Search PubMed⌕ Search

Biomedical subjects

B W Matthews

Publications and source records attributed to B W Matthews.

At least 127 records · Page 7Linked to original sources
PubMed1992

Structure of a stabilizing disulfide bridge mutant that closes the active-site cleft of T4 lysozyme.

The engineered disulfide bridge between residues 21 and 142 of phage T4 lysozyme spans the active-site cleft and can be used as a switch to control the activity of the enzyme (Matsumura, M. & Matthews, B.W., 1989, Science 243, 792-794). In the oxidized form the disulfide increases the melting temperature of the protein by 11 degrees C at pH 2. The crystal structure of this mutant lysozyme has been determined in both the reduced and oxidized forms. In the reduced form, the crystal structure of the mutant is shown to be extremely similar to that of wild type. In the oxidized form, however, the formation of the disulfide bridge causes the alpha-carbons of Cys 21 and Cys 142, on opposite sides of the active-site cleft, to move toward each other by 2.5 A. In association with this movement, the amino-terminal domain of the protein undergoes a rigid-body rotation of 5.1 degrees relative to the carboxy-terminal domain. This rotation occurs about an axis passing through the junction of the amino-terminal and carboxy-terminal domains and is also close to the axis that best fits the apparent thermal motion of the amino-terminal domain seen previously in crystals of wild-type lysozyme. Even though the engineered Cys 21-Cys 142 disulfide links together the amino-terminal and carboxy-terminal domains of T4 lysozyme, it does not reduce the apparent mobility of the one domain relative to the other. The pronounced "hinge-bending" mobility of the amino-terminal domain that is suggested by the crystallographic thermal parameters of wild-type lysozyme persists in the oxidized (and reduced) mutant structures. In the immediate vicinity of the introduced disulfide bridge the mutant structure is more mobile (or disordered) than wild type, so much so that the exact conformation of Cys 21 remains obscure. As with the previously described disulfide bridge between residues 9 and 164 of T4 lysozyme (Pjura, P.E., Matsumura, M., Wozniak, J.A., & Matthews, B.W., 1990, Biochemistry 29, 2592-2598), the engineered cross-link substantially enhances the stability of the protein without making the folded structure more rigid.

Bacteriophage T4↗
PubMed1992

Multiple alanine replacements within alpha-helix 126-134 of T4 lysozyme have independent, additive effects on both structure and stability.

In a systematic attempt to identify residues important in the folding and stability of T4 lysozyme, five amino acids within alpha-helix 126-134 were substituted by alanine, either singly or in selected combinations. Together with three alanines already present in the wild-type structure this provided a set of mutant proteins with up to eight alanines in sequence. All the variants behaved normally, suggesting that the majority of residues in the alpha-helix are nonessential for the folding of T4 lysozyme. Of the five individual alanine substitutions it is inferred that four result in slightly increased protein stability and one, the replacement of a buried leucine with alanine, substantially decreased stability. The results support the idea that alanine is a residue of high helix propensity. The change in protein stability observed for each of the multiple mutants is approximately equal to the sum of the energies associated with each of the constituent substitutions. All of the variants could be crystallized isomorphously with wild-type lysozyme, and, with one trivial exception, their structures were determined at high resolution. Substitution of the largely solvent-exposed residues Asp 127, Glu 128, and Val 131 with alanine caused essentially no change in structure except at the immediate site of replacement. Substitutions of the partially buried Asn 132 and the buried Leu 133 with alanine were associated with modest (< or = 0.4 A) structural adjustments. The structural changes seen in the multiple mutants were essentially a combination of those seen in the constituent single replacements. The different replacements therefore act essentially independently not only so far as changes in energy are concerned but also in their effect on structure. The destabilizing replacement Leu 133-->Ala made alpha-helix 126-134 somewhat less regular. Incorporation of additional alanine replacements tended to make the helix more uniform. For the penta-alanine variant a distinct change occurred in a crystal-packing contact, and the "hinge-bending angle" between the amino- and carboxy-terminal domains changed by 3.6 degrees. This tends to confirm that such hinge-bending in T4 lysozyme is a low-energy conformational change.

Alanine↗
PubMed1992

Dissection of protein structure and folding by directed mutagenesis.

The lysozyme from bacteriophage T4 is being used as a model system to determine the roles of individual amino acids in the folding and stability of a typical globular protein. One general finding is that the protein is very adaptable, being able to accommodate many potentially destabilizing replacements. In order to determine the importance of 'alpha-helix propensity' in protein stability, different replacements have been made within alpha-helical segments of T4 lysozyme. Several such substitutions of the form Xaa-->Ala increase the stability of the protein, supporting the idea that alanine is a strongly helix-favouring amino acid. It is possible to engineer a protein that has up to ten alanines in succession, yet still folds and has normal activity. This illustrates the redundancy that is present in the amino acid sequence. A number of 'cavity-creating' mutants of the form Leu-->Ala have been constructed to understand better the nature of hydrophobic stabilization. The structural consequences of these mutations differ from site to site. In some cases the protein structure hardly changes at all; in other cases removal of the wild-type side-chain allows surrounding atoms to move in and occupy the vacated space, although a cavity always remains. The destabilization of the protein associated with these cavity-creating mutations also varies from case to case. The results suggest how to reconcile recent conflicting reports concerning the strength of the hydrophobic effect in proteins.

Bacteriophage T4↗
PubMed1992

Structural basis for the action of thermolysin.

High resolution X-ray crystallography has been used to determine the modes of binding to thermolysin of a series of different inhibitors including dipeptides, mercaptans, hydroxamates, N-carboxymethyl peptides and phosphonamidates. The interactions displayed by such inhibitors illustrate interactions that are presumed to occur between the enzyme and its substrates during catalysis. The crystallographic analysis, together with model building, suggest a detailed stereochemical mechanism of action for thermolysin and, by analogy, other zinc proteases such as carboxypeptidase A and the angiotensin converting enzyme. Analysis of a series of phosphonamidates, which are presumed to be transition-state analogues, has shown that chemically similar inhibitors can adopt dissimilar modes of binding. These different configurations provide a rationalization for large differences in the kinetics of binding that are observed for these inhibitors. Experiments with thermolysin as a test case suggest that knowledge of the three-dimensional structure of an enzyme or receptor will greatly facilitate the rational design of drugs directed at such targets.

Amino Acid Sequence↗
PubMed1991

Structural and thermodynamic consequences of burying a charged residue within the hydrophobic core of T4 lysozyme.

To determine the energetic and structural consequences of placing a charged group within the core of a protein, two "buried charge" mutants, Met 102----Lys (M102K) and Leu 133----Asp (L133D) were constructed in phage T4 lysozyme. Both proteins fold at neutral pH, although they are substantially less stable than wild type. The activity of M102K is about 35% that of wild type, while that of L133D is about 4%. M102K could be crystallized, and its structure was determined at high resolution. The crystal structure (at pH 6.8) of the mutant is very similar to that of wild type except for the alpha-helix that includes residues 108-113. In wild-type lysozyme, one side of this helix is exposed to solvent and the other contacts Met 102. In the M102K structure this alpha-helix becomes much more mobile, possibly allowing partial access of Lys 102 to solvent. The stability of M102K, determined by monitoring the unfolding of the protein with CD, is pH-dependent, consistent with the charged form of the substituted amino acid being more destabilizing than the uncharged form. The pKa of Lys 102 was estimated to be 6.5 both by differential titration and also by NMR analysis of isotopically labeled protein with 13C incorporated at the C epsilon position of all lysines. As the pH is lowered below pH 6.5, the overall three-dimensional structure of M102K at room temperature appears to be maintained to pH 3 or so, although there is evidence for some structural adjustment possibly allowing solvent accessibility to the protonated form of Lys 102.

Amino Acid Sequence↗
PubMed1991

Analysis of the interaction between charged side chains and the alpha-helix dipole using designed thermostable mutants of phage T4 lysozyme.

It was shown previously that the introduction of a negatively charged amino acid at the N-terminus of an alpha-helix could increase the thermostability of phage T4 lysozyme via an electrostatic interaction with the "helix dipole" [Nicholson, H., Becktel, W. J., & Matthews, B. W. (1988) Nature 336, 651-656]. The prior report focused on the two stabilizing substitutions Ser 38----Asp (S38D) and Asn 144----Asp (N144D). Two additional examples of stabilizing mutants, T109D and N116D, are presented here. Both show the pH-dependent increase in thermal stability expected for the interaction of an aspartic acid with an alpha-helix dipole. Control mutants were also constructed to further characterize the nature of the interaction with the alpha-helix dipole. High-resolution crystal structure analysis was used to determine the nature of the interaction of the substituted amino acids with the end of the alpha-helix in both the primary and the control mutants. Control mutant S38N has stability essentially the same as that of wild-type lysozyme but hydrogen bonding similar to that of the stabilizing mutant S38D. This confirms that it is the electrostatic interaction between Asp 38 and the helix dipole, rather than a change in hydrogen-bonding geometry, that gives enhanced stability. Structural and thermodynamic analysis of mutant T109N provide a similar control for the stabilizing replacement T109D. In the case of mutant N116D, there was concern that the enhanced stability might be due to a favorable salt-bridge interaction between the introduced aspartate and Arg 119, rather than an interaction with the alpha-helix dipole. The additivity of the stabilities of N116D and R119M seen in the double mutant N116D/R119M indicates that favorable interactions are largely independent of residue 119. As a further control, Asp 92, a presumed helix-stabilizing residue in wild-type lysozyme, was replaced with Asn. This decreased the stability of the protein in the manner expected for the loss of a favorable helix dipole interaction. In total, five mutations have been identified that increase the thermostability of T4 lysozyme and appear to do so by favorable interactions with alpha-helix dipoles. As measured by the pH dependence of stability, the strength of the electrostatic interaction between the charged groups studied here and the helix dipole ranges from 0.6 to 1.3 kcal/mol in 150 mM KCl. In the case of mutants S38D and N144H, NMR titration was used to measure the pKa's of Asp 38 and His 144 in the folded structures.(ABSTRACT TRUNCATED AT 400 WORDS)

Amino Acid Sequence↗
PubMed1991

Cumulative site-directed charge-change replacements in bacteriophage T4 lysozyme suggest that long-range electrostatic interactions contribute little to protein stability.

Bacteriophage T4 lysozyme is a basic molecule with an isoelectric point above 9.0, and an excess of nine positive charges at neutral pH. It might be expected that it would be energetically costly to bring these out-of-balance charges from the extended, unfolded, form of the protein into the compact folded state. To determine the contribution of such long-range electrostatic interactions to the stability of the protein, five positively charged surface residues, Lys16, Arg119, Lys135, Lys147 and Arg154, were individually replaced with glutamic acid. Eight selected double, triple and quadruple mutants were also constructed so as to sequentially reduce the out-of-balance formal charge on the molecule from +9 to +1 units. Each of the five single variant proteins was crystallized and high-resolution X-ray analysis confirmed that each mutant structure was, in general, very similar to the wild-type. In the case of R154E, however, the Arg154 to Glu replacement caused a rearrangement in which Asp127 replaced Glu128 as the capping residue of a nearby alpha-helix. The thermal stabilities of all 13 variant proteins were found to be fairly similar, ranging from 0.5 kcal/mol more stable than wild-type to 1.7 kcal/mol less stable than wild-type. In the case of the five single charge-change variants, for which the structures were determined, the changes in stability can be rationalized in terms of changes in local interactions at the site of the replacement. There is no evidence that the reduction in the out-of-balance charge on the molecule increases the stability of the folded relative to the unfolded form, either at pH 2.8 or at pH 5.3. This indicates that long-range electrostatic interactions between the substituted amino acid residues and other charged groups on the surface of the molecule are weak or non-existent. Furthermore, the relative stabilities of the multiple charge replacement mutant proteins were found to be almost exactly equal to the sums of the relative stabilities of the constituent single mutant proteins. This also clearly indicates that the electrostatic interactions between the replaced charges are negligibly small. The activities of the charge-change mutant lysozymes, as measured by the rate of hydrolysis of cell wall suspensions, are essentially equal to that of the wild-type lysozyme, but on a lysoplate assay the mutant enzymes appear to have higher activity.(ABSTRACT TRUNCATED AT 400 WORDS)

Arginine↗
PubMed1991

Structural and thermodynamic analysis of the packing of two alpha-helices in bacteriophage T4 lysozyme.

Packing interactions in bacteriophage T4 lysozyme were explored by determining the structural and thermodynamic effects of substitutions for Ala98 and neighboring residues. Ala98 is buried in the core of T4 lysozyme in the interface between two alpha-helices. The Ala98 to Val (A98V) replacement is a temperature-sensitive lesion that lowers the denaturation temperature of the protein by 15 degrees C (pH 3.0, delta delta G = -4.9 kcal/mol) and causes atoms within the two helices to move apart by up to 0.7 A. Additional structural shifts also occur throughout the C-terminal domain. In an attempt to compensate for the A98V replacement, substitutions were made for Val149 and Thr152, which make contact with residue 98. Site-directed mutagenesis was used to construct the multiple mutants A98V/T152S, A98V/V149C/T152S and the control mutants T152S, V149C and A98V/V149I/T152S. These proteins were crystallized, and their high-resolution X-ray crystal structures were determined. None of the second-site substitutions completely alleviates the destabilization or the structural changes caused by A98V. The changes in stability caused by the different mutations are not additive, reflecting both direct interactions between the sites and structural differences among the mutants. As an example, when Thr152 in wild-type lysozyme is replaced with serine, the protein is destabilized by 2.6 kcal/mol. Except for a small movement of Val94 toward the cavity created by removal of the methyl group, the structure of the T152S mutant is very similar to wild-type T4 lysozyme. In contrast, the same Thr152 to Ser replacement in the A98V background causes almost no change in stability. Although the structure of A98V/T152S remains similar to A98V, the combination of T152S with A98V allows relaxation of some of the strain introduced by the Ala98 to Val replacement. These studies show that removal of methyl groups by mutation can be stabilizing (Val98----Ala), neutral (Thr152----Ser in A98V) or destabilizing (Val149----Cys, Thr152----Ser). Such diverse thermodynamic effects are not accounted for by changes in buried surface area or free energies of transfer of wild-type and mutant side-chains. In general, the changes in protein stability caused by a mutation depend not only on changes in the free energy of transfer associated with the substitution, but also on the structural context within which the mutation occurs and on the ability of the surrounding structure to relax in response to the substitution.(ABSTRACT TRUNCATED AT 400 WORDS)

Amino Acids↗
PubMed1991

Contributions of engineered surface salt bridges to the stability of T4 lysozyme determined by directed mutagenesis.

Six designed mutants of T4 lysozyme were created in an attempt to create putative salt bridges on the surface of the protein. The first three of the mutants, T115E (Thr 115 to Glu), Q123E, and N144E, were designed to introduce a new charged side chain close to one or more existing charged groups of the opposite sign on the surface of the protein. In each of these cases the putative electrostatic interactions introduced by the mutation include possible salt bridges between residues within consecutive turns of an alpha-helix. Effects of the mutations ranged from no change in stability to a 1.5 degrees C (0.5 kcal/mol) increase in melting temperature. In two cases, secondary (double) mutants were constructed as controls in which the charge partner was removed from the primary mutant structure. These controls proteins indicate that the contributions to stability from each of the engineered salt bridges is very small (about 0.1-0.25 kcal/mol in 0.15 M KCl). The structures of the three primary mutants were determined by X-ray crystallography and shown to be essentially the same as the wild-type structure except at the site of the mutation. Although the introduced charges in the T115E and Q123E structures are within 3-5 A of their intended partner, the introduced side chains and their intended partners were observed to be quite mobile. It has been shown that the salt bridge between His 31 and Asp 70 in T4 lysozyme stabilizes the protein by 3-5 kcal/mol [Anderson, D. E., Becktel, W. J., & Dahlquist, F. W. (1990) Biochemistry 29, 2403-2408]. To test the effectiveness of His...Asp interactions in general, three additional double mutants, K60H/L13D, K83H/A112D, and S90H/Q122D, were created in order to introduce histidine-aspartate charge pairs on the surface of the protein. Each of these mutants destabilizes the protein by 1-3 kcal/mol in 0.15 M KCl at pH values from 2 to 6.5. The X-ray crystallographic structure of the mutant K83H/A112D has been determined and shows that there are backbone conformational changes of 0.3-0.6 A extending over several residues. The introduction of the histidine and aspartate presumably introduces strain into the folded protein that destabilizes this variant. It is concluded that pairs of oppositely charged residues that are on the surface of a protein and have freedom to adopt different conformations do not tend to come together to form structurally localized salt bridges. Rather, such residues tend to remain mobile, interact weakly if at all, and do not contribute significantly to protein stability. It is argued that the entropic cost of localizing a pair of solvent-exposed charged groups on the surface of a protein largely offsets the interaction energy expected from the formation of a defined salt bridge. There are examples of strong salt bridges in proteins, but such interactions require that the folding of the protein provides the requisite driving energy to hold the interacting partners in the correct rigid alignment.

Electrochemistry↗
PubMed1991

Three-dimensional structure of human basic fibroblast growth factor.

The three-dimensional structure of human basic fibroblast growth factor (bFGF) has been determined by x-ray crystallography and refined to a crystallographic residual of 17.4% at 2.2-A resolution. The structure was initially solved at a nominal resolution of 2.8 A by multiple isomorphous replacement using three heavy-atom derivatives. Although the map clearly showed the overall fold of the molecule, electron density was not observed for the first 19 amino-terminal and the last 3 carboxyl-terminal amino acids, suggesting that they are disordered. The bFGF crystals were grown from 2.0 M ammonium sulfate at pH 8.1 in space group P1 with cell dimensions a = 30.9 A, b = 33.4 A, c = 35.9 A, alpha = 59.5 degrees, beta = 72.0 degrees, and gamma = 75.6 degrees. There is one molecule per unit cell and the crystals diffract to spacings beyond 1.9 A. The overall structure of bFGF can be described as a trigonal pyramid with a fold very similar to that reported for interleukin 1 beta, interleukin 1 alpha, and soybean trypsin inhibitor. An apparent sulfate ion is bound within a basic region on the surface of the molecule and has a ligands the main-chain amide of Arg-120 and the side chains of Asn-27, Arg-120, and Lys-125. This is suggested as the presumed binding site for heparin. Residues 106-115, which are presumed to bind to the bFGF receptor [Baird, A., Schubert, D., Ling, N. & Guillemin, R. (1988) Proc. Natl. Acad. Sci. USA 85, 2324-2328], include an irregular loop that extends somewhat from the surface of the protein and is about 25 A from the presumed heparin binding site. The backbone structure of this putative receptor-binding loop is very similar, although not identical, to the corresponding region of interleukin 1 beta.

Amino Acid Sequence↗
PubMed1991

Toward a simplification of the protein folding problem: a stabilizing polyalanine alpha-helix engineered in T4 lysozyme.

In an attempt to simplify the protein folding problem, and also to further investigate the role of alanine as a helix-stabilizing residue, a series of alanines was introduced within the alpha-helix that includes residues 126-134 of T4 lysozyme. In wild-type lysozyme this alpha-helix contains alanine residues at positions 129, 130, and 134. Mutant lysozymes with alanines substituted at positions 128, 131, 132, and 133, either as single substitutions or in selected combinations, were constructed by oligonucleotide-directed mutagenesis. With the exception of the replacement of Leu 133, which is buried within the hydrophobic core of the protein, all the variants were more stable than wild-type lysozyme. The variant with alanines substituted at positions 128, 131, and 132 (E128A/V131A/N132A), which incorporates the sequence Ala 128-Ala 129-Ala 130-Ala 131-Ala 132-Leu 133-Ala 134, has a melting temperature 3.3 degrees C above that of wild-type lysozyme. Determination of the crystal structure of this mutant lysozyme shows that the replacement of Glu 128, Val 131, and Asn 132 with alanine causes alpha-helix 126-134 to rotate 3.4 degrees about an axis parallel to its own axis. This rotation seems to be triggered primarily by the loss of a hydrogen bond between Asn 132 and Ser 117 and is associated with the repacking of several side chains at the interface between alpha-helix 126-134 and the adjacent alpha-helix 115-122.(ABSTRACT TRUNCATED AT 250 WORDS)

Alanine↗
PubMed1991

Second-site revertants of an inactive T4 lysozyme mutant restore activity by restructuring the active site cleft.

Substitution of Thr26 by Gln in the lysozyme of bacteriophage T4 produces an enzyme with greatly reduced activity but essentially unaltered stability relative to wild type. Spontaneous second-site revertants of the mutant were selected genetically; two of them were chosen for structural and biochemical characterization. One revertant bears (in addition to the primary mutation) the substitution Tyr18----His, the other, Tyr18----Asp. The primary mutant and both revertant lysozyme genes were reconstructed in a plasmid-based expression system, and the proteins were produced and purified. The two revertant lysozymes exhibit enzymatic activities intermediate between wild type and the primary mutant; both also exhibit melting temperatures approximately 3 degrees C lower than either the wild type or the primary mutant. Crystals suitable for X-ray diffraction analysis were obtained from both revertant lysozymes, but not the primary mutant. Structures of the double mutant lysozymes were refined at 1.8-A resolution to crystallographic residuals of 15.1% (Tyr18----His) and 15.2% (Tyr18----Asp). Model building suggests that the side chain of Gln26 in the primary mutant is forced to protrude into the active site cleft, resulting in low catalytic activity. In contrast, the crystal structures of the revertants reveal that the double substitutions (Gln26 and His18, or Gln26 and Asp18) fit into the same space that is occupied by Thr26 and Tyr18 in the wild-type enzyme; the effect is a restructuring of the surface of the active site cleft, with essentially no perturbation of the polypeptide backbone. This restructuring is effected by a novel series of hydrogen bonds and electrostatic interactions that apparently stabilize the revertant structures.

Base Sequence↗
PubMed1991

Structural and genetic analysis of electrostatic and other interactions in bacteriophage T4 lysozyme.

The lysozyme from bacteriophage T4 is being used as a model system to determine the roles of individual amino acids in the folding and stability of a typical globular protein. Such studies can provide quantitative information on the contributions made by different types of interactions including hydrogen bonds, hydrophobic interactions, salt bridges and disulphide bridges. To determine the contribution of long-range electrostatic interactions a combination of charge-change mutations was used to reduce the overall formal charge on T4 lysozyme at neutral pH from +9 to +1 units. Such changes in charge were found to have little effect on the stability of the molecule. Salt bridges engineered on the surface of the protein also were found to contribute little to stability. In contrast, the introduction of acidic groups designed to interact with the partial positive charges at the N-termini of alpha-helices consistently increased the stability of the protein. It is argued that this difference between electrostatic salt-bridge interactions and electrostatic 'helix-dipole' interactions lies in the entropic cost of bringing together the interacting partners. In an attempt to simplify the folding problem, and also to further investigate the helix propensity of different amino acids, a series of alanines was introduced within an alpha-helix of T4 lysozyme. The resultant protein not only folds normally but is also more stable than the wild-type enzyme, adding further support to recent evidence that alanine is a helix-favouring amino acid.

Electricity↗
PubMed1991

Comparison of the crystal structure of bacteriophage T4 lysozyme at low, medium, and high ionic strengths.

Crystals of bacteriophage T4 lysozyme used for structural studies are routinely grown from concentrated phosphate solutions. It has been found that crystals in the same space group can also be grown from solutions containing 0.05 M imidazole chloride, 0.4 M sodium choride, and 30% polyethylene glycol 3500. These crystals, in addition, can also be equilibrated with a similar mother liquor in which the sodium chloride concentration is reduced to 0.025 M. The availability of these three crystal variants has permitted the structure of T4 lysozyme to be compared at low, medium, and high ionic strength. At the same time the X-ray structure of phage T4 lysozyme crystallized from phosphate solutions has been further refined against a new and improved X-ray diffraction data set. The structures of T4 lysozyme in the crystals grown with polyethylene glycol as a precipitant, regardless of the sodium chloride concentration, were very similar to the structure in crystals grown from concentrated phosphate solutions. The main differences are related to the formation of mixed disulfides between cysteine residues 54 and 97 and 2-mercaptoethanol, rather than to the differences in the salt concentration in the crystal mother liquor. Formation of the mixed disulfide at residue 54 resulted in the displacement of Arg-52 and the disruption of the salt bridge between this residue and Glu-62. Other than this change, no obvious alterations in existing salt bridges in T4 lysozyme were observed. Neither did the reduction in the ionic strength of the mother liquor result in the formation of new salt bridge interactions. These results are consistent with the ideas that a crystal structure determined at high salt concentrations is a good representation of the structure at lower ionic strengths, and that models of electrostatic interactions in proteins that are based on crystal structures determined at high salt concentrations are likely to be relevant at physiological ionic strengths.

Crystallization↗
PubMed1991

Structure of gamma-chymotrypsin in the range pH 2.0 to pH 10.5 suggests that gamma-chymotrypsin is a covalent acyl-enzyme adduct at low pH.

Crystals of gamma-chymotrypsin (gamma-CHT) grown at pH 7.0 are stable from pH 2.0 to 11.0. Crystalline gamma-CHT therefore provides an unusually favourable system to observe the structure of a protein and its bound solvent over a broad range of pH. In this report we describe the high-resolution refined structure of gamma-CHT at pH values of 2.0, 7.0 and 10.5. The apparent tetrapeptide seen bound in the active site of gamma-CHT at pH 7.0 is also present at pH 2.0 and 10.5 although it is better defined at low pH. A comparison of the respective structures shows that there is additional electron density in the low pH structure at the point where the side-chain of Ser 195 approaches most closely to the presumptive inhibitor. This suggests that the adduct is most likely to be covalently linked to the enzyme at low pH and to be non-covalent at higher pH. As the pH is lowered from 7.0 to 2.0, the side-chain of His 40 rotates approximately 120 degrees about its C alpha-C beta bond and, in concert, the side-chain of Gln 34 also rotates approximately 140 degrees about its C alpha-C beta bond. Apart from these localized rearrangements in the vicinity of His 40, the structure of gamma-CHT at pH 2.0 is very similar to that at neutral pH. The structure of gamma-CHT at pH 10.5 is also seen to be almost identical with that at neutral pH. There is no indication that the internal salt bridge between Asp 194 and the alpha-amino group of lle 16 begins to dissociate at pH 10.5. With the exception of the vicinity of His 40, the structure of the bound solvent in the crystal structures at low, neutral and high pH is very similar.(ABSTRACT TRUNCATED AT 250 WORDS)

Chymotrypsin↗
PubMed1990

A mutant T4 lysozyme displays five different crystal conformations.

Phage T4 lysozyme consists of two domains between which is formed the active-site cleft of the enzyme. The crystallographically determined thermal displacement parameters for the protein suggested that the amino terminal of the two domains undergoes 'hinge-bending' motion about an axis passing through the waist of the molecule. Such conformational mobility may be important in allowing access of substrates to the active site of the enzyme. We report here a crystallographic study of a mutant T4 lysozyme which demonstrates further the conformational flexibility of the protein. A mutant form of the enzyme with a methionine residue (Met 6) replaced by isoleucine crystallizes with four independent molecules in the crystal lattice. These four molecules have distinctly different conformations. The mutant protein can also crystallize in standard form with a structure very similar to the wild-type protein. Thus the mutant protein can adopt five different crystal conformations. The isoleucine for methionine substitution at the intersection of the two domains of T4 lysozyme apparently enhances the hinge-bending motion presumed to occur in the wild-type protein, without significantly affecting the catalytic activity or thermal stability of the protein.

Binding Sites↗
PubMed1990

Ancestral lysozymes reconstructed, neutrality tested, and thermostability linked to hydrocarbon packing.

The controversy surrounding the idea that neutral mutations dominate protein evolution is attributable in part to the inadequacy of the tools available to evolutionary investigators. With a few exceptions, most investigations into the force driving protein evolution have relied on indirect criteria for distinguishing neutral and non-neutral variants. To investigate a particular pathway of molecular evolution, we have reconstructed by site-directed mutagenesis likely ancestral variants of the lysozymes of modern game birds (order Galliformes), tested their activity and thermostability and determined their three-dimensional structure. We focused on amino acids at three positions that are occupied in all known game birds either by the triplet Thr 40, Ile 55, Ser 91, or by the triplet Ser 40, Val 55, Thr 91. We have synthesized proteins representing intermediates along the possible three-step evolutionary pathways between these triplets. Although all of these are active and stable, none of these intermediates is found in known lysozymes. A comparison of the structures and thermostabilities of the variants reveals a linear correlation between the side-chain volume of the triplet and the thermostability of the protein. Each pathway connecting the two extant triplet sequences includes a variant with a thermostability outside the range of the extant proteins. This observation is consistent with a non-neutral evolutionary pathway. The existence of variants that are more stable than the extant proteins suggests that selection for maximum thermostability may not have been an important factor in the evolution of this enzyme.

Amino Acid Sequence↗