Search PubMed⌕ Search

Biomedical subjects

C Altona

Publications and source records attributed to C Altona.

At least 19 recordsLinked to original sources
PubMed1999

Thermodynamic properties of an intramolecular DNA four-way junction.

We have investigated the thermodynamic properties of two homologous DNA four-way junctions, J4 and J4M, based on 46-mer linear DNA molecules. J4 and J4M have the same base sequence with the only difference that the latter contains an uncharged methylene-acetal linkage, -O3'-CH2-O5', instead of the phosphodiester linkage, -O3'-PO2-O5'-, between the residues T18 and C19. The comparison of the thermal unfolding of the J4 junction and J4M junction serves to investigate the effect of the uncharged methylene-acetal linkage on the stability of the junction. Our analysis is based on CD, UV absorbance spectroscopy, DSC, and chemical footprinting. The aim is to characterize in detail the structure and stability of the junctions. As demonstrated before by NMR, in the presence of 5 mM MgCl2 +/- 50 mM NaCl, both J4 and J4M form a complete four-way junction. This is now evidenced by protection from OsO4 cleavage (chemical footprinting). We can assume that full base pairing occurs throughout the arms even at the center of the junction. CD spectra suggest that the helices within the junctions adopt the regular B-DNA conformation. Almost identical melting temperatures and unfolding enthalpies are obtained for J4 and J4M both by UV and DSC. Furthermore, the Van't Hoff enthalpy (DeltaHVH) derived from UV melting equals the calorimetric enthalpy (DeltaHcal), which means that the melting process of the structures proceeds in a two-state manner. All results taken together support the conclusion that there are no major conformational and energetic differences between J4 and J4M. The inclusion of the uncharged methylene-acetal group into the junction has no effect on its stability.

Base Pairing↗
PubMed1997

NMR study of the exchange rate between two stacked conformers of a model Holliday junction.

Our investigations into the folding behavior of a series of small model Holliday junctions in the presence of magnesium ions revealed a sequence (junction J9a) displaying a 71/29 population ratio between the two differently folded stacked X-conformers in slow exchange on the NMR chemical shift time scale. For the first time we report the rates of interconversion between two stacked X-conformers and their lifetimes as measured by chemical exchange (EXSY) NMR spectroscopy: k1 5.6 (+/-0.5) s-1, k-1 2.3 (+/-0.2) s-1. The corresponding lifetimes (tau=1/k) are: tau1 430 ms, tau2 180 ms and the conformational transition barrier amounts to DeltaGdouble dagger294 68 kJ/mol (16.2 kcal/mol). It is argued that this free-energy barrier reflects the maximum barrier that separates stacked X-conformers in junction 9a from the unfolded structure.

DNA↗
PubMed1997

Design and NMR study of an immobile DNA four-way junction containing 38 nucleotides.

The DNA Holliday junction is a central intermediate in genetic recombination. We have designed and synthesized a DNA oligomer, J1a, as a model compound for the Holliday junction suitable to be studied by NMR spectroscopy and future molecular modelling. The design was based on a 46-base oligomer, J4, previously studied by Pikkemaat, J. A., van den Elst, H., van Boom, J. H. & Altona, C. [Biochemistry 33, 14896-14907 (1994)], including the propensity to undergo a self-folding process to give a four-way junction in which three of the four arms are capped with a hairpin loop. J1a, however, is considerably shortened by eight bases and thus contains only 38 residues which significantly facilitates the proton resonance assignments. The base sequence at the branch point is identical to that in J4. 1H-NMR data clearly point to the presence of three hairpin loops in J1a and show that the double-helical arms adopt the B-DNA form. Quasicontinuous pairwise stacking between helical arms to give a single preferred stacked X-conformation is evident. The extent of folding into this stacked conformation is strongly dependent upon the magnesium concentration. Full Watson-Crick base pairing at the branch point is completely preserved. The A/D-stacking preference of the small junction is the same as that exhibited by J4.

Base Sequence↗
PubMed1997

Application of a genetic algorithm in the conformational analysis of methylene-acetal-linked thymine dimers in DNA: comparison with distance geometry calculations.

The three-dimensional spatial structure of a methylene-acetal-linked thymine dimer present in a 10 basepair (bp) sense-antisense DNA duplex was studied with a genetic algorithm designed to interpret NOE distance restraints. Trial solutions were represented by torsion angles. This means that bond angles for the dimer trial structures are kept fixed during the genetic algorithm optimization. Bond angle values were extracted from a 10 bp sense-antisense duplex model that was subjected to energy minimization by means of a modified AMBER force field. A set of 63 proton-proton distance restraints defining the methylene-acetal-linked thymine dimer was available. The genetic algorithm minimizes the difference between distances in the trial structures and distance restraints. A large conformational search space could be covered in the genetic algorithm optimization by allowing a wide range of torsion angles. The genetic algorithm optimization in all cases led to one family of structures. This family of the methylene-acetal-linked thymine dimer in the duplex differs from the family that was suggested from distance geometry calculations. It is demonstrated that the bond angle geometry around the methylene-acetal linkage plays an important role in the optimization.

Algorithms↗
PubMed1996

Classification of nucleic acid junctions.

Branched nucleic acid species, three-way and four-way junctions in particular, constitute important structural elements in RNA and DNA, either as part of the architecture (mainly RNA) or as potential intermediates in biological processes (mainly DNA). The number of research reports on branched nucleic acids is growing rapidly. Thus far, comparison of tertiary structures reported by various groups remains difficult as it is hampered through lack of uniform depiction and notation. We therefore propose a set of simple rules that allow a unique classification as well as a uniform depiction of virtually any junction in terms of the base-pairs at the branch point. In its simplest form the methodology describes and arranges the n base-pairs in an n-way (nH) junction but it is easily extended in order to include single-stranded regions, mismatches and penultimate base-pairs. Counting only base-pairs at the branch point, 64 different bulged 3HS2 three-way junctions can be constructed, arranged into eight different classes. For reasons of symmetry, only 36 different immobilized 4H junctions are possible, arranged into six classes, and only 24 tight 3H junctions, in four classes. The number of different junctions in the general nHSm case is 4n, multiplied by 4m when the Sm unpaired bases are included in the calculation.

Base Composition↗
PubMed1996

Conformational aspects of an uncharged phosphate analogon built in at the branch-point of a DNA four-way junction.

Electrostatic interactions appear to be important in the conformation and dynamics of DNA four-way junctions. Particularly, the Coulomb repulsion between two approaching phosphate groups at the site of strand exchange is commonly supposed to have a negative influence on the thermodynamic stability of the fully stacked conformation. We synthesized a unimolecular DNA four-way junction containing an uncharged methylene-acetal linkage, -O3'-CH2-O5'-, instead of a regular phosphodiester linkage, -O3'-PO2-O5'-, between two specific residues at the branch-point to examine the effect of charge removal. Complete sequential 1H-NMR assignments of the non-exchangeable base protons and H1'/H2'/H2" sugar protons were obtained with the aid of NOESY and TOCSY experiments. On the basis of the NMR data it is concluded that the stacking arrangement at the branch-point of the modified oligonucleotide is similar to that of the previously studied parent four-way junction. Surprisingly, this is not the stacking arrangement in which the close phosphate-phosphate contact at the site of strand exchange would be absent. Some implications of this novel information regarding the role of the phosphate-phosphate repulsion in four-way junctions are discussed.

DNA↗
PubMed1996

NMR studies of DNA three-way junctions containing two unpaired thymidine bases: the influence of the sequence at the junction on the stability of the stacking conformers.

DNA three-way junctions (TWJs) containing unpaired residues at the branch point can adopt a conformation in which one helix is stacked upon another, forming a coaxial, quasicontinuous double helix. As in four-way junctions (FWJs), two conformers with different stacking arrangements between the arms are possible. However, in both types of structures a markedly strong preference for one conformer has been observed. To investigate the basis for this preference, in particular the influence of the stacking proclivity of the base-pairs at the centre of the junction, two linear oligomers (36 nucleotides), TWJ1 and TWJ2, differing only in one base-pair (G.C versus C.G, respectively) at the branch point, were designed and chemically synthesized. Each one is expected to fold into a stable three-way junction, containing two unpaired thymidine bases at the junction region and two arms capped with a hairpin loop. The data obtained from 1H and 31P-NMR spectroscopy confirm that both oligomers are present as stable three-way junctions. In both TWJs two of the helical arms stack preferentially upon each other. However, the stacking arrangement is similar in both molecules. From this it is deduced that purine-purine stacking across the junction cannot be considered as a major factor that determines the preferred stacking arrangement.

Base Composition↗
PubMed1996

Three-way and four-way junctions in DNA: a conformational viewpoint.

DNA junctions are potential intermediates in various important genetic processes, including mutagenesis and recombination. The quantity of research carried out in this area is rapidly increasing. Examples of three-way and four-way junctions are now relatively well characterized and a few common properties have been recognized, of which the most important is the tendency of junctions to fold into one or more coaxially stacked helical conformations or cross-over structures.

Base Sequence↗
PubMed1995

Slow conformational exchange in DNA minihairpin loops: a conformational study of the circular dumbbell d .

In recent years various examples of highly stable two-residue hairpin loops (miniloops) in DNA have been encountered. As the detailed structure and stability of miniloops appear to be determined not only by the nature and sequence of the two bases in the loop, but also by the closing base pair, it is desirable to carry out in-depth studies of especially designed small model DNA compounds. Therefore, a circular DNA dumbbell-like molecule is tailored to consist of a stem of three Watson-Crick base pairs, flanked on each side by a minihairpin loop. The resulting circular DNA decamer 5'-d -3' (I) is studied in solution by means of nmr spectroscopy. At a temperature of 269 K the molecule occurs in a 50/50 mixture of two dumbbell structures (denoted L2L2 and L2L4). L2L2 contains three Watson-Crick C-G base pairs and two two-residue loops (H2-family type) in opposite parts of the molecule. On raising the temperature from 269 to 314 K, the L2L4 conformer becomes increasingly dominant (95% at 314 K). This conformer has a partially disrupted closing G-C base pair in the 5'-GTTC-3' loop with only one remaining solvent-accessible hydrogen bond between NH alpha of the cytosine C(1) and O6 of the guanine G(8), whereas the opposite 5'-CTTG-3' loop remains stable. The disruption of the C(1)-G(8) base pair in the L2L4 form is correlated with the presence of a syn orientation for the C(1) base at the 5'-3' loop-stem junction in the 5'-GTTC-3' loop. The two conformers, L2L2 and L2L4, occur in slow equilibrium (2-20 s-1). Moderate line broadening of specific 1H, 13C, and 31P resonances of residues C(1), G(8), T(9), and T(10) at low temperatures, due to chemical exchange between L2L2 and L2L4, show that the interconversion from an anti to syn conformer in residue C(1) has a small local effect on the structure of the dumbbell. T1 relaxation measurements, chemical-shift considerations, and complete band-shape calculations of the exchange process of the G(8) imino proton reveal a possibility for the existence of multiconformational states in the anti-syn equilibrium.

Base Sequence↗
PubMed1995

Thermodynamics of melting of the circular dumbbell d .

The conformational behavior of DNA minihairpin loops is sensitive to the directionality of the base pair that closes the loop. Especially tailored circular dumbbells, consisting of a stem of three Watson-Crick base pairs capped on each side with a minihairpin loop, serve as excellent model compounds by means of which deeper insight is gained into the relative stability and melting properties of hairpin loops that differ only in directionality of the closing pair: C-G vs G-C. For this reason the thermodynamic properties of the circular DNA decamers 5'-d -3' (I) and reference compounds 5'-d -3' (II) and 5'-d(GCG-TC-CGC)-3' (III) are studied by means of nmr spectroscopy. Molecules I and II adopt dumbbell structures closed on both sides by a two-membered hairpin loop. At low temperature I consists of a mixture of two slowly exchanging forms, denoted L2L2 and L2L4. The low-temperature L2L2 form is the fully intact minihairpin structure with three Watson-Crick C-G base pairs. The high-temperature form, L2L4, contains a partially disrupted closing G-C base pair in the 5'-GTTC-3' loop, with the cytosine base placed in a syn orientation. The opposite 5'-CTTG-3' loop remains stable. A study of the noncircular hairpin structure III shows similar conformational behavior for the 5'-GTTC-3' loop as found in I; a syn orientation for C(6) and two slowly exchanging imino proton signals for G(3). The melting point Tm of II was estimated to lie above 365 K. The Tm value of the duplex stem and the 5'-CTTG-3' loop of the L2L4 form of I is 352 +/- 2 K. The delta H0 is calculated as -89 +/- 10 kJ/mol. The Tm value determined for the individual residues of the 5'-GTTC-3' loop lies 4 degrees-11 degrees lower. The enthalpy delta H0 of melting the thymine residues in the 5'-GTTC-3' loop is calculated to be -61 +/- 7 kJ/mol. Thermodynamic data of the equilibrium between the slowly exchanging two- and four-membered loop conformers of I reveal an upper limit for delta H0 of +30 kJ/mol in going from a two-membered to a four-membered loop, in agreement with the enthalpy difference of +28 kJ/mol between the two loops at the Tm midpoint. For hairpin III the upper limit for delta H0 in going from a two-membered to a four-membered loop amounts to +/- 21 kJ/mol.(ABSTRACT TRUNCATED AT 400 WORDS)

Base Sequence↗
PubMed1995

Conformation of the circular dumbbell d : structure determination and molecular dynamics.

The circular DNA decamer 5'-d -3' was studied in solution by means of NMR spectroscopy and molecular dynamics in H2O. At a temperature of 269 K, a 50/50 mixture of two dumbbell structures (denoted L2L2 and L2L4) is present. The L2L2 form contains three Watson-Crick C-G base pairs and two two-residue loops is opposite parts of the molecule. On raising the temperature from 269 K to 314 K, the L2L4 conformer becomes increasingly dominant (95% at 314 K). This conformer has a partially disrupted G(anti)-C(syn) closing base pair in the 5'-GTTC-3' loop with only one remaining (solvent-accessible) hydrogen bond between NH alpha of the cytosine dC(1) and O6 of the guanine dG(8). The opposite 5'-CTTG-3' loop remains stable. The two conformers occur in slow equilibrium (rate constant 2-20 s-1). Structure determination of the L2L2 and L2L4 forms was performed with the aid of a full relaxation matrix approach (IRMA) in combination with restrained MD. Torsional information was obtained from coupling constants. Coupling constant analysis (3JHH, 3JHP, 3JCP) gave detailed information about the local geometry around backbone torsion angles beta, gamma, delta, and epsilon, revealing a relatively high flexibility of the 5'-GTTC-3' loop. The values of the coupling constants are virtually temperature-independent. 'Weakly constrained' molecular dynamics in solvent was used to sample the conformational space of the dumbbell. The relaxation matrices from the MD simulation were averaged over to predict dynamic NOE volumes. In order to account for the 1:1 conformational mixture of L2L2 and L2L4 present at 271 K, we also included S2 factors and averaging of the -averaged relaxation matrices. On matrix averaging, the agreement of NOE volumes with experiment improved significantly for protons located in the thermodynamically less stable 5'-GTTC-3' loop. The difference in stability of the 5'-CTTG-3' and 5'-GTTC-3' loops is mainly caused by differences in the number of potential hydrogen bonds in the minor groove and differences in stacking overlap of the base pairs closing the minihairpin loops. The syn conformation for dC(1), favored at high temperature, is stabilized by solvation in the major groove. However, the conformational properties of the dC(1) base, as deduced from R-factor analysis and MD simulations, include a large flexibility about torsion angle chi.

DNA, Circular↗
PubMed1994

NMR studies and conformational analysis of a DNA four-way junction formed in a linear synthetic oligonucleotide.

A linear DNA oligomer (M(r) 14,000, 46 nucleotides) was especially designed, chemically synthesized, and studied by means of 1H NMR spectroscopy. The design of the oligomer was guided by the idea that incorporation of three short palindromic sequences, each interspersed by 5'-CTTG-3' motifs at predetermined positions in the oligomer, would give rise to the formation of three stable minihairpin loops [Ippel, J. H., et al. (1992) J. Biomol. Struct. Dyn. 9, 1-16], which in turn were expected to encourage further folding of the strand into a stable four-way junction containing three "hairpin" arms and an open-ended duplex stem as the fourth arm. Linear DNA four-way junctions constructed according to this concept can be more compact and are therefore expected to be more suitable as model compounds for conformational studies compared to junctions that are built from two or more separate strands. A stable cruciform conformation was substantiated for the 46-mer in aqueous solution in the presence of Mg2+. Complete sequential 1H NMR assignments of the nonexchangeable protons (except H4', H5', and H5") were obtained with the aid of NOESY and HOHAHA experiments. The NMR data gave evidence for the expected existence of minihairpin-loop structures at the three 5'-CTTG-3' motifs in the sequence. The complementary stem domains adopt a regular B-DNA form. Watson-Crick type base pairing is preserved for all residues in the stem domains, including the residues at the center of the junction. A systematic investigation of the interresidual NOEs observed between the protons of the eight central residues revealed the complete stacking pattern of the residues at the branch point.

Base Sequence↗
PubMed1994

Conformation analysis of 3'-fluorinated A(2'-5')A(2'-5')A fragments. Relation between conformation and biological activity.

A one- and two-dimensional NMR study has been performed on seven A(2'-5')A(2'-5')A fragments containing 9-(3'-fluoro-3'-deoxy-beta-D-xylofuranosyl)-adenine (AF) or 3'-fluoro-3'-deoxyadenosine (AF) residues at different positions, and on the corresponding monomers. A(2'-5')A(2'-5')A served as a reference compound. The fluoro substituent governs the conformation of the sugar ring: an AF residue displays mainly N-type sugar and the ring is considerably flattened (phi N approximately 30 degrees) compared to AF residues (phi S approximately 40 degrees), which exhibit almost pure S-type conformation. Moreover, in AF moieties the rotamer distribution around torsion angle gamma (O5'-C5'-C4'-C3') and the base orientation are influenced to a large extent by the presence of the fluorine substituent. The sugar rings of nonfluorinated residues in the trimers appear rather flexible. A possible correlation between the conformational characteristics of the fluorinated fragments and their biological activity has been found: the fragments that meet the prerequisites for binding to RNase L indeed show enhanced binding to this endonuclease. Furthermore, substitution of the 3'-OH group of the second residue by hydrogen or of the 3'-OH group of the 2'-terminal residue by fluorine or hydrogen results in increased resistance towards 2'-5'-phosphodiesterase.

Adenine Nucleotides↗
PubMed1992

Heteronuclear NMR of DNA with the heteronucleus in natural abundance: facilitated assignment and extraction of coupling constants.

Two heteronuclear proton-carbon NMR experiments are applied to the DNA-octamer d(TTGGCCAA)2 with carbon in natural abundance. They lead to a complete assignment of the carbon resonances of the sugars and bases. In addition, several heteronuclear coupling constants, proton-carbon as well as proton-phosphorous and phosphorous-carbon, were determined. The information can be obtained in a reasonable measuring time and offers valuable information for a detailed picture of DNA structure.

Base Sequence↗
PubMed1992

An NMR study of the conformation and thermodynamics of the circular dumbbell d [formula: see text] Slow exchange between two- and four-membered hairpin loops.

The circular DNA decamer 5'-d [formula: see text] 3' is studied in solution by means of NMR spectroscopy. At low temperature the molecule adopts a dumbbell structure with three Watson-Crick C-G base pairs and two two-residue loops in opposite parts of the molecule. On raising the temperature another conformer appears, in which the closing C-G base pair in the 5'-GTTC-3' loop is disrupted, whereas the opposite 5'-CTTG-3' loop remains stable. The two conformers are in slow equilibrium over a limited temperature range.

Base Composition↗
PubMed1990

Hairpin structures in DNA containing arabinofuranosylcytosine. A combination of nuclear magnetic resonance and molecular dynamics.

Nuclear magnetic resonance (NMR) and model-building studies were carried out on the hairpin form of the octamer d(CGaCTAGCG) (aC = arabinofuranosylcytosine), referred to as the TA compound. The nonexchangeable protons of the TA compound were assigned by means of nuclear Overhauser effect spectroscopy (NOESY) and correlated spectroscopy (COSY). From a detailed analysis of the coupling data and of the NOESY spectra the following conclusions are reached: (i) The hairpin consists of a stem of three Watson-Crick type base pairs, and the two remaining residues, T(4) and dA(5), participate in a loop. (ii) All sugar rings show conformational flexibility although a strong preference for the S-type (C2'-endo) conformer is observed. (iii) The thymine does not stack upon the 3' side of the stem as expected, but swings into the minor groove. (This folding principle of the loop involves an unusual alpha t conformer in residue T(4).) (iv) At the 5'-3' loop-stem junction a stacking discontinuity occurs as a consequence of a sharp turn in that part of the backbone, caused by the unusual beta + and gamma t torsion angles in residue dG(6). (v) The A base slides over the 5' side of the stem to stack upon the aC(3) residue at the 3' side of the stem in an antiparallel fashion. On the basis of J couplings and a set of approximate proton-proton distances from NOE cross peaks, a model for the hairpin was constructed. This model was then refined by using an iterative relaxation matrix approach (IRMA) in combination with restrained molecular dynamics calculations. The resulting final model satisfactorily explains all the distance constraints.

Base Sequence↗
PubMed1989

Conformational consequences of the incorporation of arabinofuranosylcytidine in DNA. An NMR study of the DNA fragments d(CGCTAGCG) and d(CGaCTAGCG) in solution.

The self-complementary octamers d(CGCTAGCG) and d(CGaCTAGCG) (aC, arabinofuranosylcytidine) were studied by means of NMR spectroscopy. It is shown that d(CGaCTAGCG), under suitable conditions of oligonucleotide concentration, ionic strength and temperature, exclusively adopts a hairpin structure. However, under the same experimental conditions (5 mM DNA, no added salt, 295 K) d(CGCTAGCG) mainly adopts a B-DNA-type duplex. At lower temperatures (less than or equal to 290 K) the hairpin form of d(CGaCTAGCG) occurs in slow exchange with an intact B-DNA-type duplex. When the DNA concentration of d(CGCTAGCG) is dramatically reduced (less than or equal to 0.5 mM) the hairpin form becomes highly favoured at the expense of the dimer. Moreover, proton-chemical-shift considerations indicate that the structural features of the hairpin structure of d(CGCTAGCG) mimic, in part, those of the modified octamer d(CGaCTAGCG), i.e. a loop comprising only the two central residues with the thymine located into the minor groove (Pieters, J. M. L., de Vroom, E., van der Marel, G. A., van Boom, J. H., Koning, T. M. G., Kaptein, R. and Altona, C. unpublished results). Thermodynamic analysis of d(CGCTAGCG) yields an average Tmd value of 342 K (1 M DNA) and a delta Hod value of -266 kJ/mol for the dimer/coil transition and an average Tmh value of 321 K and delta Hoh - 102 kJ/mol for the hairpin/coil equilibrium. For the duplex/coil equilibrium of d(CGaCTAGCG) an average Tmd value of 336 K (1 M DNA) and delta Hod value of -253 kJ/mol are deduced. The hairpin/coil transition of d(CGaCTAGCG) is characterized by a delta Hoh value of -104 kJ/mol and an average Tmh value of 331 K. It is concluded that incorporation of an arabinofuranosylcytidine in the octamer d(CGaCTAGCG) results in stabilization of the hairpin form, whereas the dimer is destablized by two aC.dG base pairs.

Base Sequence↗