Search PubMed⌕ Search

Biomedical subjects

Anumita Paul

Publications and source records attributed to Anumita Paul.

9 recordsLinked to original sources
PubMed2006

Electrochemical actuation of growing copper dendrimers in water.

We report the observation of electrochemical actuation in growing dendritic fibers made of self-assembled copper nanostructures (of 100 nm or less in diameter), on the metallic cathode of an ordinary aqueous electrochemical cell. This could be achieved when a copper anode and another metal cathode is placed in aqueous solution of either dilute HCl or CuSO(4), or CuCl(2), or H(2)O, and upon application of a DC voltage in the range of 1.5-12.0 V. The actuation could be observed with an on-off cycle of the applied voltage in the above range. The phenomenon was also observed with the growth of bimetallic structures using a number of electrolytes such as Ag(NO(3)), Pb(NO(3))(2), CoCl(2), NiCl(2), CdCl(2), ZnCl(2), and HAuCl(4). The fibrous structures remained stretched as they grew longer with time in the presence of an applied voltage. The extent of actuation was dependent on the applied voltage, the concentration of Cu(2+) ions in the solution, and also on ions such as Na(+), which did not get deposited at the cathode. The observed phenomena under different conditions have been explained on the basis of electrocapillarity.

Journal Article↗
PubMed2006

Green fluorescent protein-expressing Escherichia coli as a model system for investigating the antimicrobial activities of silver nanoparticles.

Recombinant Escherichia coli (E. coli) bacteria expressing green fluorescent protein (GFP) was used as a model system to investigate the antimicrobial activities of Ag nanoparticles (NPs). A convenient in situ method of Ag NP synthesis using sodium borohydride, in the bacterial growth medium, was developed to produce preformed NPs for the study. Fluorescence spectroscopic and microscopic techniques allowed rapid detection of time-dependent changes in bacterial growth as well as fluorescence characteristics in the presence of Ag NPs. In addition, X-ray diffraction, UV-vis spectroscopic, and transmission electron microscopic measurements were carried out to understand the effect of Ag NPs on the bacteria. Our observations indicated that Ag NPs, above a certain concentration, not only were bactericidal but also were found to reduce the sizes of treated bacteria in comparison to untreated ones. Cell lysis of Ag NP-treated bacteria was suggested by the increased GFP fluorescence obtained in the medium. In vitro DNA-Ag NP interaction was detected by spectrophotometric analysis. However, electrophoresis studies indicated no direct effect of Ag NPs on DNA or protein profiles.

Anti-Bacterial Agents↗
PubMed2006

Lithography for imprinting colored patterns with quantum dots.

In this article, we report a new form of lithography that involves a reaction between a gas and an ion embedded in a polymer film. The principle is based on a combination of top-down and bottom-up approaches in which a transmission electron microscope grid is placed on a poly(vinylpyrrolidone) film containing Cd2+ ions, which is then exposed to H2S gas. This leads to the generation of a fluorescent yellow pattern due to the formation of CdS nanoparticles on exposed parts of the film. Also, we have used the same method to generate patterns in two colors by starting with a green fluorescent dye incorporated into the film and following the same procedure in which patterned yellow-orange CdS nanoaparticles are distributed over the background fluorescence of the dye. We have used fluorescence microscopy, UV-vis and fluorescence spectroscopy, transmission electron microscopy, atomic force microscopy, and X-ray diffraction methods for the characterization of the products and patterns. This method could possibly be a fairly general method of generating patterned materials on 2D and 3D substrates.

Journal Article↗
PubMed2005

Observations of the effect of anionic, cationic, neutral, and zwitterionic surfactants on the Belousov-Zhabotinsky reaction.

In this paper we report the experimental observations of the effects of various surfactants on the oscillations of the ferroin-catalyzed Belousov-Zhabotinsky (BZ) reaction. The oscillations are followed by observing the change in absorbance at 510 nm due to ferroin in a well-stirred closed BZ reacting system. We have used sodium dodecyl sulfate (SDS) as the anionic surfactant, cetyl trimethylammonium bromide (CTAB) as the cationic surfactant, Triton X-100 as the neutral surfactant, and 3-[(3-cholamidopropyl)dimethylammonio)]-1-propanesulfonate (CHAPS) as the zwitterionic surfactant. In general, we observed that there is a change in the oscillation behavior in the presence of each of these surfactants above their critical micellar concentrations. For different surfactants, the time-dependent evolution of the oscillations is found to be characteristic of the surfactant. The results of our study suggest that the evolution of oscillations is most regular in the presence of micelles of SDS.

Journal Article↗
PubMed2005

Photocatalytic polypyrrole-TiO2-nanoparticles composite thin film generated at the air-water interface.

Herein, we report a new method of generation of TiO(2) nanoparticles (NPs) incorporated thin films of polypyrrole (PPy) at the air-water interface. Aqueous TiO(2) NPs when treated with H(2)O(2) and left in a chamber of pyrrole vapor resulted in the formation of a film at the interface, in addition to bulk precipitate. Spectroscopic, X-ray diffraction, and electron microscopic measurements establish the formation of a thin film of PPy with the incorporation of TiO(2) NPs. The TiO(2)-containing PPy films when transferred onto glass substrates were able to photo catalyze the decomposition of aqueous organic dyes: methyl orange and methylene blue. Further, these films could also photo catalyze the oxidation of iodide to triiodide ions in aqueous potassium iodide solution. We find that the PPy-TiO(2) composite films catalyze the reactions in the presence of light more efficiently than a suspension of TiO(2) NPs.

Journal Article↗
PubMed2005

Au nanoparticles and polyaniline coated resin beads for simultaneous catalytic oxidation of glucose and colorimetric detection of the product.

In this letter, we report the synthesis of Au nanoparticles (NPs) and polyaniline (PANI) on the same cation-exchange resin beads and demonstrate their use in catalyzing the oxidation of glucose to gluconic acid by Au NPs and simultaneously in detecting the formation of the acid by the color change of PANI. The synthesis was carried out by exchanging the cations of the resins with HAuCl4 and anilinuium chloride and then reducing the metal ions by NaBH4 to produce Au NPs followed by polymerization of aniline using H2O2. The green emeraldine salt form of PANI thus obtained was treated with NaOH to be converted to blue emeraldine base before use. The deposition of Au NPs was confirmed by a change in color of the bead, visible spectroscopy, X-ray diffraction, and scanning electron microscopic measurements. On the other hand, the presence of PANI was confirmed by Fourier transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectroscopy. The formation of gluconic acid from glucose was confirmed by FTIR spectroscopy. We could detect the presence of glucose of a minimum 1.0 mM concentration in water, using the present method. Our experimental observations demonstrate the possibility of the incorporation of multifunctional components on the surfaces of resins for carrying out a chemical reaction as well as detection of the product.

Aniline Compounds↗
PubMed2004

Spreading and recoil of a surfactant-containing water drop on glass-supported alcohol films.

In this paper we report the experimental observation of spreading and recoil of surfactant-containing water drops on various alcohol films supported on glass slides. The time evolution of spreading and recoil behavior was recorded by placing a web camera above the drop. We observed that the drop spread the fastest on CH3OH, followed by C2H5OH, and the slowest on i-PrOH. On the other hand, the recoil behavior was just the opposite. The drop recoiled the slowest on CH3OH and fastest on i-PrOH, while it recoiled in an intermediate time on C2H5OH. In addition, concentration of surfactant in the drop played a prominent role in the spreading and recoil time of the drop, with higher surfactant concentration making the drop spread and recoil faster. The time evolution of spreading velocity of the drop on different alcohol films at various surfactant concentrations occurred with a Gaussian distribution and the peak velocity was reached earliest on CH3OH followed by C2H5OH, while on i-PrOH it took the longest time. The recoil behavior was similar. The variation of velocity as a function of radius exhibited oscillatory behavior, indicating the existence of an interfacial phenomenon. We also report the observation that spreading of the drop occurred without observable fingering instability. Further, we observed by Fourier transform infrared (FTIR) spectroscopic measurements that the drop had mixed with the alcohol films as it spread. Miscibility of the alcohol in the film with the drop, alcohol evaporation cooling-induced temperature gradient, and Marangoni effect probably play important roles in the spreading and recoil behavior of the drop.

Journal Article↗
PubMed2003

Macroscopic and mesoscopic patterns observed in thin films formed due to polymerization of aniline at the air-water interface.

We report two-dimensional mesoscopic and macroscopic patterns observed in thin films formed due to polymerization of aniline at the air-water interface. The polymerization at the interface was coupled to a reaction in the bulk medium that was either an iron (ferroin)-catalyzed Belousov-Zhabotinsky (BZ) reaction or another reaction condition where the ferroin component of BZ reaction was replaced by FeSO(4) or Mohr's salt [(NH(4))(2)SO(4).FeSO(4).6H(2)O]. Also, a simple mixture of KBrO(3) and KBr in aqueous acidic solution produced patterned polymers at the interface, observed with aniline introduced from both the vapor phase and the bulk phase (by dissolving in H(2)SO(4)). Observation under an optical microscope revealed that the macroscopic patterns consisted of mesoscopic patterns of various geometrical shapes. In one case, regular circular mesoscopic patterned polymer growth was observed when the reaction was carried out in the presence of 2.02 mM sodium dodecyl sulfate. On the other hand, when the film was grown in an ultrasonicator bath there were no observable mesoscopic or macroscopic patterns in the film.

Journal Article↗