Search PubMed⌕ Search

Biomedical subjects

Andrew J P White

Publications and source records attributed to Andrew J P White.

At least 19 recordsLinked to original sources

Syntheses, structures, and anion-binding properties of two novel calix[2]benzo[4]pyrroles.

Calix[2]benzo[4]pyrrole m-6 and p-6, each containing two dipyrromethane moieties and two m-phenylene or p-phenylene units, respectively, were readily synthesised from pyrrole, 1,3- and 1,4-bis(1,1'-dimethylhydroxymethyl)benzene, (m-4 and p-4, respectively) and acetone. Macrocycles m-6 and p-6 were tested as receptors for a selection of anions, such as acetate, dihydrogenphosphate and fluoride. The X-ray structures of m-6 and p-6 and those of the complexes m-6F(-), m-6Cl(-) and m-6CH(3)COO(-) (with an nBu(4)N(+) counterion) were also determined.

Journal Article↗

Synthesis and structures of bimetallic and polymeric zinc coordination compounds supported by salicylaldiminato and anilido-aldimine ligands.

A series of bimetallic zinc complexes bearing salicylaldiminato (1b-3b) or anilido-aldimine (4c-5c) ligand frameworks, in which the metal centres are separated by aliphatic spacer groups containing 3-6 methylene units, were targeted. X-Ray analysis of salicylaldiminato derivative 2b, with a 4 carbon spacer group, revealed a coordination polymer in the solid state where each zinc centre is ligated by two salicylaldiminato ligands. Contrastingly, the structure of the anilido-aldimine complex 4c, with a 3 carbon methylene spacer group, was found to be a discrete bimetallic complex. These differences are attributed to the differing steric protection at the anilido vs phenoxy donors, the latter more readily facilitating bridges between metal centres.

Journal Article↗

Highly convergent three component benzyne coupling: the total synthesis of ent-clavilactone B.

The first total synthesis of (+)-clavilactone B, a potent antifungal agent and novel tyrosine kinase inhibitor, is described. The absolute configuration of clavilactones has been unambiguously established by using Sharpless asymmetric epoxidation to generate the enantiomerically pure substrate. The strategy highlights the use of a powerful and convergent three-component benzyne coupling with a methylallyl Grignard and a chiral epoxy-aldehyde to generate two C-C bonds and install the carbon skeleton of clavilactone. Oxidative lactonization, ten-membered ring construction by ring closing metathesis, and oxidation gave clavilactone B.

Benzene Derivatives↗

Group 4 catalysts for ethene polymerization containing tetradentate salicylaldiminato ligands.

The structural properties of three new classes of titanium and zirconium complex bearing tetradentate salicylaldiminato proligands are elucidated using X-ray diffraction and NMR spectroscopy. On activation with MAO co-catalyst, their behaviour in ethene polymerization depends strongly on the nature of the structure and the substitution pattern. One titanium complex based on a 2-aminobenzylamine (C3-chain) backbone has a trans arrangement of the co-ligand sites and, unsurprisingly, does not polymerize ethene. The 1,8-diaminonaphthalene (C3-chain) backbone gives a rather ring-strained cis complex, but was also unproductive. A range of cis complexes of zirconium with the 2,2'-diaminobibenzyl (C6-chain) backbone give low to moderate productivities of multimodal poly(ethene), while in contrast the structurally analogous titanium compounds provide highly active, single site catalysts. Thermal degradation of these catalysts is slowed significantly by a substitution pattern on the phenolate unit which sterically protects the imine donor unit; a phenomenon which has been previously observed in much lower activity catalysts based on 2,2'-diaminobiphenyl (C4-chain) but which does not improve the stability of the very highly active unbridged systems.

Journal Article↗

Suitanes.

Explore the source record for details and available documents.

Journal Article↗

Studies on the total synthesis of lactonamycin: synthesis of the CDEF ring system.

A concise and efficient synthesis of the tetracyclic CDEF ring system of lactonamycin (1) is described. The key step involved the Lewis acid mediated, intramolecular Friedel-Crafts acylation of carboxylic acid 6 to produce the tetracyclic CDEF core structure of target 1. The synthesis of 6 was carried out using a high-yielding Negishi coupling of benzyl bromide 7 with triflate 8, which was accessible in 11 steps and 31% overall yield on a multigram scale starting from trihydroxy acid 9.

Indoles↗

Study of ligand substituent effects on the rate and stereoselectivity of lactide polymerization using aluminum salen-type initiators.

A series of aluminum salen-type complexes [where salen is N,N'-bis(salicylaldimine)-1,2-ethylenediamine] bearing ligands that differ in their steric and electronic properties have been synthesized and investigated for the polymerization of rac-lactide. X-ray crystal structures on key precatalysts reveal metal coordination geometries intermediate between trigonal bipyramidal and square-based pyramidal. Both the phenoxy substituents and the backbone linker have a significant influence over the polymerization. Electron-withdrawing groups attached to the phenoxy donor generally gave an increased polymerization rate, whereas large ortho substituents generally slowed down the polymerization. The vast majority of the initiators afforded polylactide with an isotactic bias; only one exhibited a bias toward heteroselectivity. Isoselectivity generally increases with increased flexibility of the backbone linker, which is presumed to be better able to accommodate any potential steric clashes between the propagating polymer chain, the inserting monomer unit, and the substituents on the phenoxy donor.

Aluminum↗

Coordination complexes bearing potentially tetradentate phenoxyamine ligands.

A series of metal complexes containing potentially tetradentate phenoxyamine ligands is described. The ligands are found to bind to main-group metals and first-row transition-metal centres with variable denticity depending upon the requirements of the particular metal centre. Bidentate [Al(III)], tridentate [Mg(II), Ca(II), Zn(II)] and tetradentate [K(I), Cr(III), Fe(II), Co(II)] binding modes have been established unambiguously through single-crystal X-ray structure determinations.

Journal Article↗

Cis and trans selective 1,4-addition of a lithium dithioester enolate to 4-O-TBS-2-cyclohexenone.

The 1,4-addition of the lithium enolate of methyldithioacetate (LMDTA) to (+/-)-4-O-TBS-2-cyclohexenone (3) can be varied from being highly 3,4-trans selective to being highly 3,4-cis selective simply by varying the reaction temperature. This stereodivergency allows expedient syntheses of the corresponding trans and cis methyl esters 6t and 6c and derived bicyclic ketolactones 7t and 7c.

Journal Article↗

A simple, short, and flexible synthesis of viridiofungin derivatives.

Described herein is a simple, flexible, and efficient synthesis of the skeleton of the viridiofungins, a family of microbial secondary metabolites. The synthesis utilizes an asymmetric aldol reaction of a chiral oxazolidinone, a diastereoselective alkylation of a chiral 1,3-dioxolan-2-one, and a geometrically selective alkene cross-metathesis reaction as the key C-C bond-forming steps.

Alkylation↗

Synthetic, structural, mechanistic, and computational studies on single-site beta-diketiminate tin(II) initiators for the polymerization of rac-lactide.

A family of tin(II) complexes supported by beta-diketiminate ligands has been investigated as initiators for the polymerization of rac-lactide. Kinetic studies reveal a first-order dependence on [lactide], but with a significant induction period. Linear plots of M(n) versus conversion and [M](o)/[I](o) versus conversion, along with narrow molecular weight distributions (typically 1.07-1.10), are indicative of well-controlled, "living" polymerizations. Less sterically hindered derivatives promote faster propagation than their bulky analogues, in accord with a more accessible active site. Enhanced rates of polymerization are observed for ligands bearing halogenated N-aryl substituents, a consequence of the more Lewis acidic nature of the Sn(II) centers. All of the initiators exhibit a similar bias toward heterotactic polylactide, which is attributed to a chain-end control mechanism influenced predominantly by the presence of the Sn 5s(2) lone pair of electrons rather than the steric or electronic properties of the beta-diketiminate ligand. The tin(II) isopropyl-(S)-lactate complex, ((Me)BDI(DIPP))SnOCH(Me)COO(i)Pr (14), has been synthesized as a model compound for the propagating species by treatment of ((Me)BDI(DIPP))Sn(NMe(2)) with isopropyl-(S)-lactate. An X-ray structure determination showed that the lactate ligand forms a five-membered chelate ring with a weak donor bond from the carbonyl oxygen atom to the tin center. A B3LYP density functional computational study indicates that insertion of the first lactide monomer into the tin(II) alkoxide bond is facile, with the induction period arising from a slower insertion of the second (and possibly third and fourth) monomer units.

Crystallography, X-Ray↗

Redox control within single-site polymerization catalysts.

The activity of a single-site titanium-based lactide polymerization initiator supported by a ferrocenyl-derivatized salen ligand is shown to be modulated by a chemical redox switch; a substantially higher rate of propagation is found for the neutral catalyst compared to its oxidized dicationic ferrocenium counterpart.

Journal Article↗

Porphyrazines as molecular scaffolds: flexible syntheses of novel multimetallic complexes.

Reductive deselenation of selenodiazole-fused porphyrazines, followed by acylation of the resultant labile porphyrazinediamines, was used to prepare macrocycles bearing two Collins ligands, two oxamido residues, or two quinoline-2-carboxamido units. Peripheral coordination of copper(II) to the di-(quinoline-2-carboxamido)-porphyrazine gave a metal-linked face-to-face porphyrazine dimer array. Sequential derivatization of the two amino groups in the porphyrazinediamines was used to prepare mixed peripheral ligand systems including a dimetallic picolinamido-Schiff base porphyrazine. Such systems exhibit strong metal-metal spin coupling and are anticipated to be of value in the synthesis of novel electronic and magnetic materials.

Journal Article↗

New S/O-substituted ferrocenediyl ligands and their metal complexes.

New unsymmetrical S/O 1,1'-disubstituted ferrocenediyl ethers and hydroxides have been synthesised. The coordination chemistry of 1-(methylsulfanyl)-1'-(methoxy)ferrocene has been investigated with palladium(II) and platinum(II) precursors. With palladium(II), a bis-mu-chloro-bridged dimeric complex was obtained with the ligand bound solely through the thioether donor group. With platinum(II), a bis-ligand trans-sulfur ligated complex was obtained and structurally characterised.

Journal Article↗

Imino sulfinamidines: synthesis and coordination chemistry of a novel class of chiral bidentate ligands.

The new imino sulfinamidine ligand PhS(NHt-Bu)=NC(Me)=N(C6H3-2,6-iPr2), LH (11) was synthesized from N-(2,6-diisopropylphenyl)acetamidine (9) and N-tert-butyl phenylsulfinimidoyl chloride (10). Reaction of LH (11) with ZnEt2 or AlMe3 gave the complexes LZnEt (12) and LAlMe2 (13), respectively. The structures of 12 and 13 were determined by X-ray diffraction and were shown to contain L as a kappa2-N1,N5 bidentate ligand in a six-membered chelate. Formation of the magnesium complex (LMgN(TMS)2 x L2Mg) (14) from 11, MgI2, and KN(SiMe3)2 highlighted a secondary coordination mode of L, binding through the sulfinamidine nitrogens in a four-membered chelate.

Catalysis↗