Search PubMed⌕ Search

Biomedical subjects

B L V Prasad

Publications and source records attributed to B L V Prasad.

7 recordsLinked to original sources
PubMed2005

Cobalt and magnesium ferrite nanoparticles: preparation using liquid foams as templates and their magnetic characteristics.

An easy and convenient method for the synthesis of cobalt and magnesium ferrite nanoparticles is demonstrated using liquid foams as templates. The foam is formed from an aqueous mixture of an anionic surfactant and the desired metal ions, where the metal ions are electrostatically entrapped by the surfactant at the thin borders between the foam bubbles and their junctions. The hydrolysis is carried out using alkali resulting in the formation of desired nanoparticles, with the foam playing the role of a template. However, in the formation of ferrites with the formula MFe(2)O(4), where the metal ion and iron possess oxidation states of +2 and +3, respectively, forming a foam from a 1:2 mixture of the desired ionic solutions would lead to a foam composition at variance with the original solution mixture because of greater electrostatic binding of ions possessing a greater charge with the surfactant. In our procedure, we circumvent this problem by preparing the foam from a 1:2 mixture of M(2+) and Fe(2+) ions and then utilizing the in situ conversion of Fe(2+) to Fe(3+) under basic conditions inside the foam matrix to get the desired composition of the metal ions with the required oxidation states. The fact that we could prepare both CoFe(2)O(4) and MgFe(2)O(4) particles shows the vast scope of this method for making even multicomponent oxides. The magnetic nanoparticles thus obtained exhibit a good crystalline nature and are characterized by superparamagnetic properties. The magnetic features observed for CoFe(2)O(4) and MgFe(2)O(4) nanoparticles are well in accordance with the expected behaviors, with CoFe(2)O(4) particles showing higher blocking temperatures and larger coercivities. These features can easily be explained by the contribution of Co(2+) sites to the magnetocrystalline anisotropy and the absence of the same from the Mg(2+) ions.

Journal Article↗
PubMed2005

Reversible transformations of gold nanoparticle morphology.

Herein is reported a metamorphosis taking place in a gold nanosized system. The observed phenomenon of shape and size transformations was found to be completely reversible. Unlike most procedures in the literature where shape and size control occur in the synthetic step by adding growth- and shape-controlling agents such as surfactants or polymers, in this system postsynthetic changes in shape and size can be carried out simply by changing the ratio of reactive, competing reagents, more specifically, alkylthiols versus tetralkylammonium salts. Interestingly, the transfer of gold metal occurs (large prismatic particles to small particles and vice versa) under the influence of reagents that do not cause such interactions with bulk gold. All intermediate steps of the morphology change were observed using HRTEM and electron diffraction. The processes of breaking down and "welding back" solid metal nanoparticles occur under mild conditions and are remarkable examples of the unique chemical properties of nanomaterials. The described process is expected to be relevant to other nanoscale systems where similar structural circumstances could occur.

Letter↗
PubMed2005

Gold nanoparticle networks with photoresponsive interparticle spacings.

Photoresponsive gold nanoparticle networks were prepared by functionalizing them with azobenzene derivatives. A network can be formed when a linker molecule constituting the azobenzene moiety suitably derivatized on either side with gold surface sensitive groups such as thiols and amines is added to the nanoparticle solution. It is shown that the interparticle spacing in the networks could be controlled by the reversible trans-cis isomerization of the azobenzene moiety induced by UV and visible light, respectively. The photoinduced variation in the interparticle spacings is inferred by the changes in the optical spectra of the gold nanoparticles which display a red or blue shift in the surface plasmon resonance peak depending on a decrease or increase in the interparticle spacing, respectively. Transmission electron microscopy images are in consonance with the evidence from the optical spectra.

Azo Compounds↗
PubMed2005

Phase transfer of oleic acid capped Ni(core)Ag(shell) nanoparticles assisted by the flexibility of oleic acid on the surface of silver.

The phase transfer protocols in vogue for the oleic acid capped silver nanoparticles, viz., salt-induced precipitation and redispersion or phosphoric acid-induced method, are examined and compared thoroughly. A comprehensive evaluation with respect to the mechanistic aspects involved is made and the merits and demerits of the different procedures are delineated. It is found that the salt-induced precipitation and redispersion is more versatile in that the precipitate can actually be redispersed in both aqueous and organic media. However, in terms of mechanism both the routes seem to be very similar wherein the orientational change of oleic acid on the silver surface in the two different environments-organic and aqueous-plays a crucial role in the adaptability of the system to the different environments. Subsequently, this change of orientation of oleic acid on silver surface in aqueous and organic media has been utilized to phase transfer Ni-based nanoparticulate systems. The nascent oleic acid-capped Ni nanoparticles, which were synthesized by a foam-based protocol, were dispersible in water but not in nonpolar organic media such as cyclohexane or toluene. Then, just by coating a thin shell of silver on them we could achieve complete phase transfer of the Ni(core)Ag(shell) from aqueous to organic media following similar procedures used for oleic acid-capped silver nanoparticles. Here, the phase transfer seems to be facilitated by the orientational flexibility of oleic acid on the silver surface as opposed to other metal surfaces as evidenced from the infrared and thermogravimetric analyses of oleic acid-capped Ni and Ni(core)Ag(shell) nanoparticles. This orientation-assisted phase transfer method could be generalized and can be adapted to other systems where, if the nascent nanoparticles cannot be phase transferred as is, they can be coated by a silver shell and oleic acid making them suitable for dispersion in both aqueous and organic media.

Journal Article↗
PubMed2005

Solvent-adaptable silver nanoparticles.

A simple and efficient way of obtaining silver nanoparticles that are dispersible both in organic and in aqueous solvents using a single capping agent is described. The silver nanoparticles are initially prepared in water in the presence of aerosol OT [sodium bis(2-ethylhexyl)-sulfosuccinate, AOT]. Thereafter, transfer of the AOT-capped silver nanoparticles to an organic phase is induced by the addition of a small amount of orthophosphoric acid during shaking of the biphasic mixture. The AOT-stabilized silver nanoparticles could be separated out from the organic phase in the form of a powder. The hydrophobic nanoparticles thus prepared are stable and are readily resuspended in a variety of other polar (including water) and nonpolar solvents without further surface treatment. The amphiphatic nature of the silver surface is brought about by a small orientational change in the AOT monolayer on the silver surface in response to the polarity of the solvent.

Journal Article↗
PubMed2004

Liquid foam as a template for the synthesis of iron oxyhydroxide nanoparticles.

Liquid foams have been used as a template to prepare iron oxyhydroxide nanoparticles. This is achieved by a process of electrostatic entrapment of Fe2+/Fe3+ ions in the foam stabilized by the surfactant sodium dodecyl sulfate followed by the in situ hydrolysis of the metal ions. Infrared and selected area electron diffraction measurements suggest the formation of a mixture of beta-FeO(OH) and gamma-FeO(OH) crystallographic phases after the in situ hydrolysis of the metal ions in the foam template. Transmission electron microscopy analysis of the powders obtained from the foam indicates that the particles are fairly monodisperse with an average size of around 50 nm. Scanning electron microscopy pictures reveal that the particles form loosely bound aggregates of around 300 nm. After the powders obtained in the foam are annealed at 400 degrees C, X-ray diffraction measurements show that the FeO(OH) particles are converted to alpha-Fe2O3. The mechanistic aspects of metal ion hydrolysis in a foam are discussed, and some of the advantages of this method vis-à-vis the normal solution-based methods are outlined.

Journal Article↗