Search PubMed⌕ Search

Biomedical subjects

Britt Hedman

Publications and source records attributed to Britt Hedman.

At least 37 records · Page 2Linked to original sources

Geometric and electronic structure of the heme-peroxo-copper complex [(F8TPP)FeIII-(O22-)-CuII(TMPA)](ClO4).

The geometric and electronic structure of the untethered heme-peroxo-copper model complex [(F(8)TPP)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](ClO(4)) (1) has been investigated using Cu and Fe K-edge EXAFS spectroscopy and density functional theory calculations in order to describe its geometric and electronic structure. The Fe and Cu K-edge EXAFS data were fit with a Cu...Fe distance of approximately 3.72 A. Spin-unrestricted DFT calculations for the S(T) = 2 spin state were performed on [(P)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](+) as a model of 1. The peroxo unit is bound end-on to the copper, and side-on to the high-spin iron, for an overall mu-eta(1):eta(2) coordination mode. The calculated Cu...Fe distance is approximately 0.3 A longer than that observed experimentally. Reoptimization of [(P)Fe(III)-(O(2)(2)(-))-Cu(II)(TMPA)](+) with a 3.7 A Cu...Fe constrained distance results in a similar energy and structure that retains the overall mu-eta(1):eta(2)-peroxo coordination mode. The primary bonding interaction between the copper and the peroxide involves electron donation into the half-occupied Cu d(z)2 orbital from the peroxide pi(sigma) orbital. In the case of the Fe(III)-peroxide eta(2) bond, the two major components arise from the donor interactions of the peroxide pi*(sigma) and pi*(v) orbitals with the Fe d(xz) and d(xy) orbitals, which give rise to sigma and delta bonds, respectively. The pi*(sigma) interaction with both the half-occupied d(z)2 orbital on the copper (eta(1)) and the d(xz) orbital on the iron (eta(2)), provides an effective superexchange pathway for strong antiferromagnetic coupling between the metal centers.

Copper↗

Sulfur K-edge XAS and DFT calculations on P450 model complexes: effects of hydrogen bonding on electronic structure and redox potentials.

Hydrogen bonding (H-bonding) is generally thought to play an important role in tuning the electronic structure and reactivity of metal-sulfur sites in proteins. To develop a quantitative understanding of this effect, S K-edge X-ray absorption spectroscopy (XAS) has been employed to directly probe ligand-metal bond covalency, where it has been found that protein active sites are significantly less covalent than their related model complexes. Sulfur K-edge XAS data are reported here on a series of P450 model complexes with increasing H-bonding to the ligated thiolate from its substituent. The XAS spectroscopic results show a dramatic decrease in preedge intensity. DFT calculations reproduce these effects and show that the observed changes are in fact solely due to H-bonding and not from the inductive effect of the substituent on the thiolate. These calculations also indicate that the H-bonding interaction in these systems is mainly dipolar in nature. The -2.5 kcal/mol energy of the H-bonding interaction was small relative to the large change in ligand-metal bond covalency (30%) observed in the data. A bond decomposition analysis of the total energy is developed to correlate the preedge intensity change to the change in Fe-S bonding interaction on H-bonding. This effect is greater for the reduced than the oxidized state, leading to a 260 mV increase in the redox potential. A simple model shows that E degrees should vary approximately linearly with the covalency of the Fe-S bond in the oxidized state, which can be determined directly from S K-edge XAS.

Binding Sites↗

A palladium-oxo complex. Stabilization of this proposed catalytic intermediate by an encapsulating polytungstate ligand.

A terminal Pd-oxo unit is reported. The unit is encapsulated in a cavity defined by two [A-alpha-PW9O34]9- units fused together by one [WO(OH2)]4+ center and forms from Pd(II) in buffered media in the presence of O2. Both X-ray diffraction and EXAFS data are consistent with a Pd-oxo bond distance of ca. 1.65 A. 17O NMR studies confirm that the solid-state structure is maintained in solution.

Catalysis↗

Spectroscopic and DFT investigation of [M{HB(3,5-iPr2pz)3}(SC6F5)] (M = Mn, Fe, Co, Ni, Cu, and Zn) model complexes: periodic trends in metal-thiolate bonding.

A series of metal-varied [ML(SC6F5)] model complexes (where L = hydrotris(3,5-diisopropyl-1-pyrazolyl)borate and M = Mn, Fe, Co, Ni, Cu, and Zn) related to blue copper proteins has been studied by a combination of absorption, MCD, resonance Raman, and S K-edge X-ray absorption spectroscopies. Density functional calculations have been used to characterize these complexes and calculate their spectra. The observed variations in geometry, spectra, and bond energies are interpreted in terms of changes in the nature of metal-ligand bonding interactions. The metal 3d-ligand orbital interaction, which contributes to covalent bonding in these complexes, becomes stronger going from Mn(II) to Co(II) (the sigma contribution) and to Cu(II) (the pi contribution). This change in the covalency results from the increased effective nuclear charge of the metal atom in going from Mn(II) to Zn(II) and the change in the 3d orbital populations (d5-->d10). Ionic bonding also plays an important role in determining the overall strength of the ML(+)-SC6F5(-) interaction. However, there is a compensating effect: as the covalent contribution to the metal-ligand bonding increases, the ionic contribution decreases. These results provide insight into the Irving-Williams series, where it is found that the bonding of the ligand being replaced by the thiolate makes a major contribution to the observed order of the stability constants over the series of metal ions.

Borates↗

X-ray absorption spectroscopic study of the reduced hydroxylases of methane monooxygenase and toluene/o-xylene monooxygenase: differences in active site structure and effects of the coupling proteins MMOB and ToMOD.

The diiron active sites of the reduced hydroxylases from methane monooxygenase (MMOH(red)) and toluene/o-xylene monooxygenase (ToMOH(red)) have been investigated by X-ray absorption spectroscopy (XAS). Results of Fe K-edge and extended X-ray absorption fine structure analysis reveal subtle differences between the hydroxylases that may be correlated to access of the active site. XAS data were also recorded for each hydroxylase in the presence of its respective coupling protein. MMOB affects the outer-shell scattering contributions in the diiron site of MMOH(red), whereas ToMOD exerts its main effect on the first-shell ligation of ToMOH(red); it also causes a slight decrease in the Fe-Fe separation. These results provide an initial step toward delineating the differences in structure and reactivity in bacterial multicomponent monooxygenase proteins.

Bacteria↗

Tyrosinase reactivity in a model complex: an alternative hydroxylation mechanism.

The binuclear copper enzyme tyrosinase activates O2 to form a mu-eta2:eta2-peroxodicopper(II) complex, which oxidizes phenols to catechols. Here, a synthetic mu-eta2:eta2-peroxodicopper(II) complex, with an absorption spectrum similar to that of the enzymatic active oxidant, is reported to rapidly hydroxylate phenolates at -80 degrees C. Upon phenolate addition at extreme temperature in solution (-120 degrees C), a reactive intermediate consistent with a bis-mu-oxodicopper(III)-phenolate complex, with the O-O bond fully cleaved, is observed experimentally. The subsequent hydroxylation step has the hallmarks of an electrophilic aromatic substitution mechanism, similar to tyrosinase. Overall, the evidence for sequential O-O bond cleavage and C-O bond formation in this synthetic complex suggests an alternative intimate mechanism to the concerted or late stage O-O bond scission generally accepted for the phenol hydroxylation reaction performed by tyrosinase.

Binding Sites↗

Spectroscopic and density functional studies of the red copper site in nitrosocyanin: role of the protein in determining active site geometric and electronic structure.

The electronic structure of the red copper site in nitrosocyanin is defined relative to that of the well understood blue copper site of plastocyanin by using low-temperature absorption, circular dichroism, magnetic circular dichroism, resonance Raman, EPR and X-ray absorption spectroscopies, combined with DFT calculations. These studies indicate that the principal electronic structure change in the red copper site is the sigma rather than the pi donor interaction of the cysteine sulfur with the Cu 3d(x2-y2) redox active molecular orbital (RAMO). Further, MCD data show that there is an increase in ligand field strength due to an increase in coordination number, whereas resonance Raman spectra indicate a weaker Cu-S bond. The latter is supported by the S K-edge data, which demonstrate a less covalent thiolate interaction with the RAMO of nitrosocyanin at 20% relative to plastocyanin at 38%. EXAFS results give a longer Cu-S(Cys) bond distance in nitrosocyanin (2.28 A) compared to plastocyanin (2.08 A) and also show a large change in structure with reduction of the red copper site. The red copper site is the only presently known blue copper-related site with an exogenous water coordinated to the copper. Density functional calculations reproduce the experimental properties and are used to determine the specific protein structure contributions to exogenous ligand binding in red copper. The relative orientation of the CuNNS and the CuSC(beta) planes (determined by the protein sequence) is found to be key in generating an exchangeable coordination position at the red copper active site. The exogenous water ligation at the red copper active site greatly increases the reorganization energy (by approximately 1.0 eV) relative to that of the blue copper protein site, making the red site unfavorable for fast outer-sphere electron transfer, while providing an exchangeable coordination position for inner-sphere electron transfer.

Bacterial Proteins↗

X-ray absorption spectroscopic investigation of the spin-transition character in a series of single-site perturbed iron(II) complexes.

Select ferrous spin-transition complexes with the pentadentate ligand 2,6-bis(bis(2-pyridyl)methoxymethane)pyridine (PY5) were examined using variable-temperature solution solid-state magnetic susceptibility, crystallography, X-ray absorption spectroscopy (XAS), and UV/vis absorption spectroscopy. Altering the single exogeneous ligand, X, of [Fe(PY5)(X)]n)+ is sufficient to change the spin-state of the complexes. When X is the weak-field ligand Cl-, the resultant Fe complex is high-spin from 4 to 300 K, whereas the stronger-field ligand MeCN generates a low-spin complex over this temperature range. With intermediate-strength exogenous ligands (X = N3-, MeOH), the complexes undergo a spin-transition. [Fe(PY5)(N3)]+, as a crystalline solid, transitions gradually from a high-spin to a low-spin complex as the temperature is decreased, as evidenced by X-ray crystallography and solid-state magnetic susceptibility measurements. The spin-transition is also evident from changes in the pre-edge and EXAFS regions of the XAS Fe K-edge spectra on a ground crystalline sample. The spin-transition observed with [Fe(PY5)(MeOH)]2+ appears abrupt by solid-state magnetic susceptibility measurements, but gradual by XAS analysis, differences attributed to sample preparation. This research highlights the strengths of XAS in determining the electronic and geometric structure of such spin-transition complexes and underscores the importance of identical sample preparation in the investigation of these physical properties.

Crystallography, X-Ray↗

Dioxygen activation at a single copper site: structure, bonding, and mechanism of formation of 1:1 Cu-O2 adducts.

To evaluate the fundamental process of O(2) activation at a single copper site that occurs in biological and catalytic systems, a detailed study of O(2) binding to Cu(I) complexes of beta-diketiminate ligands L (L(1) = backbone Me; L(2) = backbone tBu) by X-ray crystallography, X-ray absorption spectroscopy (XAS), cryogenic stopped-flow kinetics, and theoretical calculations was performed. Using synchrotron radiation, an X-ray diffraction data set for L(2)CuO(2) was acquired, which led to structural parameters in close agreement to theoretical predictions. Significant Cu(III)-peroxo character for the complex was corroborated by XAS. On the basis of stopped-flow kinetics data and theoretical calculations for the oxygenation of L(1)Cu(RCN) (R = alkyl, aryl) in THF and THF/RCN mixtures between 193 and 233 K, a dual pathway mechanism is proposed involving (a) rate-determining solvolysis of RCN by THF followed by rapid oxygenation of L(1)Cu(THF) and (b) direct, bimolecular oxygenation of L(1)Cu(RCN) via an associative process.

Binding Sites↗

Ligand K-edge X-ray absorption spectroscopy and DFT calculations on [Fe3S4]0,+ clusters: delocalization, redox, and effect of the protein environment.

Ligand K-edge XAS of an [Fe3S4]0 model complex is reported. The pre-edge can be resolved into contributions from the mu(2)S(sulfide), mu(3)S(sulfide), and S(thiolate) ligands. The average ligand-metal bond covalencies obtained from these pre-edges are further distributed between Fe(3+) and Fe(2.5+) components using DFT calculations. The bridging ligand covalency in the [Fe2S2]+ subsite of the [Fe3S4]0 cluster is found to be significantly lower than its value in a reduced [Fe2S2] cluster (38% vs 61%, respectively). This lowered bridging ligand covalency reduces the superexchange coupling parameter J relative to its value in a reduced [Fe2S2]+ site (-146 cm(-1) vs -360 cm(-1), respectively). This decrease in J, along with estimates of the double exchange parameter B and vibronic coupling parameter lambda2/k(-), leads to an S = 2 delocalized ground state in the [Fe3S4]0 cluster. The S K-edge XAS of the protein ferredoxin II (Fd II) from the D. gigas active site shows a decrease in covalency compared to the model complex, in the same oxidation state, which correlates with the number of H-bonding interactions to specific sulfur ligands present in the active site. The changes in ligand-metal bond covalencies upon redox compared with DFT calculations indicate that the redox reaction involves a two-electron change (one-electron ionization plus a spin change of a second electron) with significant electronic relaxation. The presence of the redox inactive Fe(3+) center is found to decrease the barrier of the redox process in the [Fe3S4] cluster due to its strong antiferromagnetic coupling with the redox active Fe2S2 subsite.

Binding Sites↗

High covalence in CuSO4 and the radicalization of sulfate: an X-ray absorption and density functional study.

Sulfur K-edge X-ray absorption spectroscopy (XAS) of anhydrous CuSO(4) reveals a well-resolved preedge transition feature at 2478.8 eV that has no counterpart in the XAS spectra of anhydrous ZnSO(4) or copper sulfate pentahydrate. Similar but weaker preedge features occur in the sulfur K-edge XAS spectra of [Cu(itao)SO(4)] (2478.4 eV) and [Cu[(CH(3))(6)tren]SO(4)] (2477.7 eV). Preedge features in the XAS spectra of transition metal ligands are generally attributed to covalent delocalization of a metal d-orbital hole into a ligand-based orbital. Copper L-edge XAS of CuSO(4) revealed that 56% of the Cu(II) 3d hole is delocalized onto the sulfate ligand. Hybrid density functional calculations on the two most realistic models of the covalent delocalization pathways in CuSO(4) indicate about 50% electron delocalization onto the sulfate oxygen-based 2p orbitals; however, at most 14% of that can be found on sulfate sulfur. Both experimental and computational results indicated that the high covalence of anhydrous CuSO(4) has made sulfate more like the radical monoanion, inducing an extensive mixing and redistribution of sulfur 3p-based unoccupied orbitals to lower energy in comparison to sulfate in ZnSO(4). It is this redistribution, rather than a direct covalent interaction between Cu(II) and sulfur, that is the origin of the observed sulfur XAS preedge feature. From pseudo-Voigt fits to the CuSO(4) sulfur K-edge XAS spectrum, a ground-state 3p character of 6% was quantified for the orbital contributing to the preedge transition, in reasonable agreement with the DFT calculation. Similar XAS fits indicated 2% sulfur 3p character for the preedge transition orbitals in [Cu(itao)SO(4)] and [Cu[(CH(3))(6)tren]SO(4)]. The covalent radicalization of ligands similar to sulfate, with consequent energy redistribution of the virtual orbitals, represents a new mechanism for the induction of ligand preedge XAS features. The high covalence of the Cu sites in CuSO(4) was found to be similar to that of Cu sites in oxidized cupredoxins, including its anistropic nature, and can serve as the simplest inorganic examples of intramolecular electron-transfer processes.

Absorptiometry, Photon↗

Mo K- and L-edge X-ray absorption spectroscopic study of the ADP.AlF4--stabilized nitrogenase complex: comparison with MoFe protein in solution and single crystal.

The utility of using X-ray absorption spectroscopy (XAS) to study metalloproteins and, specifically, the enzyme complex nitrogenase, is highlighted by this study comparing both the structural and Mo-localized electronic features of the iron-molybdenum cofactor (FeMoco) in isolated MoFe protein and in the ADP.AlF4--stabilized complex of the MoFe protein with the Fe protein. No major differences are found at Mo between the two protein forms. The excellent quality of the data at both the Mo K and L edges will provide a baseline for analysis of other intermediates in the nitrogenase cycle. A new capability to delineate various contributions in the resting state of FeMoco is being pursued through polarized single-crystal XAS. The initial results point to the feasibility of using this technique for the analysis of scattering from the as yet unidentified atom at the center of FeMoco.

Adenosine Diphosphate↗

Integrated instrumentation for combined polarized single-crystal XAS and diffraction data acquisition for biological applications.

Single-crystal X-ray absorption spectroscopy (XAS) instrumentation, allowing sequential integrated XAS and crystallographic data acquisition during the same experiment and on the same beamline, has been developed for SSRL beamline 9-3, a wiggler side station dedicated to general user biological XAS. The implementation includes a Huber kappa goniometer, Canberra 30-element Ge detector for XAS data collection, open-flow LHe and LN2 crystal coolers, a microscope for crystal alignment in the beam, and a MarCCD crystallography detector. The kappa goniometer allows a large accessible angular range with an open geometry, affording access to detectors and open stream coolers, as well as future instrumentation. Applicable standard hardware on SSRL crystallography beamlines has been incorporated, with crystallographic data collection controlled via the Blu-Ice software developed by the SSRL SMB macromolecular crystallography group. XAS data collection is handled through the SSRL standard XAS-Collect software. Initial diffraction and XAS data from single crystals using an open-flow cryostat are presented. The instrument will be available to general users after the SPEAR3 upgrade in 2004, and future expansion for use in high-throughput structural genomics XAS is proposed.

Crystallography, X-Ray↗

Determination by X-ray absorption spectroscopy of the Fe-Fe separation in the oxidized form of the hydroxylase of methane monooxygenase alone and in the presence of MMOD.

The diiron active site in the hydroxylase of Methylococcus capsulatus (Bath) methane monooxygenase (MMOH) has been studied in the oxidized form by X-ray absorption spectroscopy (XAS). Previous investigations by XAS and X-ray crystallography have identified two different distances (3.0 and 3.4 angstroms) between the two Fe atoms in the dinuclear site. The present study has employed a systematic extended X-ray absorption fine structure (EXAFS) fitting methodology, utilizing known and simulated active site and relevant model structures, to determine unambiguously the Fe-Fe separation in the oxidized form of MMOH. Consistent and unique fits were only possible for an Fe-Fe distance of 3.0 angstroms. This methodology was then applied to study potential changes in the active site local structure in the presence of MMOD, a protein of unknown function in multicomponent MMO. Fe K-edge and EXAFS analyses revealed negligible changes in the diiron site electronic and geometric structure upon addition of MMOD to oxidized MMOH.

Binding Sites↗

Ligand K-edge X-ray absorption spectroscopy of [Fe4S4]1+,2+,3+ clusters: changes in bonding and electronic relaxation upon redox.

Sulfur K-edge X-ray absorption spectroscopy (XAS) is reported for [Fe(4)S(4)](1+,2+,3+) clusters. The results are quantitatively and qualitatively compared with DFT calculations. The change in covalency upon redox in both the [Fe(4)S(4)](1+/2+) (ferredoxin) and the [Fe(4)S(4)](2+/3+) (HiPIP) couple are much larger than that expected from just the change in number of 3d holes. Moreover, the change in the HiPIP couple is higher than that of the ferredoxin couple. These changes in electronic structure are analyzed using DFT calculations in terms of contributions from the nature of the redox active molecular orbital (RAMO) and electronic relaxation. The results indicate that the RAMO of HiPIP has 50% ligand character, and hence, the HiPIP redox couple involves limited electronic relaxation. Alternatively, the RAMO of the ferredoxin couple is metal-based, and the ferredoxin redox couple involves extensive electronic relaxation. The contributions of these RAMO differences to ET processes in the different proteins are discussed.

Electron Transport↗

Comparison of iron-molybdenum cofactor-deficient nitrogenase MoFe proteins by X-ray absorption spectroscopy: implications for P-cluster biosynthesis.

Nitrogenase, the enzyme system responsible for biological nitrogen fixation, is believed to utilize two unique metalloclusters in catalysis. There is considerable interest in understanding how these metalloclusters are assembled in vivo. It has been presumed that immature iron-molybdenum cofactor-deficient nitrogenase MoFe proteins contain the P-cluster, although no biosynthetic pathway for the assembly of this complex cluster has been identified as yet. Through the comparison by iron K-edge x-ray absorption edge and extended fine structure analyses of cofactor-deficient MoFe proteins resulting from nifH and nifB deletion strains of Azotobacter vinelandii, a novel [Fe-S] cluster is identified in the DeltanifH MoFe protein. The iron-iron scattering displayed by the DeltanifH MoFe protein is more similar to that of a standard [Fe(4)S(4)]-containing protein than that of the DeltanifB MoFe protein, which is shown to contain a "normal" P-cluster. The iron-sulfur scattering of the DeltanifH MoFe protein, however, indicates differences in its cluster from an [Fe(4)S(4)](Cys)(4) site that may be consistent with the presence of either oxygenic or nitrogenic ligation. Based on these results, models for the [Fe-S] center in the DeltanifH MoFe protein are constructed, the most likely of which consist of two separate [Fe(4)S(4)] sites, each with some non-cysteinyl coordination. This type of model suggests that the P-cluster is formed by the condensation of two [Fe(4)S(4)] fragments, possibly concomitant with Fe protein (NifH)-induced conformational change.

Azotobacter vinelandii↗

S K-edge X-ray absorption spectroscopic investigation of the Ni-containing superoxide dismutase active site: new structural insight into the mechanism.

Superoxide dismutases protect cells from the toxic effects of reactive oxygen species derived from superoxide. Nickel-containing superoxide dismutases (NiSOD), found in Streptomyces species and in cyanobacteria, are distinct from Mn-, Fe-, or Cu/Zn-containing SODs in amino acid sequence and metal ligand environment. Sulfur K-edge X-ray absorption spectroscopic investigations were carried out for a series of mono- and binuclear Ni model compounds with varying sulfur ligation, and for oxidized and reduced NiSOD to elucidate the types of Ni-S interactions found in the two oxidation states. The S K-edge XAS spectra clearly indicate the presence of Ni(III)-bound terminal thiolate in the oxidized enzyme and the absence of such coordination to Ni(II) in the peroxide-reduced enzyme. This striking change in the S ligation for Ni with redox suggests that, upon peroxide reduction, an electron is transferred to the Ni(III) site and the terminal thiolate becomes protonated, providing an efficient mechanism for proton-coupled electron transfer.

Binding Sites↗

L-edge X-ray absorption spectroscopy of non-heme iron sites: experimental determination of differential orbital covalency.

X-ray absorption spectroscopy has been utilized to obtain the L-edge multiplet spectra for a series of non-heme ferric and ferrous complexes. Using these data, a methodology for determining the total covalency and the differential orbital covalency (DOC), that is, differences in covalency in the different symmetry sets of the d orbitals, has been developed. The integrated L-edge intensity is proportional to the number of one-electron transition pathways to the unoccupied molecular orbitals as well as to the covalency of the iron site, which reduces the total L-edge intensity and redistributes intensity, producing shake-up satellites. Furthermore, differential orbital covalency leads to differences in intensity for the different symmetry sets of orbitals and, thus, further modifies the experimental spectra. The ligand field multiplet model commonly used to simulate L-edge spectra does not adequately reproduce the spectral features, especially the charge transfer satellites. The inclusion of charge transfer states with differences in covalency gives excellent fits to the data and experimental estimates of the different contributions of charge transfer shake-up pathways to the t(2g) and e(g) symmetry orbitals. The resulting experimentally determined DOC is compared to values calculated from density functional theory and used to understand chemical trends in high- and low-spin ferrous and ferric complexes with different covalent environments. The utility of this method toward problems in bioinorganic chemistry is discussed.

Absorptiometry, Photon↗