Biomedical subjects

Andreas Engel

Publications and source records attributed to Andreas Engel.

At least 19 recordsLinked to original sources

PubMed2006

Bacterial outer membrane secretin PulD assembles and inserts into the inner membrane in the absence of its pilotin.

Dodecamerization and insertion of the outer membrane secretin PulD is entirely determined by the C-terminal half of the polypeptide (PulD-CS). In the absence of its cognate chaperone PulS, PulD-CS and PulD mislocalize to the inner membrane, from which they are extractable with detergents but not urea. Electron microscopy of PulD-CS purified from the inner membrane revealed apparently normal dodecameric complexes. Electron microscopy of PulD-CS and PulD in inner membrane vesicles revealed inserted secretin complexes. Mislocalization of PulD or PulD-CS to this membrane induces the phage shock response, probably as a result of a decreased membrane electrochemical potential. Production of PulD in the absence of the phage shock response protein PspA and PulS caused a substantial drop in membrane potential and was lethal. Thus, PulD-CS and PulD assemble in the inner membrane if they do not associate with PulS. We propose that PulS prevents premature multimerization of PulD and accompanies it through the periplasm to the outer membrane. PulD is the first bacterial outer membrane protein with demonstrated ability to insert efficiently into the inner membrane.

Bacterial Outer Membrane Proteins↗

PubMed2006

The contrast-imaging function for tilted specimens.

A theoretical description of the contrast-imaging function is derived for tilted specimens that exhibit weak-phase object characteristics. We show that the tilted contrast-imaging function (TCIF) is a linear transformation, which can be approximated by the convolution operation for small tilt angles or for small specimens. This approximation is not valid for electron tomography, where specimen tilts are above 60 degrees and specimen dimensions amount to some 10 microm. The approximation also breaks down for electron crystallography, where atomic resolution is to be achieved. Therefore, we do not make this approximation and propose a generalized algorithm for inverting the TCIF. The implications of our description are discussed in the context of electron tomography, single particle analysis, and electron crystallography, and the improved resolution is quantitatively demonstrated.

Crystallography↗

PubMed2006

Controlled 2D crystallization of membrane proteins using methyl-beta-cyclodextrin.

High-resolution structural data of membrane proteins can be obtained by studying 2D crystals by electron crystallography. Finding the right conditions to produce these crystals is one of the major bottlenecks encountered in 2D crystallography. Many reviews address 2D crystallization techniques in attempts to provide guidelines for crystallographers. Several techniques including new approaches to remove detergent like the biobeads technique and the development of dedicated devices have been described (dialysis and dilution machines). In addition, 2D crystallization at interfaces has been studied, the most prominent method being the 2D crystallization at the lipid monolayer. A new approach based on detergent complexation by cyclodextrins is presented in this paper. To prove the ability of cyclodextrins to remove detergent from ternary mixtures (lipid, detergent and protein) in order to get 2D crystals, this method has been tested with OmpF, a typical beta-barrel protein, and with SoPIP2;1, a typical alpha-helical protein. Experiments over different time ranges were performed to analyze the kinetic effects of detergent removal with cyclodextrins on the formation of 2D crystals. The quality of the produced crystals was assessed with negative stain electron microscopy, cryo-electron microscopy and diffraction. Both proteins yielded crystals comparable in quality to previous crystallization reports.

Aquaporins↗

PubMed2006

Characterization of microfabricated probes for combined atomic force and high-resolution scanning electrochemical microscopy.

A combined atomic force and scanning electrochemical microscope probe is presented. The probe is electrically insulated except at the very apex of the tip, which has a radius of curvature in the range of 10-15 nm. Steady-state cyclic voltammetry measurements for the reduction of Ru(NH3)6Cl3 and feedback experiments showed a distinct and reproducible response of the electrode. These experimental results agreed with finite element simulations for the corresponding diffusion process. Sequentially topographical and electrochemical studies of Pt lines deposited onto Si3N4 and spaced 100 nm apart (edge to edge) showed a lateral electrochemical resolution of 10 nm.

Journal Article↗

PubMed2006

Collaborative EM image processing with the IPLT image processing library and toolbox.

We present the Image Processing Library and Toolbox, IPLT, in the context of a collaborative electron microscopy processing effort, which has driven the evolution of our software architecture over the last years. The high-level interface design as well as the underlying implementations are described to demonstrate the flexibility of the IPLT framework. It aims to support the wide range of skills and interests of methodologically oriented scientists who wish to implement their ideas and algorithms as processing code.

Algorithms↗

PubMed2006

Single-molecule studies of membrane proteins.

Characterizing membrane proteins with single-molecule techniques provides structural and functional insights that cannot be obtained with conventional approaches. Recent studies show that atomic force microscopy (AFM) in the context of a 'lab on a tip' enables the measurement of multiple parameters of membrane proteins. This multifunctional tool can be applied to probe the oligomeric states and conformational changes of membrane protein assemblies in their native environment. The ability to determine diverse properties at high spatial resolution facilitates the mapping of structural flexibilities, electrostatic potentials and electric currents. By using the AFM tip as tweezer, it is possible to characterize unfolding and refolding pathways of single proteins and the location of their molecular interactions. These interactions dictate the stability of the protein and might be modulated by ligands that alter the protein's functional state.

Animals↗

PubMed2006

Cytotoxin ClyA from Escherichia coli assembles to a 13-meric pore independent of its redox-state.

ClyA is a pore-forming toxin from virulent Escherichia coli and Salmonella enterica strains. Here, we show that the intrinsic hemolytic activity of ClyA is independent of its redox state, and that the assembly of both reduced and oxidized ClyA to the ring-shaped oligomer is triggered by contact with lipid or detergent. A rate-limiting conformational transition in membrane-bound ClyA monomers precedes their assembly to the functional pore. We obtained a three-dimensional model of the detergent-induced oligomeric complex at 12 A resolution by combining cryo- and negative stain electron microscopy with mass measurements by scanning transmission electron microscopy. The model reveals that 13 ClyA monomers assemble into a cylinder with a hydrophobic cap region, which may be critical for membrane insertion.

Cysteine↗

PubMed2006

Structure of the rhodopsin dimer: a working model for G-protein-coupled receptors.

G-protein-coupled receptors (GPCRs) participate in virtually all physiological processes. They constitute the largest and most structurally conserved family of signaling molecules. Several class C GPCRs have been shown to exist as dimers in their active form and growing evidence indicates that many, if not all, class A receptors also form dimers and/or higher-order oligomers. High-resolution crystal structures are available only for the detergent-solubilized light receptor rhodopsin (Rho), the archetypal class A GPCR. In addition, Rho is the only GPCR for which the presumed higher-order oligomeric state has been demonstrated, by imaging native disk membranes using atomic force microscopy (AFM). Based on these data and the X-ray structure, an atomic model of Rho dimers has been proposed, a model that is currently scrutinized in various ways. AFM has also been used to measure the forces required to unfold single Rho molecules, thereby revealing which residues are responsible for Rho's stability. Recent functional analyses of fractions from solubilized disk membranes revealed that higher-order Rho oligomers are the most active species. These and other results have enhanced our understanding of GPCR structure and function.

Animals↗

PubMed2006

Functional and structural characterization of rhodopsin oligomers.

A major question in G protein-coupled receptor signaling concerns the quaternary structure required for signal transduction. Do these transmembrane receptors function as monomers, dimers, or larger oligomers? We have investigated the oligomeric state of the model G protein-coupled receptor rhodopsin (Rho), which absorbs light and initiates a phototransduction-signaling cascade that forms the basis of vision. In this study, different forms of Rho were isolated using gel filtration techniques in mild detergents, including n-dodecyl-beta-D-maltoside, n-tetradecyl-beta-D-maltoside, and n-hexadecyl-beta-D-maltoside. The quaternary structure of isolated Rho was determined by transmission electron microscopy, demonstrating that in micelles containing n-dodecyl-beta-D-maltoside, Rho exists as a mixture of monomers and dimers whereas in n-tetradecyl-beta-D-maltoside and n-hexadecyl-beta-D-maltoside Rho forms higher ordered structures. Especially in n-hexadecyl-beta-D-maltoside, most of the particles are present in tightly packed rows of dimers. The oligomerization of Rho seems to be important for interaction with its cognate G protein, transducin. Although the activated Rho (Meta II) monomer or dimers are capable of activating the G protein, transducin, the activation process is much faster when Rho exists as organized dimers. Our studies provide direct comparisons between signaling properties of Meta II in different quaternary complexes.

Animals↗

PubMed2006

Detecting molecular interactions that stabilize native bovine rhodopsin.

Using single-molecule force spectroscopy we probed molecular interactions within native bovine rhodopsin and discovered structural segments of well-defined mechanical stability. Highly conserved residues among G protein-coupled receptors were located at the interior of individual structural segments, suggesting a dual role for these segments in rhodopsin. Firstly, structural segments stabilize secondary structure elements of the native protein, and secondly, they position and hold the highly conserved residues at functionally important environments. Two main classes of force curves were observed. One class corresponded to the unfolding of rhodopsin with the highly conserved Cys110-Cys187 disulfide bond remaining intact and the other class corresponded to the unfolding of the entire rhodopsin polypeptide chain. In the absence of the Cys110-Cys187 bond, the nature of certain molecular interactions within folded rhodopsin was altered. These changes highlight the structural importance of this disulfide bond and may form the basis of dysfunctions associated with its absence.

Animals↗

PubMed2006

Conformational change of bacteriorhodopsin quantitatively monitored by microcantilever sensors.

Bacteriorhodopsin proteoliposomes were used as a model system to explore the applicability of micromechanical cantilever arrays to detect conformational changes in membrane protein patches. The three main results of our study concern: 1), reliable functionalization of micromechanical cantilever arrays with proteoliposomes using ink jet spotting; 2), successful detection of the prosthetic retinal removal (bleaching) from the bacteriorhodopsin protein by measuring the induced nanomechanical surface stress change; and 3), the quantitative response thereof, which depends linearly on the amount of removed retinal. Our results show this technique to be a potential tool to measure membrane protein-based receptor-ligand interactions and conformational changes.

Bacteriorhodopsins↗

PubMed2006

Bacteriorhodopsin chimeras containing the third cytoplasmic loop of bovine rhodopsin activate transducin for GTP/GDP exchange.

The mechanisms by which G-protein-coupled receptors (GPCRs) activate G-proteins are not well understood due to the lack of atomic structures of GPCRs in an active form or in GPCR/G-protein complexes. For study of GPCR/G-protein interactions, we have generated a series of chimeras by replacing the third cytoplasmic loop of a scaffold protein bacteriorhodopsin (bR) with various lengths of cytoplasmic loop 3 of bovine rhodopsin (Rh), and one such chimera containing loop 3 of the human beta2-adrenergic receptor. The chimeras expressed in the archaeon Halobacterium salinarum formed purple membrane lattices thus facilitating robust protein purification. Retinal was correctly incorporated into the chimeras, as determined by spectrophotometry. A 2D crystal (lattice) was evidenced by circular dichroism analysis, and proper organization of homotrimers formed by the bR/Rh loop 3 chimera Rh3C was clearly illustrated by atomic force microscopy. Most interestingly, Rh3C (and Rh3G to a lesser extent) was functional in activation of GTPgamma35S/GDP exchange of the transducin alpha subunit (Galphat) at a level 3.5-fold higher than the basal exchange. This activation was inhibited by GDP and by a high-affinity peptide analog of the Galphat C terminus, indicating specificity in the exchange reaction. Furthermore, a specific physical interaction between the chimera Rh3C loop 3 and the Galphat C terminus was demonstrated by cocentrifugation of transducin with Rh3C. This Galphat-activating bR/Rh chimera is highly likely to be a useful tool for studying GPCR/G-protein interactions.

Animals↗

PubMed2006

Double hexameric ring assembly of the type III protein translocase ATPase HrcN.

The specialized type III secretion (T3S) apparatus of pathogenic and symbiotic Gram-negative bacteria comprises a complex transmembrane organelle and an ATPase homologous to the F1-ATPase beta subunit. The T3S ATPase HrcN of Pseudomonas syringae associates with the inner membrane, and its ATP hydrolytic activity is stimulated by dodecamerization. The structure of dodecameric HrcN (HrcN12) determined to 1.6 nm by cryo-electron microscopy is presented. HrcN12 comprises two hexameric rings that are probably stacked face-to-face by the association of their C-terminal domains. It is 11.5 +/- 1.0 nm in diameter, 12.0 +/- 2.0 nm high and has a 2.0-3.8 nm wide inner channel. This structure is compared to a homology model based on the structure of the F1-beta-ATPase. A model for its incorporation within the T3S apparatus is presented.

Adenosine Triphosphatases↗

PubMed2005

Localization of the coactivator Cdh1 and the cullin subunit Apc2 in a cryo-electron microscopy model of vertebrate APC/C.

The anaphase-promoting complex/cyclosome (APC/C) is a ubiquitin ligase with essential functions in mitosis, meiosis, and G1 phase of the cell cycle. APC/C recognizes substrates via coactivator proteins such as Cdh1, and bound substrates are ubiquitinated by E2 enzymes that interact with a hetero-dimer of the RING subunit Apc11 and the cullin Apc2. We have obtained three-dimensional (3D) models of human and Xenopus APC/C by angular reconstitution and random conical tilt (RCT) analyses of negatively stained cryo-electron microscopy (cryo-EM) preparations, have determined the masses of these particles by scanning transmission electron microscopy (STEM), and have mapped the locations of Cdh1 and Apc2. These proteins are located on the same side of the asymmetric APC/C, implying that this is where substrates are ubiquitinated. We have further identified a large flexible domain in APC/C that adopts a different orientation upon Cdh1 binding. Cdh1 may thus activate APC/C both by recruiting substrates and by inducing conformational changes.

Anaphase-Promoting Complex-Cyclosome↗

PubMed2005

Co-axial association of recombinant eye lens aquaporin-0 observed in loosely packed 3D crystals.

Aquaporin-0 (AQP0) is the major membrane protein in vertebrate eye lenses. It has been proposed that AQP0 tetramers mediate contact between membranes of adjacent lens fiber cells, which would be consistent with the extraordinarily narrow inter-cellular spacing. We have obtained 3D crystals of recombinant bovine AQP0 that diffract to 7.0 A resolution. The crystal packing was determined by molecular replacement and shows that, within the cubic lattice, AQP0 tetramers are associated head-to-head along their 4-fold axes. Oligomeric states larger than the tetramer were also observed in solution by native gel electrophoresis and analytical ultracentrifugation methods. In the crystals, there are no direct contacts between octamers, and it can thus be inferred that crystalline order is mediated solely by the detergent belts surrounding the membrane protein. Across the tetramer-tetramer interface, extracellular loops A and C interdigitate at the center and the perimeter of the octamer, respectively. The octamer structure is compared with that of the recently determined structure of truncated ovine AQP0 derived from electron diffraction of 2D crystals. Intriguingly, also in these crystals, octamers are observed, but with significantly different relative tetramer-tetramer orientations. The interactions observed in the loosely packed 3D crystals reported here may in fact represent an in vivo association mode between AQP0 tetramers from juxtaposed membranes in the eye lens.

Animals↗

PubMed2005

The V-antigen of Yersinia forms a distinct structure at the tip of injectisome needles.

Many pathogenic bacteria use injectisomes to deliver effector proteins into host cells through type III secretion. Injectisomes consist of a basal body embedded in the bacterial membranes and a needle. In Yersinia, translocation of effectors requires the YopB and YopD proteins, which form a pore in the target cell membrane, and the LcrV protein, which assists the assembly of the pore. Here we report that LcrV forms a distinct structure at the tip of the needle, the tip complex. This unique localization of LcrV may explain its crucial role in the translocation process and its efficacy as the main protective antigen against plague.

Antigens, Bacterial↗

PubMed2005

A novel method for detergent concentration determination.

A fast and precise method for detergent concentration determination is presented. (Patent applications for the method described here have been submitted (EP05011904 and US60/702,261). Depending on the interest of the scientific community, the system will be commercialized. (For further information contact Hervé-W. Rémigy at the e-mail address below.) A small droplet of the detergent solution is deposited on a piece of Parafilm M and side views are recorded by two orthogonally arranged TV cameras. The droplet contours are then approximated by ellipses to determine the contact angles. Comparison of the observed contact angle values to calibrated standard curves of known detergent concentrations gives the concentration of the detergent assessed. A range of commonly used detergents was studied to demonstrate the reproducibility and precision of this simple method. As a first application, the detergent binding capacity of the Escherichia coli galactose/proton symporter (GalP) was assessed. Aggregation of GalP was observed when <260 +/- 5 dodecyl-beta,D-maltoside molecules were bound to one GalP molecule. These measurements document the efficacy of the drop-shape based detergent concentration determination described.

Biophysics↗

PubMed2005

Structural insights into the secretin PulD and its trypsin-resistant core.

Limited proteolysis, secondary structure and biochemical analyses, mass spectrometry, and mass measurements by scanning transmission electron microscopy were combined with cryo-electron microscopy to generate a three-dimensional model of the homomultimeric complex formed by the outer membrane secretin PulD, an essential channel-forming component of the type II secretion system from Klebsiella oxytoca. The complex is a dodecameric structure composed of two rings that sandwich a closed disc. The two rings form chambers on either side of a central plug that is part of the middle disc. The PulD polypeptide comprises two major, structurally quite distinct domains; an N domain, which forms the walls of one of the chambers, and a trypsin-resistant C domain, which contributes to the outer chamber, the central disc, and the plug. The C domain contains a lower proportion of potentially transmembrane beta-structure than classical outer membrane proteins, suggesting that only a small part of it is embedded within the outer membrane. Indeed, the C domain probably extends well beyond the confines of the outer membrane bilayer, forming a centrally plugged channel that penetrates both the peptidoglycan on the periplasmic side and the lipopolysaccharide and capsule layers on the cell surface. The inner chamber is proposed to constitute a docking site for the secreted exoprotein pullulanase, whereas the outer chamber could allow displacement of the plug to open the channel and permit the exoprotein to escape.

Bacterial Outer Membrane Proteins↗