Search PubMed⌕ Search

Biomedical subjects

Alfred Pingoud

Publications and source records attributed to Alfred Pingoud.

At least 19 recordsLinked to original sources

Reversible inactivation of the CG specific SssI DNA (cytosine-C5)-methyltransferase with a photocleavable protecting group.

Caging of proteins by conjugation with a photocleavable group is a powerful approach for reversibly blocking enzymatic activity. Here we describe the covalent modification of the bacterial SssI DNA methyltransferase (M.SssI) with the cysteine-specific reagent 4,5-dimethoxy-2-nitrobenzylbromide (DMNBB). M.SssI contains two cysteine residues; replacement of the active-site Cys141 with Ser resulted in an approximately 100-fold loss of enzymatic activity; this indicates an important role for this residue in catalysis. However, replacement of Cys368 with Ala did not affect methyltransferase activity. Treatment of the Cys368Ala mutant enzyme with DMNBB led to an almost complete loss of activity. Irradiation of the inactivated enzyme with near-ultraviolet light (320-400 nm) restored 60 % of the catalytic activity. This indicates that caging by DMNBB can be used for the reversible inactivation of M.SssI.

Base Sequence↗

Engineering site-specific endonucleases.

Site-specific endonucleases are involved in many aspects of the biochemistry of nucleic acids. Restriction enzymes and their relatives have become paradigms for enzymes acting on DNA. Numerous efforts have been devoted to changing their specificity by rational protein design, with, by and large, little success, presumably because the recognition process is highly redundant and recognition and catalysis are tightly coupled. This chapter describes one of the few successful examples of a change in specificity--namely the conversion of the mismatch repair nuclease, MutH, which, when stimulated by MutS and MutL, nicks hemimethylated d(GATC) sites, into a variant that cleaves fully methylated DNA as well as hemimethylated and unmethylated DNA. This chapter will describe the various steps involved in this design project, starting from the analysis of the structure and the identification of candidate amino acid residues responsible for sensing the methylation status, to the generation and characterization of MutH variants with an altered specificity toward hemimethylated d(GATC) sites.

Amino Acid Sequence↗

From monomeric to homodimeric endonucleases and back: engineering novel specificity of LAGLIDADG enzymes.

Monomeric homing endonucleases of the LAGLIDADG family recognize DNA in a bipartite manner, reflecting the underlying structural assembly of two protein domains (A and B) related by pseudo 2-fold symmetry. This architecture allows for changes in DNA specificity via the distinct combination of these half-site domains. The key to engineering such hybrid proteins lies in the LAGLIDADG two-helix bundle that forms both the domain interface and the endonuclease active site. In this study, we utilize domain A of the monomeric I-DmoI to demonstrate the feasibility of generating functional homodimeric endonucleases that recognize palindromic DNA sequences derived from the original, non-palindromic target. Wild-type I-DmoI domain A is capable of forming a homodimer (H-DmoA) that binds tightly to, but does not cleave efficiently, its anticipated DNA target. Partial restoration of DNA cleavage ability was obtained by re-engineering the LAGLIDADG dimerization interface (H-DmoC). Upon fusing two copies of H-DmoC via a short peptide linker, a novel, site-specific DNA endonuclease was created (H-DmoC2). Like I-DmoI, H-DmoC2 is thermostable and cleaves the new target DNA to generate the predicted 4 nt 3'-OH overhangs but, unlike I-DmoI, H-DmoC2 retains stringent cleavage specificity when substituting Mn2+ for Mg2+ as co-factor. This novel endonuclease allows speculation regarding specificity of monomeric LAGLIDADG proteins, while it supports the evolutionary genesis of these proteins by a gene duplication event.

Amino Acid Motifs↗

Developing a programmed restriction endonuclease for highly specific DNA cleavage.

Specific cleavage of large DNA molecules at few sites, necessary for the analysis of genomic DNA or for targeting individual genes in complex genomes, requires endonucleases of extremely high specificity. Restriction endonucleases (REase) that recognize DNA sequences of 4-8 bp are not sufficiently specific for this purpose. In principle, the specificity of REases can be extended by fusion to sequence recognition modules, e.g. specific DNA-binding domains or triple-helix forming oligonucleotides (TFO). We have chosen to extend the specificity of REases using TFOs, given the combinatorial flexibility this fusion offers in addressing a short, yet precisely recognized restriction site next to a defined triple-helix forming site (TFS). We demonstrate here that the single chain variant of PvuII (scPvuII) covalently coupled via the bifunctional cross-linker N-(gamma-maleimidobutryloxy) succinimide ester to a TFO (5'-NH2-[CH2](6 or 12)-MPMPMPMPMPPPPPPT-3', with M being 5-methyl-2'-deoxycytidine and P being 5-[1-propynyl]-2'-deoxyuridine), cleaves DNA specifically at the recognition site of PvuII (CAGCTG) if located in a distance of approximately one helical turn to a TFS (underlined) complementary to the TFO ('addressed' site: 5'-TTTTTTTCTCTCTCTCN(approximately 10)CAGCTG-3'), leaving 'unaddressed' PvuII sites intact. The preference for cleavage of an 'addressed' compared to an 'unaddressed' site is >1000-fold, if the cleavage reaction is initiated by addition of Mg2+ ions after preincubation of scPvuII-TFO and substrate in the absence of Mg2+ ions to allow triple-helix formation before DNA cleavage. Single base pair substitutions in the TFS prevent addressed DNA cleavage by scPvuII-TFO.

Cross-Linking Reagents↗

Identification of base-specific contacts in protein-DNA complexes by photocrosslinking and mass spectrometry: a case study using the restriction endonuclease SsoII.

Specific protein-nucleic acid interactions are of paramount importance for the propagation, maintenance and expression of genetic information. Restriction endonucleases serve as model systems to study the mechanisms of DNA recognition by proteins. SsoII is a Type II restriction endonuclease that recognizes the double stranded sequence downward arrow CCNGG and cleaves it in the presence of Mg(2+)-ions, as indicated. SsoII shows sequence similarity over a stretch of approximately 70 amino acid residues with several other restriction endonucleases that recognize a similar sequence as SsoII (Cfr10I, EcoRII, NgoMIV, PspGI). In NgoMIV this stretch is involved in DNA recognition and cleavage, as shown by the crystal structure analysis of an enzyme-product complex. To find out whether the presumptive DNA recognition region in SsoII is indeed in contact with DNA we have photocrosslinked SsoII with an oligodeoxyribonucleotide in which the first guanine of the recognition sequence was replaced by 5-iodouracil. Following digestion by trypsin, the peptide-oligodeoxyribonucleotide conjugate was purified by Fe(3+)-IMAC and then incubated with hydrogen fluoride, which hydrolyzes the oligodeoxyribonucleotide to yield the peptide-deoxyuridine conjugate. The site of photocrosslinking was identified by MALDI-TOF-MS and MALDI-TOF-MS/MS to be Trp189, adjacent to Arg188, which aligns with Arg194 in NgoMIV, involved in recognition of the second guanine in the NgoMIV recognition sequence G downward arrow CCGGC. This result confirms previously published conclusions drawn on the basis of a mutational analysis of SsoII. The methodology that was employed here can be used in principle to identify the DNA binding site of any protein.

Amino Acid Sequence↗

Structural insights into the mechanism of nuclease A, a betabeta alpha metal nuclease from Anabaena.

Nuclease A (NucA) is a nonspecific endonuclease from Anabaena sp. capable of degrading single- and double-stranded DNA and RNA in the presence of divalent metal ions. We have determined the structure of the delta(2-24),D121A mutant of NucA in the presence of Zn2+ and Mn2+ (PDB code 1ZM8). The mutations were introduced to remove the N-terminal signal peptide and to reduce the activity of the nonspecific nuclease, thereby reducing its toxicity to the Escherichia coli expression system. NucA contains a betabeta alpha metal finger motif and a hydrated Mn2+ ion at the active site. Unexpectedly, NucA was found to contain additional metal binding sites approximately 26 A apart from the catalytic metal binding site. A structural comparison between NucA and the closest analog for which structural data exist, the Serratia nuclease, indicates several interesting differences. First, NucA is a monomer rather than a dimer. Second, there is an unexpected structural homology between the N-terminal segments despite a poorly conserved sequence, which in Serratia includes a cysteine bridge thought to play a regulatory role. In addition, although a sequence alignment had suggested that NucA lacks a proposed catalytic residue corresponding to Arg57 in Serratia, the structure determined here indicates that Arg93 in NucA is positioned to fulfill this role. Based on comparison with DNA-bound nuclease structures of the betabeta alpha metal finger nuclease family and available mutational data on NucA, we propose that His124 acts as a catalytic base, and Arg93 participates in the catalysis possibly through stabilization of the transition state.

Amino Acid Motifs↗

Interaction of DNA fragmentation factor (DFF) with DNA reveals an unprecedented mechanism for nuclease inhibition and suggests that DFF can be activated in a DNA-bound state.

DNA fragmentation factor (DFF) is a complex of the DNase DFF40 (CAD) and its chaperone/inhibitor DFF45 (ICAD-L) that can be activated during apoptosis to induce DNA fragmentation. Here, we demonstrate that DFF directly binds to DNA in vitro without promoting DNA cleavage. DNA binding by DFF is mediated by the nuclease subunit, which can also form stable DNA complexes after release from DFF. Recombinant and reconstituted DFF is catalytically inactive yet proficient in DNA binding, demonstrating that the nuclease subunit in DFF is inhibited in DNA cleavage but not in DNA binding, revealing an unprecedented mode of nuclease inhibition. Activation of DFF in the presence of naked DNA or isolated nuclei stimulates DNA degradation by released DFF40 (CAD). In transfected HeLa cells transiently expressed DFF associates with chromatin, suggesting that DFF could be activated during apoptosis in a DNA-bound state.

Animals↗

Specificity changes in the evolution of type II restriction endonucleases: a biochemical and bioinformatic analysis of restriction enzymes that recognize unrelated sequences.

How restriction enzymes with their different specificities and mode of cleavage evolved has been a long standing question in evolutionary biology. We have recently shown that several Type II restriction endonucleases, namely SsoII (downward arrow CCNGG), PspGI (downward arrow CCWGG), Eco-RII (downward arrow CCWGG), NgoMIV (G downward arrow CCGGC), and Cfr10I (R downward arrow CCGGY), which recognize similar DNA sequences (as indicated, where the downward arrows denote cleavage position), share limited sequence similarity over an interrupted stretch of approximately 70 amino acid residues with MboI, a Type II restriction endonuclease from Moraxella bovis (Pingoud, V., Conzelmann, C., Kinzebach, S., Sudina, A., Metelev, V., Kubareva, E., Bujnicki, J. M., Lurz, R., Luder, G., Xu, S. Y., and Pingoud, A. (2003) J. Mol. Biol. 329, 913-929). Nevertheless, MboI has a dissimilar DNA specificity (downward arrow GATC) compared with these enzymes. In this study, we characterize MboI in detail to determine whether it utilizes a mechanism of DNA recognition similar to SsoII, PspGI, EcoRII, NgoMIV, and Cfr10I. Mutational analyses and photocross-linking experiments demonstrate that MboI exploits the stretch of approximately 70 amino acids for DNA recognition and cleavage. It is therefore likely that MboI shares a common evolutionary origin with SsoII, PspGI, EcoRII, NgoMIV, and Cfr10I. This is the first example of a relatively close evolutionary link between Type II restriction enzymes of widely different specificities.

Amino Acid Sequence↗

Structural and functional characterization of mitochondrial EndoG, a sugar non-specific nuclease which plays an important role during apoptosis.

Combining sequence analysis, structure prediction, and site-directed mutagenesis, we have investigated the mechanism of catalysis and substrate binding by the apoptotic mitochondrial nuclease EndoG, which belongs to the large family of DNA/RNA non-specific betabetaalpha-Me-finger nucleases. Catalysis of phosphodiester bond cleavage involves several highly conserved amino acid residues, namely His143, Asn174, and Glu182 required for water activation and metal ion binding, as well as Arg141 required for proper substrate binding and positioning, respectively. These results indicate that EndoG basically follows a similar mechanism as the Serratia nuclease, the best studied representative of the family of DNA/RNA non-specific nucleases, but that differences are observed for transition state stabilisation. In addition, we have identified two putative DNA/RNA binding residues of bovine EndoG, Arg135 and Arg186, strictly conserved only among mammalian members of the nuclease family, suggesting a similar mode of binding to single and double-stranded nucleic acid substrates by these enzymes. Finally, we demonstrate by ectopic expression of active and inactive variants of bovine EndoG in HeLa and CV1-cells that extramitochondrial active EndoG by itself induces cell death, whereas expression of an enzymatically inactive variant does not.

Amino Acid Sequence↗

Chimeras of the homing endonuclease PI-SceI and the homologous Candida tropicalis intein: a study to explore the possibility of exchanging DNA-binding modules to obtain highly specific endonucleases with altered specificity.

Homing endonucleases are extremely specific endodeoxyribonucleases. In vivo, these enzymes confer mobility on their genes by inducing a very specific double-strand cut in cognate alleles that lack the cooling sequence for the homing endonuclease; the cellular repair of the double-strand break with the endonuclease-containing allele as a template leads to integration of the endonuclease gene, completing the homing process. As a result of their extreme sequence specificity, homing endonucleases are promising tools for genome engineering. For this purpose, it is desirable to design enzymes with defined new specificities. To analyse which DNA-binding elements are potential candidates for use in the design of enzymes with modified or even new specificity, we produced several chimeric proteins derived from the Saccharomyces cerevisiae VMA1 intein (PI-SceI) and the related Candida tropicalis VMA1 intein. Although the mature Candida intein is devoid of endonucleolytic activity, the exchange of two DNA-binding modules of PI-SceI with the homologous elements from the Candida intein results in an active endonuclease. The low sequence homology in these modules indicates that different protein-DNA contacts are responsible for the recognition of related DNA sequences. This flexibility in DNA recognition should, in principle, allow endonucleases to be produced with new specificities useful for genome engineering.

Amino Acid Sequence↗

DNA recognition by the homing endonuclease PI-SceI involves a divalent metal ion cofactor-induced conformational change.

PI-SceI, a homing endonuclease of the LAGLIDADG family, consists of two domains involved in DNA cleavage and protein splicing, respectively. Both domains cooperate in binding the recognition sequence. Comparison of the structures of PI-SceI in the absence and presence of substrate reveals major conformational changes in both the protein and DNA. Notably, in the protein-splicing domain the loop comprising residues 53-70 and adopts a "closed" conformation, thus enabling it to interact with the DNA. We have studied the dynamics of DNA binding and subsequent loop movement by fluorescence techniques. Six amino acids in loop53-70 were individually replaced by cysteine and modified by fluorescein. The interaction of the modified PI-SceI variants with the substrate, unlabeled or labeled with tetramethylrhodamine, was analyzed in equilibrium and stopped-flow experiments. A kinetic scheme was established describing the interaction between PI-SceI and DNA. It is noteworthy that the apparent hinge-flap motion of loop53-70 is only observed in the presence of a divalent metal ion cofactor. Substitution of the major Mg2+-binding ligands in PI-SceI, Asp-218 and Asp-326, by Asn or "nicking" PI-SceI with trypsin at Arg-277, which interferes with formation of an active enzyme.substrate complex, both prevent the conformational change of loop53-70. Deletion of the loop inactivates the enzyme. We conclude that loop53-70 is an important structural element that couples DNA recognition by the splicing domain with DNA cleavage by the catalytic domain and as such "communicates" with the Mg2+ binding sites at the catalytic centers.

Aspartic Acid↗

Real-time polymerase chain reaction.

Real-time PCR is the state-of-the-art technique to quantify nucleic acids for mutation detection, genotyping and chimerism analysis. Since its development in the 1990s, many different assay formats have been developed and the number of real-time PCR machines of different design is continuously increasing. This review provides a survey of the instruments and assay formats available and discusses the pros and cons of each. The principles of quantitative real-time PCR and melting curve analysis are explained. The quantification algorithms with internal and external standardization are derived mathematically, and potential pitfalls for the data analysis are discussed. Finally, examples of applications of this extremely versatile technique are given that demonstrate the enormous impact of real-time PCR on life sciences and molecular medicine.

Nucleic Acids↗

Experimental evidence for a beta beta alpha-Me-finger nuclease motif to represent the active site of the caspase-activated DNase.

The caspase-activated DNase (CAD) is an important nuclease involved in apoptotic DNA degradation. Results of a sequence comparison of CAD proteins with beta beta alpha-Me-finger nucleases in conjunction with a mutational and chemical modification analysis suggest that CAD proteins constitute a new family of beta beta alpha-Me-finger nucleases. Nucleases of this family have widely different functions but are characterized by a common active-site fold and similar catalytic mechanisms. According to our results and comparisons with related nucleases, the active site of CAD displays features that partly resemble those of the colicin E9 and partly those of the T4 endonuclease VII active sites. We suggest that the catalytic mechanism of CAD involves a conserved histidine residue, acting as a general base, and another histidine as well as an aspartic acid residue required for cofactor binding. Our findings provide a first insight into the likely active-site structure and catalytic mechanism of a nuclease involved in the degradation of chromosomal DNA during programmed cell death.

Amino Acid Motifs↗

Structural and biochemical characterization of a new Mg(2+) binding site near Tyr94 in the restriction endonuclease PvuII.

We have determined the crystal structure of the PvuII endonuclease in the presence of Mg(2+). According to the structural data, divalent metal ion binding in the PvuII subunits is highly asymmetric. The PvuII-Mg(2+) complex has two distinct metal ion binding sites, one in each monomer. One site is formed by the catalytic residues Asp58 and Glu68, and has extensive similarities to a catalytically important site found in all structurally examined restriction endonucleases. The other binding site is located in the other monomer, in the immediate vicinity of the hydroxyl group of Tyr94; it has no analogy to metal ion binding sites found so far in restriction endonucleases. To assign the number of metal ions involved and to better understand the role of Mg(2+) binding to Tyr94 for the function of PvuII, we have exchanged Tyr94 by Phe and characterized the metal ion dependence of DNA cleavage of wild-type PvuII and the Y94F variant. Wild-type PvuII cleaves both strands of the DNA in a concerted reaction. Mg(2+) binding, as measured by the Mg(2+) dependence of DNA cleavage, occurs with a Hill coefficient of 4, meaning that at least two metal ions are bound to each subunit in a cooperative fashion upon formation of the active complex. Quenched-flow experiments show that DNA cleavage occurs about tenfold faster if Mg(2+) is pre-incubated with enzyme or DNA than if preformed enzyme-DNA complexes are mixed with Mg(2+). These results show that Mg(2+) cannot easily enter the active center of the preformed enzyme-DNA complex, but that for fast cleavage the metal ions must already be bound to the apoenzyme and carried with the enzyme into the enzyme-DNA complex. The Y94F variant, in contrast to wild-type PvuII, does not cleave DNA in a concerted manner and metal ion binding occurs with a Hill coefficient of 1. These results indicate that removal of the Mg(2+) binding site at Tyr94 completely disrupts the cooperativity in DNA cleavage. Moreover, in quenched-flow experiments Y94F cleaves DNA about ten times more slowly than wild-type PvuII, regardless of the order of mixing. From these results we conclude that wild-type PvuII cleaves DNA in a fast and concerted reaction, because the Mg(2+) required for catalysis are already bound at the enzyme, one of them at Tyr94. We suggest that this Mg(2+) is shifted to the active center during binding of a specific DNA substrate. These results, for the first time, shed light on the pathway by which metal ions as essential cofactors enter the catalytic center of restriction endonucleases.

Binding Sites↗

PspGI, a type II restriction endonuclease from the extreme thermophile Pyrococcus sp.: structural and functional studies to investigate an evolutionary relationship with several mesophilic restriction enzymes.

We present here the first detailed biochemical analysis of an archaeal restriction enzyme. PspGI shows sequence similarity to SsoII, EcoRII, NgoMIV and Cfr10I, which recognize related DNA sequences. We demonstrate here that PspGI, like SsoII and unlike EcoRII or NgoMIV and Cfr10I, interacts with and cleaves DNA as a homodimer and is not stimulated by simultaneous binding to two recognition sites. PspGI and SsoII differ in their basic biochemical properties, viz. stability against chemical denaturation and proteolytic digestion, DNA binding and the pH, MgCl(2) and salt-dependence of their DNA cleavage activity. In contrast, the results of mutational analyses and cross-link experiments show that PspGI and SsoII have a very similar DNA binding site and catalytic center as NgoMIV and Cfr10I (whose crystal structures are known), and presumably also as EcoRII, in spite of the fact that these enzymes, which all recognize variants of the sequence -/CC-GG- (/ denotes the site of cleavage), are representatives of different subgroups of type II restriction endonucleases. A sequence comparison of all known restriction endonuclease sequences, furthermore, suggests that several enzymes recognizing other DNA sequences also share amino acid sequence similarities with PspGI, SsoII and EcoRII in the region of the presumptive active site. These results are discussed in an evolutionary context.

Amino Acid Sequence↗

Validation of an algorithm for automatic quantification of nucleic acid copy numbers by real-time polymerase chain reaction.

Real-time quantitative polymerase chain reaction (PCR) with on-line fluorescence detection has become an important technique not only for determination of the absolute or relative copy number of nucleic acids but also for mutation detection, which is usually done by measuring melting curves. Optimum assay conditions have been established for a variety of targets and experimental setups, but only limited attention has been directed to data evaluation and validation of the results. In this work, algorithms for the processing of real-time PCR data are evaluated for several target sequences (p53, IGF-1, PAI-1, Factor VIIc) and compared to the results obtained by standard procedures. The algorithms are implemented in software called SoFAR, which allows fully automatic analysis of real-time PCR data obtained with a Roche LightCycler instrument. The software yields results with considerably increased precision and accuracy of quantifications. This is achieved mainly by the correction of amplification-independent signal trends and a robust fit of the exponential phase of the signal curves. The melting curve data are corrected for signal changes not due to the melting process and are smoothed by fitting cubic splines. Therefore, sensitivity, resolution, and accuracy of melting curve analyses are improved.

Algorithms↗

Real-time PCR-based method for the estimation of genome sizes.

The fast and reliable estimation of the genome sizes of various species would allow for a systematic analysis of many organisms and could reveal insights into evolutionary processes. Many methods for the estimation of genome sizes have already been described. The classical methods are based on the determination of the phosphate content in the DNA backbone of total DNA isolated from a defined number of cells or on reassociation kinetics of high molecular weight genomic DNA (c(0)t assay). More recent techniques employ DNA-specific fluorescent dyes in flow cytometry analysis, image analysis or absorption cytometry after Feulgen staining. The method presented here is based on the absolute quantification of genetic elements in a known amount (mass) of genomic DNA by real-time quantitative PCR. The method was evaluated on three different eukaryotic species, Saccharomyces cerevisiae (12.1 Mb), Xiphophorus maculatus (550 Mb) and Homo sapiens sapiens (2.9 Gb), and found to be fast, highly accurate and reliable.

Animals↗