Search PubMed⌕ Search

Biomedical subjects

Alexander Vaskevich

Publications and source records attributed to Alexander Vaskevich.

9 recordsLinked to original sources
PubMed2005

Sensitivity of transmission surface plasmon resonance (T-SPR) spectroscopy: self-assembled multilayers on evaporated gold island films.

The distance dependence of the localized surface plasmon (SP) extinction of discontinuous gold films is a crucial issue in the application of transmission surface plasmon resonance (T-SPR) spectroscopy to chemical and biological sensing. This derives from the usual sensing configuration, whereby an analyte binds to a selective receptor layer on the gold film at a certain distance from the metal surface. In the present work the distance sensitivity of T-SPR spectroscopy of 1.0-5.0 nm (nominal thickness) gold island films evaporated on silanized glass substrates is studied by using coordination-based self-assembled multilayers, offering thickness tuning in the range from approximately 1 to approximately 15 nm. The morphology, composition and optical properties of the Au/multilayer systems were studied at each step of multilayer construction. High-resolution scanning electron microscopy (HRSEM) showed no apparent change in the underlying Au islands, while atomic force microscopy (AFM) indicated flattening of the surface topography during multilayer construction. A regular growth mode of the organic layers was substantiated by X-ray photoelectron spectroscopy (XPS). Transmission UV-visible spectra showed an increase of the extinction and a red shift of the maximum of the SP band upon addition of organic layers, establishing the distance dependence of the Au SP absorbance. The distance sensitivity of T-SPR spectroscopy can be varied by using characteristic substrate parameters, that is, Au nominal thickness and annealing. In particular, effective sensitivity up to a distance of at least 15 nm is demonstrated with 5 nm annealed Au films. It is shown that intensity measurements, particularly in the plasmon intensity change (PIC) presentation, provide an alternative to the usually measured plasmon band position, offering good accuracy and the possibility of measuring at a single wavelength. The present distance sensitivity results provide the basis for further development of T-SPR transducers based on receptor-coated Au island films.

Journal Article↗
PubMed2005

Coordination-based gold nanoparticle layers.

Gold nanoparticle (NP) mono- and multilayers were constructed on gold surfaces using coordination chemistry. Hydrophilic Au NPs (6.4 nm average core diameter), capped with a monolayer of 6-mercaptohexanol, were modified by partial substitution of bishydroxamic acid disulfide ligand molecules into their capping layer. A monolayer of the ligand-modified Au NPs was assembled via coordination with Zr4+ ions onto a semitransparent Au substrate (15 nm Au, evaporated on silanized glass and annealed) precoated with a self-assembled monolayer of the bishydroxamate disulfide ligand. Layer-by-layer construction of NP multilayers was achieved by alternate binding of Zr4+ ions and ligand-modified NPs onto the first NP layer. Characterization by atomic force microscopy (AFM), ellipsometry, wettability, transmission UV-vis spectroscopy, and cross-sectional transmission electron microscopy showed regular growth of NP layers, with a similar NP density in successive layers and gradually increased roughness. The use of coordination chemistry enables convenient step-by-step assembly of different ligand-possessing components to obtain elaborate structures. This is demonstrated by introducing nanometer-scale vertical spacing between a NP layer and the gold surface, using a coordination-based organic multilayer. Electrical characterization of the NP films was carried out using conductive AFM, emphasizing the barrier properties of the organic spacer multilayer. The results exhibit the potential of coordination self-assembly in achieving highly controlled composite nanostructures comprising molecules, NPs, and other ligand-derivatized components.

Gold↗
PubMed2005

Preparative manipulation of gold nanoparticles by reversible binding to a polymeric solid support.

A preparative scheme is presented for controlled modification of gold nanoparticles (NPs) by using reversible binding to a polymeric solid support through boronic acid chemistry. Octanethiol-capped Au NPs were bound to a boronic acid functionalized resin by custom-synthesized bifunctional linker molecules. The NPs were chemically released from the resin to the solution, with one (or a few) linker molecules embedded in their capping layer. This was confirmed by rebinding the linker-derivatized NPs to a boronic resin, exploiting the reversibility of the boronic acid/diol chemistry. The same scheme was employed to demonstrate a new method for affinity separation of NPs by means of a solid-phase reaction. The use of boronic acid provides versatility and chemical reversibility, while the polymeric solid support affords the separation and preparative aspects. The method presented here may be useful in various facets of NP handling, manipulation, and separation.

Journal Article↗
PubMed2004

Layer-by-layer assembly of ordinary and composite coordination multilayers.

Coordination self-assembly of bishydroxamate-based metal-organic multilayers on gold employing a layer-by-layer (LbL) approach was investigated. It is shown that the solution chemistry of the participating metal ion has a marked influence on the composition and properties of the multilayers. Use of Ce4+ and particularly zirconium(IV) acetylacetonate (Zr(acac)4) solutions in the ion-binding step of multilayer construction leads to multilayers with a near-stoichiometric metal ion-to-ligand ratio, suggesting a structure close to that predicted by a simple coordination self-assembly scheme. On the other hand use of a ZrCl4 solution as the source of metal ions in the multilayer construction leads to a multilayer with greater thickness and a large excess of Zr(IV), evenly distributed between the organic layers. In the latter case, a ratio of ca. 1:2 between the excess Zr and oxygen, as well as long-term Zr4+ binding experiments showing deposition of ZrO2, suggest the formation of a zirconia-type nanophase between the bishydroxamate organic repeat units during multilayer self-assembly. Hence, while the multilayer prepared using Zr(acac)4 solution appears to represent a "true" coordination-based structure, the one prepared using ZrCl4 is best described as a composite organic-ceramic multilayer. Composite multilayers prepared in this way display different properties from those of the stoichiometric ones, such as improved dielectric behavior and higher stiffness. Even greater mechanical stability is obtained with multilayers constructed using alternate binding of ZrCl4 and Ce4+. The concept of LbL formation of coordination-based composite organic-ceramic structures may be useful in obtaining nanometer-scale structures with tunable properties.

Cesium↗
PubMed2004

Biological sensing using transmission surface plasmon resonance spectroscopy.

Ultrathin gold island films evaporated on transparent substrates offer promising transducers for chemical and biological sensing in the transmission surface plasmon resonance (T-SPR) mode. In the present work, the applicability of T-SPR-based systems to biosensing is demonstrated, using a well-established biological model system. Au island films were evaporated on polystyrene slides and modified with a biotinylated monolayer via a multistep surface reaction, the latter assisted by the good adhesion of metal islands to polystyrene. The biotin-derivatized Au island film was then used as a biological recognition surface for selective sensing of avidin binding, distinguishing between specific and nonspecific binding to the substrate. Transduction of the binding event into an optical signal was achieved by T-SPR spectroscopy, using plasmon intensity measurements, rather than wavelength change, for maximal sensitivity and convenience. T-SPR spectroscopy of Au island films is shown to be an effective tool for monitoring the binding of biological molecules to receptor layers on the Au surface and a promising approach to label-free optical biosensing.

Biosensing Techniques↗
PubMed2004

Widely-applicable gold substrate for the study of ultrathin overlayers.

Ultrathin films on gold substrates have been the subject of enormous scientific and technological interest. Comprehensive study of such systems requires concomitant application of a variety of complementary characterization techniques. The reliability of the result is frequently hampered by the fact that different characterization methods impose different requirements on the Au substrate, resulting in the need to use different types of Au substrates for different measurements, possibly influencing the overlayer structure. This results in an average, rather than exact, structure determination. Here, we show that 15-nm-thick Au films evaporated at 0.5 A/sec on silanized glass and annealed are semi-transparent, electrically conducting, and morphologically well-defined, showing a smooth, [111] textured surface. Such Au films provide a high-quality, widely applicable and relatively inexpensive platform for ultrathin overlayers, enabling characterization by a wide spectrum of experimental methods, applied to the same substrate. The exceptional qualities and analytical capabilities of such substrates are demonstrated with several different systems: (i) Cu underpotential deposition (upd); (ii) alkanethiol self-assembly; (iii) formation of Au nanoparticle layers; (iv) binding of the chromophore protoporphyrin IX (PPIX) to a monolayer of 11-mercaptoundecanoic acid (MUA). In the latter case it is shown that the use of Cu(2+) ions for binding between the carboxylate groups of PPIX and MUA promotes better organization of the porphyrin layer.

Glass↗
PubMed2003

Preparation of graded materials by laterally controlled template synthesis.

A novel scheme is presented for the synthesis of graded materials by electrodeposition in porous insulating templates. Lateral control of copper electrodeposition in nanoporous alumina membranes is achieved by application of a lateral potential gradient on a thin Au film evaporated on the membrane, used as the cathode. Formation of metal gradients in the membranes is shown to occur under conditions where essentially no gradient is formed on similar bare electrodes. This is attributed to the permanent resistivity of the thin Au film between the pores, which does not disappear upon Cu deposition, allowing a potential gradient to be maintained. Formation of a copper gradient in porous alumina membranes by uniform deposition followed by gradient dissolution is also demonstrated. These results establish the feasibility of controlled electrodeposition and gradient formation in nanoporous insulating templates.

Journal Article↗
PubMed2002

Transmission surface-plasmon resonance (T-SPR) measurements for monitoring adsorption on ultrathin gold island films.

Evaporation of ultrathin (1.3-10 nm nominal thickness) gold films onto quartz or mica leads to the formation of a layer of rather uniform gold islands on the transparent support. The morphology of ultrathin gold island films of various thicknesses was studied by using atomic force microscopy (AFM) and scanning electron microscopy (SEM) imaging. The surface plasmon (SP) absorption characteristic of such films is highly sensitive to the surrounding medium, with the plasmon band changing in intensity and wavelength upon binding of various molecules to the surface. The binding process can be monitored quantitatively by measuring the changes in the gold SP absorption, by using transmission UV/Vis spectroscopy. The method, termed transmission surface plasmon resonance (T-SPR) spectroscopy, is shown to be applicable to both chemically and physically adsorbed molecules, in liquid or gas phase, with measurements carried out either ex situ or in situ (real-time measurements) using a variety of molecular probes. Binding to a preformed molecular layer on the Au surface produces a similar response, suggesting the possible use of T-SPR for selective sensing. The sensitivity of T-SPR spectroscopy in detecting molecular binding to the gold depends strongly on the film preparation conditions, and may be comparable to that obtained in surface plasmon resonance (SPR) sensing.

Journal Article↗