results.

Adult↗

The use of the Periotest value as the initial success criteria of an implant: 8-year report.

Osseointegration is a histometric process that occurs gradually over a period of time. The load that an implant is able to bear depends upon, among other parameters, the quality of the bone-implant contact. For 8 years the damping capacity of 1,182 Brånemark implants inserted consecutively in 315 patients was measured using the Periotest method. The following clinical observations were made: (1) a relationship was found between implants with a specific Periotest value range that, at the moment of the transepithelial connection, were considered to be clinically stable, asymptomatic, and whose radiograph image was not radiolucent; (2) a relationship was found between clinically nonintegrated implants with a different Periotest value range; (3) variations in the Periotest value were related to the type of bone in which the implant was placed; (4) a small percentage of borderline implants with a Periotest value between the osseointegrated and the nonosseointegrated Periotest values was detected; (5) the percentage of secondary failures was related to an initial Periotest value corresponding to a borderline implant; (6) the healing time of each implant was individualized in accordance with the successively obtained Periotest value; (7) the load and the design of the prosthesis were individualized; (8) early detection of failing implants before fabrication of prostheses is possible; (9) communication was improved between the surgeon and the prosthodontist; and (10) variations in Periotest value were related to bone remodeling. The sensitivity of the principal clinical test in evaluating osseointegration is discussed regarding the moment of its application. The use of Periotest values as an initial success criteria of an implant is proposed.

Dental Abutments↗

Molecular mechanisms of activated protein C resistance. Properties of factor V isolated from an individual with homozygosity for the Arg506 to Gln mutation in the factor V gene.

Resistance to activated protein C (APC), which is the most prevalent pathogenetic risk factor of thrombosis, is linked to a single point-mutation in the factor V (FV) gene, which predicts replacement of Arg (R) at position 506 with a Gln (Q). This mutation modifies one of three APC-cleavage sites in the heavy chain of activated FV (FVa), suggesting that mutated FVa (FVa:Q506) is at least partially resistant to APC-mediated degradation. To elucidate the molecular mechanisms of APC-resistance and to investigate the functional properties of FV in APC resistance, FV:Q506 was purified from an individual with homozygosity for the Arg to Gln mutation. Intact and activated FV:Q506 were demonstrated to convey APC resistance to FV-deficient plasma. Thrombin- or factor Xa-activated FV:Q506 were found to be approx. 10-fold less sensitive to APC-mediated degradation than normal FVa, at both high and low phospholipid concentrations. The degradation pattern observed on Western blotting suggested that FVa:Q506 was not cleaved at position 506. However, it was slowly cleaved at Arg306, which explains the partial APC sensitivity of FVa:Q506. FV is initially activated during clotting and then rapidly inactivated in a process which depends on the integrity of the protein C anticoagulant system. During clotting of APC-resistant plasma, FV:Q506 was activated in a normal fashion, but then only partially inactivated. In conclusion, the reduced sensitivity of FVa:Q506 to APC-mediated degradation is the molecular basis for the life-long hypercoagulable state which constitutes a risk factor for thrombosis in APC-resistant individuals.

Arginine↗

A new method to routinely achieve passive fit of ceramometal prostheses over Brånemark osseointegrated implants: a two-year report.

To maintain osseointegration, it is essential that the prosthesis fit with total passivity because the absence of a periodontal ligament makes the implant unable to adapt its position to a nonpassive framework. The traditional system of building a metal framework by melting over mechanized pieces--called gold cylinders in the Brånemark system--has been modified so these pieces are joined to the metal framework by means of physicochemical bonding. This bond is achieved by treating the metallic surfaces with a Silicoater system and a composite resin cement that sets in the mouth using an improved cementing protocol. In this paper, the clinical viability of this new philosophy, shown over 2 years, is presented. A total of 64 prostheses (39 maxillary and 25 mandibular) supported by 214 abutments, with an average observation period of 9 months, were evaluated. The results show that it is possible to routinely obtain a ceramometal prosthesis with a totally passive circular fitting while maintaining the possibility of retrieval, thus making postceramic soldering unnecessary.

Cementation↗