Search PubMed⌕ Search

Biomedical subjects

Bahram Javidi

Publications and source records attributed to Bahram Javidi.

At least 19 recordsLinked to original sources
PubMed2007

Theoretical analysis of three-dimensional imaging and recognition of micro-organisms with a single-exposure on-line holographic microscope.

Single-exposure on-line (SEOL) digital holography is a recently proposed technique for monitoring, visualization, and recognition of three-dimensional (3D) objects. In contrast to traditional multi-exposure on-line digital holography, it uses only one exposure, which makes it particularly suitable for imaging and recognizing moving micro-organisms. However, the cost of using only one exposure is the superposition of a conjugate image on the desired reconstructed image. The influence of the conjugate image on the visualization and recognition performance is investigated. The conditions for which the cross-talk noise induced by the conjugate image is negligible are derived. It is demonstrated that with conditions common in imaging of microscopic 3D biological objects, SEOL digital holography is highly tolerant of cross-talk noise induced by the conjugate image.

Algorithms↗
PubMed2006

Pixel patterns for voxels in a contact-type three-dimensional imaging system for full-parallax image display.

Incomplete voxels, which can be seen only at a part of the viewing zone's cross section in the optical configuration of a full parallax multiview imaging system based on a two-dimensional point light source array, are identified. Their corresponding pixel patterns are found to maximize the space where the voxels can exist in the configuration and to increase the voxel resolution of the displayable three-dimensional images. Furthermore, the pixel patterns for the rhomb-shaped pixel cells are also defined, and some problems related to voxel-based image synthesis are discussed.

Journal Article↗
PubMed2006

Reconstruction of partially occluded objects encoded in three-dimensional scenes by using digital holograms.

We propose a task-specific digital holographic capture system for three-dimensional scenes, which can reduce the amount of data sent from the camera system to the receiver and can effectively reconstruct partially occluded objects. The system requires knowledge of the object of interest, but it does not require a priori knowledge of either the occlusion or the distance the object is from the camera. Subwindows of the camera-plane Fresnel field are digitally propagated to reveal different perspectives of the scene, and these are combined to overcome the unknown foreground occlusions. The nature of the occlusions and the effect of subwindows are analyzed thoroughly by using the Wigner distribution function. We demonstrate that a careful combination of reconstructions from subwindows can reveal features that are not apparent in a reconstruction from the whole hologram. We provide results by using optically captured digital holograms of real-world objects and simulated occlusions.

Journal Article↗
PubMed2006

Multidimensional optical sensor and imaging system.

We describe a multidimensional optical sensor and imaging system (MOSIS). Using a time-multiplexing, polarimetric, and multispectral imaging system, we are able to reconstruct a fully integrated multidimensional scene. Image fusion is used to integrate the multidimensional images. The fused image contains more information than the single two-dimensional and three-dimensional (3D) images. The multidimensional imaging system utilizes polarimetric imaging, multispectral imaging, 3D integral imaging with time and space multiplexing, and 3D image-fusion techniques to reconstruct the multidimensionally integrated scene. Optical experiments and computer simulations are presented.

Journal Article↗
PubMed2006

Three-dimensional recognition of occluded objects by using computational integral imaging.

We have proposed a method to recognize partially occluded three-dimensional (3D) objects by using 3D volumetric reconstruction integral imaging (II). An II system captures multiple perspectives of occluded objects by using a microlens array. The reconstruction of the occluded 3D scene and target recognition are done digitally to reduce the effects of the occlusion. To verify system performance, we have implemented an optimum filter for object recognition. Both two-dimensional (2D) images and 3D II volumetric reconstructed images are considered. The correlation results of occluded 3D images for volumetric reconstruction show substantial improvements compared with those for conventional 2D imaging of occluded images.

Algorithms↗
PubMed2006

Multifactor authentication reinforces optical security.

A new optical method to obtain multifactor image encoding and authentication is proposed. The encoded complex-amplitude image function fulfills the general requirements of invisible content, extreme difficulty in copying or counterfeiting, and real-time automatic verification. This optical technique is attractive for high-security purposes that require multifactor reliable authentication. A demonstration using a combination of biometric images and key codes is provided. Retina images, which are very effective for authentication, are used as biometric signals. To the best of our knowledge, this is the first report on combined multiple signal encoding and simultaneous AND authentications for optical security reinforcement.

Journal Article↗
PubMed2006

Improved-resolution digital holography using the generalized sampling theorem for locally band-limited fields.

We describe the recording conditions that, together with the appropriate numerical reconstruction process, permit high-lateral-resolution reconstruction of in-line digital holograms. By high resolution, we mean a resolution that is beyond the Nyquist frequency, which is achieved by common methods. The proposed method is based on a previously reported generalized sampling theory that presents the conditions to precisely reconstruct fields that in certain cases may be sampled with a sampling rate lower than the Nyquist rate. We examine the hologram-recording process in the Wigner space. On the basis of this analysis, we demonstrate a simple high-resolution numerical reconstruction method.

Journal Article↗
PubMed2005

Three-dimensional-object recognition by use of single-exposure on-axis digital holography.

On-axis phase-shifting digital holography requires recording of multiple holograms. We describe a novel real-time three-dimensional- (3-D-) object recognition system that uses single-exposure on-axis digital holography. In contrast to 3-D-object recognition by means of a conventional phase-shifting scheme that requires multiple exposures, our proposed method requires only a single digital hologram to be synthesized and used to recognize 3-D objects. A benefit of the proposed 3-D recognition method is enhanced practicality of digital holography for 3-D recognition in terms of its simplicity and greater robustness to external scene parameters such as moving targets and environmental noise factors. We show experimentally the utility of the single-exposure on-axis digital holography-based 3-D-object recognition method.

Journal Article↗
PubMed2005

Three-dimensional image fusion by use of multiwavelength digital holography.

We present three-dimensional (3D) image fusion by use of digital holography. We demonstrate experimentally that, through the image fusion technique with multiresolution wavelet decomposition, it is possible to increase the details and contrast of 3D reconstructed images obtained by multiwavelength digital holography. Although there is substantial activity in the fields of image fusion and holography, to the best of our knowledge, this is the first report of 3D image fusion by use of digital holography.

Algorithms↗
PubMed2005

Multifacet structure of observed reconstructed integral images.

Three-dimensional images generated by an integral imaging system suffer from degradations in the form of grid of multiple facets. This multifacet structure breaks the continuity of the observed image and therefore reduces its visual quality. We perform an analysis of this effect and present the guidelines in the design of lenslet imaging parameters for optimization of viewing conditions with respect to the multifacet degradation. We consider the optimization of the system in terms of field of view, observer position and pupil function, lenslet parameters, and type of reconstruction. Numerical tests are presented to verify the theoretical analysis.

Algorithms↗
PubMed2004

Integral imaging with improved depth of field by use of amplitude-modulated microlens arrays.

One of the main challenges in three-dimensional integral imaging is its limited depth of field. Such a limitation is imposed by diffraction, among other factors. The easiest way to improve the depth of field is by reducing the numerical aperture of the microlenses. However, such an improvement is obtained at the expense of an important deterioration in the spatial resolution. We propose a technique, which is novel in the context of integral imaging, for improving the depth of field with no deterioration of the spatial resolution. The technique, based on amplitude modulation of the array of phase elements, can substantially improve the figure of merit of the product of depth of the focus and the squared resolution.

Journal Article↗
PubMed2004

Three-dimensional polarimetric integral imaging.

A three-dimensional (3D) polarimetric image sensing and display technique based on integral imaging is proposed. Three-dimensional polarization distribution of reflected light from a 3D object can be measured as elemental image arrays by a rotating linear polarizer. After the measurement of the polarization of the 3D object, the 3D polarimetric object can be reconstructed optically by displaying the polarization-selected elemental images in spatial light modulators with two quarter-wave plates. Experimental demonstration of 3D polarimetric imaging of a 3D object attached to two orthogonal linear polarizers is presented. To the best of our knowledge, this is the first report on 3D polarimetric sensing imaging and 3D optical reconstruction by integral imaging.

Journal Article↗
PubMed2004

Viewing zones in three-dimensional imaging systems based on lenticular, parallax-barrier, and microlens-array plates.

The viewing zone of autostereoscopic imaging systems that use lenticular, parallax-barrier, and microlens-array plates as the viewing-zone-forming optics is analyzed in order to verify the image-quality differences between different locations of the zone. The viewing zone consists of many subzones. The images seen at most of these subzones are composed of at least one image strip selected from the total number of different view images displayed. These different view images are not mixed but patched to form a complete image. This image patching deteriorates the quality of the image seen at different subzones. We attempt to quantify the quality of the image seen at these viewing subzones by taking the inverse of the number of different view images patched together at different subzones. Although the combined viewing zone can be extended to almost all of the front space of the imaging system, in reality it is limited mainly by the image quality.

Algorithms↗
PubMed2004

Effects of device resolution on three-dimensional integral imaging.

We present the effects of a finite number of pixels in elemental images on the resolution and the depth of focus in three-dimensional integral imaging (II). We show that the number of pixels in elemental images determines not only the lateral resolution but also the depth resolution. The minimum number of pixels required in each elemental image is calculated to avoid depth-of-focus degradation. We evaluate how II system performance degrades as the number of pixels in each elemental image changes. The product of the depth of focus and the lateral resolution squared is used as the performance metric.

Journal Article↗
PubMed2004

Three-dimensional integral imaging of micro-objects.

We propose a method for displaying micro-objects in space that is based on three-dimensional (3D) integral imaging, in which elemental images are calculated from a two-dimensional sampling of the optical field along different depths by use of confocal scanning microscopy. Experimental results are presented to demonstrate that a uniformly magnified 3D biological specimen can be displayed in space, and thus integral imaging can be used for 3D display of confocal microscopy. To the best of our knowledge, this is the first report of 3D integral imaging of (semitransparent) micro-objects.

Algorithms↗
PubMed2004

Secure holographic memory by double-random polarization encryption.

A novel optical encryption based on polarization is proposed and applied to a holographic memory system. Original binary data are described as two orthogonal linear polarization states. These input polarization states can be modulated by use of two polarization-modulation masks located at the input and the Fourier planes. Each modulation mask can convert an input polarization state into a random polarization state. Once encrypted, the polarization state is recorded as a hologram. For the decryption, the hologram can generate a vector phase-conjugate beam. When the same polarization-modulation masks are used, the vector phase-conjugate readout can cancel the polarization modulation at each mask, and the original polarization state can be recovered. The encryption of the proposed method is evaluated numerically. We also present experimental results by demonstrating holographic recording in a bacteriorhodopsin film.

Journal Article↗
PubMed2004

Secure three-dimensional data transmission and display.

An optical three-dimensional (3D) display system interfaced with digital data transmission is proposed. In this system, an original 3D object is encrypted by use of a random phase mask and then the encrypted pattern is recorded as a digital hologram. The digital hologram key is also recorded for optical decryption. Both the encrypted digital hologram and the digital hologram key are transmitted to a receiver through a conventional communication data channel. At the receiver, the 3D scene is reconstructed and displayed optically in a retrieval system based on a joint-transform correlation. Experimental results are presented. We investigate the influence of quantization of the joint power spectrum in the optical correlator on the quality of the reconstructed image.

Algorithms↗