Search PubMed⌕ Search

Biomedical subjects

Akihiro Hino

Publications and source records attributed to Akihiro Hino.

At least 19 recordsLinked to original sources
PubMed2006

Rapid quantification methods for genetically modified maize contents using genomic DNAs pretreated by sonication and restriction endonuclease digestion for a capillary-type real-time PCR system with a plasmid reference standard.

For rough quantitative analysis of genetically modified maize contents, rapid methods for measurement of the copy numbers of the cauliflower mosaic virus 35S promoter region (P35S) and MON810 construct-specific gene (MON810) using a combination of a capillary-type real-time PCR system with a plasmid DNA were established. To reduce the characteristic differences between the plasmid DNA and genomic DNA, we showed that pretreatment of the extracted genomic DNA by a combination of sonication and restriction endonuclease digestion before measurement is effective. The accuracy and reproducibility of this method for MON810 content (%) at a level of 5.0% MON810 mixed samples were within a range from 4.26 to 5.11% in the P35S copy number quantification. These methods should prove to be a useful tool to roughly quantify GM maize content.

DNA Restriction Enzymes↗
PubMed2006

Circumventing air bubbles in microfluidic systems and quantitative continuous-flow PCR applications.

Polymerase chain reaction (PCR) is an essential part of research based on genomics or cell analysis. The development of a microfluidic device that would be suitable for high-temperature-based reactions therefore becomes an important contribution towards the integration of micro-total analysis systems (muTAS). However, problems associated with the generation of air bubbles in the microchannels before the introduction of the assay liquid, which we call the "initial start-up" in this study, made the flow irregular and unstable. In this report, we have tried to address these problems by adapting a novel liquid-flow method for high-temperature-based reactions. A PDMS-based microfluidic device was fabricated by soft-lithography techniques and placed on a cartridge heater. The generation of the air bubbles was prevented by introducing the fluorinated oil, an inert and highly viscous liquid, as the cap just before the introduction of the sample solutions into the microchannels. The technique was applied for continuous-flow PCR, which could perform PCR on-chip in a microfluidic system. For the evaluation of practical accuracy, plasmid DNA that serves as a reference molecule for the quantification of genetically modified (GM) maize was used as the template DNA for continuous-flow PCR. After PCR, the products were collected in a vial and analyzed by gel electrophoresis to confirm the accuracy of the results. Additionally, quantitative continuous-flow PCR was performed using TaqMan technology on our PCR device. A laser detection system was also used for the quantitative PCR method. We observed a linear relationship between the threshold cycle (Ct) and the initial DNA concentration. These results showed that it would be possible to quantify the initial copies of the template DNA on our microfluidic device. Accurate quantitative DNA analysis in microfluidic systems is required for the integration of PCR with muTAS, thus we anticipate that our device would have promising potential for applications in a wide range of research.

DNA↗
PubMed2006

Quantification of genetically modified soybeans using a combination of a capillary-type real-time PCR system and a plasmid reference standard.

Because the labeling of grains and feed- and foodstuffs is mandatory if the genetically modified organism (GMO) content exceeds a certain level of approved genetically modified varieties in many countries, there is a need for a rapid and useful method of GMO quantification in food samples. In this study, a rapid detection system was developed for Roundup Ready Soybean (RRS) quantification using a combination of a capillary-type real-time PCR system, a LightCycler real-time PCR system, and plasmid DNA as the reference standard. In addition, we showed for the first time that the plasmid and genomic DNA should be similar in the established detection system because the PCR efficiencies of using plasmid DNA and using genomic DNA were not significantly different. The conversion factor (Cf) to calculate RRS content (%) was further determined from the average value analyzed in three laboratories. The accuracy and reproducibility of this system for RRS quantification at a level of 5.0% were within a range from 4.46 to 5.07% for RRS content and within a range from 2.0% to 7.0% for the relative standard deviation (RSD) value, respectively. This system rapidly monitored the labeling system and had allowable levels of accuracy and precision.

Food, Genetically Modified↗
PubMed2006

A detection method of CryIAc protein for identifying genetically modified rice using the lateral flow strip assay.

We examined the lateral flow strip assay for identifying unauthorized genetically modified (GM) rice. The GM rice expresses the Bacillus thuringiensis (Bt) toxin, CryIAc protein, which confers tolerance to insects. The recombinant CryIAc protein was prepared from the inclusion bodies of an E. coli. strain into which the CryIAc gene had been inserted, using gel filtration chromatography. The lateral flow strip assay for the identification of GM cotton which also expresses CryIAc protein, was applied to unpolished rice and polished rice spiked with recombinant CryIAc protein. The spiked recombinant CryIAc protein was clearly detected at the level of 0.012 microg/g in both the unpolished and polished rice. After loading of the extract on the strip, a 60 -minute stand time is necessary to clearly detect CryIAc protein. The detection limit was approximately 12 ng CryIAc protein per gram of rice. These results suggest that the lateral flow strip assay for GM cotton can be used to detect CryIAc protein expressed in GM rice.

Bacillus thuringiensis Toxins↗
PubMed2006

Detection method for genetically modified papaya using duplex PCR.

A simple and rapid method for the identification of genetically modified (GM) papaya, derived from Line 55-1, was developed by modifying the Japanese official PCR method. Genomic DNA was directly extracted from the fresh fruit without the lyophilization step, using a commercial silica-based kit. To develop a duplex PCR method which simultaneously detects the GM papaya-specific gene and the intrinsic papain gene, the papain 2-5'/3' (amplicon size; 184 bp) primer pair for the detection of the papain gene was newly designed within the region of the products (211 bp) amplified using the papain 1-5'/-3' primer pair adopted in the Japanese official PCR method. To detect the GM papaya-specific gene, the primer pair Nos C-5'/CaM N-3' described in the Japanese official method was used. The DNA sequences of the GM papaya gene and the intrinsic papain gene were co-amplified using the PCR method in a single tube. The developed duplex PCR method allows the simultaneous detection of the products by means of agarose gel electrophoresis or microchip electrophoresis. The proposed method for GM papaya identification is simple and rapid.

Carica↗
PubMed2006

[Laboratory-performance study of quantitative PCR methods to analyze an approved genetically modified maize (Mon810 Line)].

A laboratory-performance study was carried out to investigate factors affecting the reliability of the quantitative PCR method to analyze an approved genetically modified (GM) maize (Mon810 line). Test maize powdered samples were prepared as blind samples containing a high (assigned value; 5.45%) or low (assigned value; 0.35%) concentration of the Mon810 line. After confirmation of their homogeneity, they were provided to 27 laboratories participating in the collaborative study. The data were collected from all laboratories and statistically analyzed. Two laboratories, which used a Roche LightCycler (LC), reported significantly high test values. A further examination showed that the LC method is greatly affected by the equipment itself or PCR reagents, resulting in poor repeatability. On the other hand, some laboratories, which used ABI quantitative PCR equipment, reported erroneous test values. In these laboratories, the errors appeared to have been due to inadequate quality and/or yield of DNA. To identify factors affecting the test values, analysis of the measured values for the taxon-specific gene will be useful. Furthermore, the modified silica-gel membrane DNA extraction method made it possible to extract the required amounts of DNA more easily and in a shorter time than before.

DNA, Plant↗
PubMed2005

Development of a multiplex polymerase chain reaction method for simultaneous detection of eight events of genetically modified maize.

In this study, we developed a novel multiplex polymerase chain reaction (PCR) method for simultaneous detection of up to eight events of genetically modified (GM) maize within a single reaction. The eight detection primer pairs designed to be construct specific for eight respective GM events (i.e., Bt11, Event176, GA21, MON810, MON863, NK603, T25, and TC1507) and a primer pair for an endogenous reference gene, ssIIb, were included in the nonaplex(9plex) PCR system, and its amplified products could be distinguished by agarose gel and capillary electrophoreses based on their different lengths. The optimal condition enabled us to reliably amplify two fragments corresponding to a construct specific sequence and a taxon specific ssIIb in each of the eight events of GM maize and all of nine fragments in a simulated GM mixture containing as little as 0.25% (w/w) each of eight events of GM maize. These results indicate that this multiplex PCR method could be an effective qualitative detection method for screening GM maize.

Base Sequence↗
PubMed2005

Quantitative detection system for maize sample containing combined-trait genetically modified maize.

Various countries have established regulations that stipulate the labeling of agricultural commodities, feed, and food products that contain or are made from genetically modified (GM) material or that contain adventitious GM material in amounts that exceed certain threshold levels. While regulations in some countries refer to GM material on a weight per weight (w/w) percentage, the currently applied detection methods do not directly measure the w/w percentage of the GM material. Depending on the particular method and the sample matrix it is applied to, the conversion of analytical results to a w/w percentage is challenging or not possible. The first rapid PCR system for GM maize detection on a single kernel basis has been developed. The equipment for the grinding of individual kernels and a silica membrane-based 96-well DNA extraction kit were both significantly revised and optimized for this particular purpose, respectively. We developed a multiplex real-time PCR method for the rapid quantification of GM DNA sequences in the obtained DNA solutions. In addition, a multiplex qualitative PCR detection method allows for the simultaneous detection of different GM maize traits in each kernel and thereby for identification of individual kernels that contain a combination of two or more GM traits. Especially for grain samples that potentially contain combined-trait GM maize kernels, the proposed methods can deliver informative results in a rapid, precise, and reliable manner.

DNA, Plant↗
PubMed2005

Development of taxon-specific sequences of common wheat for the detection of genetically modified wheat.

Qualitative and quantitative Polymerase Chain Reaction (PCR) systems aimed at the specific detection and quantification of common wheat DNA are described. Many countries have issued regulations to label foods that include genetically modified organisms (GMOs). PCR technology is widely recognized as a reliable and useful technique for the qualitative and quantitative detection of GMOs. Detection methods are needed to amplify a target GM gene, and the amplified results should be compared with those of the corresponding taxon-specific reference gene to obtain reliable results. This paper describes the development of a specific DNA sequence in the waxy-D1 gene for common wheat (Triticum aestivum L.) and the design of a specific primer pair and TaqMan probe on the waxy-D1 gene for PCR analysis. The primers amplified a product (Wx012) of 102 bp. It is indicated that the Wx012 DNA sequence is specific to common wheat, showing homogeneity in qualitative PCR results and very similar quantification accuracy along 19 distantly related common wheat varieties. In Southern blot and real-time PCR analyses, this sequence showed either a single or a low number of copy genes. In addition, by qualitative and quantitative PCR using wx012 primers and a wx012-T probe, the limits of detection of the common wheat genome were found to be about 15 copies, and the reproducibility was reliable. In consequence, the PCR system using wx012 primers and wx012-T probe is considered to be suitable for use as a common wheat-specific taxon-specific reference gene in DNA analyses, including GMO tests.

Base Sequence↗
PubMed2005

Temporal changes in NCAM immunoreactivity during taste cell differentiation and cell lineage relationships in taste buds.

Neural cell adhesion molecule (NCAM) is a type III cell marker in the taste buds. In order to clarify the cell type of Mash1-expressing cells in taste buds, expression of NCAM was examined in Mash1-expressing taste cells of adult mice in comparison with gustducin- and T1r3-expressing cells, using a combination of NCAM immunohistochemistry and in situ hybridization. About 98% of Mash1-expressing cells were NCAM immunopositive (IP), suggesting that Mash1-expressing cells should be categorized as type III cells. Unexpectedly, small subsets of gustducin- and T1r3-expressing cells were also found to be NCAM-IP, contradicting previous immunohistochemical studies in rats, in which gustducin-IP cells were observed specifically in type II cells, which do not have NCAM immunoreactivity. Examinations of developing taste buds showed temporal changes in the ratio of NCAM-IP cells in gustducin- and T1r3-expressing cells; the ratio of NCAM-IP cells in these gene-expressing cells were approximately 90% at 0.5 days after birth and decreased markedly during development. In contrast, the majority of Mash1-expressing cells showed constant NCAM immunoreactivity throughout development. In addition, BrdU-labeling experiments showed that the differentiation of Mash1-expressing cells precedes those of gustducin- and T1r3-expressing cells in taste buds of adult mice. These results suggest that T1r3- and gustducin-expressing cells are NCAM-IP at the beginning of cell differentiation, and that NCAM immunoreactivity in gustducin- and T1r3-expressing cells might remain from the previous developmental stage expressing Mash1.

Animals↗
PubMed2005

Comparative studies of the quantification of genetically modified organisms in foods processed from maize and soy using trial producing.

Seven types of processed foods, namely, cornstarch, cornmeal, corn puffs, corn chips, tofu, soy milk, and boiled beans, were trial produced from 1 and 5% (w/w) genetically modified (GM) mixed raw materials. In this report, insect resistant maize (MON810) and herbicide tolerant soy (Roundup Ready soy, 40-3-2) were used as representatives of GM maize and soy, respectively. Deoxyribonucleic acid (DNA) was extracted from the raw materials and the trial-produced processed food using two types of methods, i.e., the silica membrane method and the anion exchange method. The GM% values of these samples were quantified, and the significant differences between the raw materials and the trial-produced processed foods were statistically confirmed. There were some significant differences in the comparisons of all processed foods. However, our quantitative methods could be applied as a screening assay to tofu and soy milk because the differences in GM% between the trial-produced processed foods and their raw materials were lower than 13 and 23%, respectively. In addition, when quantitating with two primer pairs (SSIIb 3, 114 bp; SSIIb 4, 83 bp for maize and Le1n02, 118 bp; Le1n03, 89 bp for soy), which were targeted within the same taxon specific DNA sequence with different amplicon sizes, the ratios of the copy numbers of the two primer pairs (SSIIb 3/4 and Le1n02/03) decreased with time in a heat-treated processing model using an autoclave. In this report, we suggest that the degradation level of DNA in processed foods could be estimated from these ratios, and the probability of GM quantification could be experimentally predicted from the results of the trial producing.

Animals↗
PubMed2005

Applicability of the quantification of genetically modified organisms to foods processed from maize and soy.

The applicability of quantifying genetically modified (GM) maize and soy to processed foods was investigated using heat treatment processing models. The detection methods were based on real-time quantitative polymerase chain reaction (PCR) analysis. Ground seeds of insect resistant GM maize (MON810) and glyphosate tolerant Roundup Ready (RR) soy were dissolved in water and were heat treated by autoclaving for various time intervals. The calculated copy numbers of the recombinant and taxon specific deoxyribonucleic acid (DNA) sequences in the extracted DNA solution were found to decrease with time. This decrease was influenced by the PCR-amplified size. The conversion factor (Cf), which is the ratio of the recombinant DNA sequence to the taxon specific DNA sequence and is used as a constant number for calculating GM% at each event, tended to be stable when the sizes of PCR products of two DNA sequences were nearly equal. The results suggested that the size of the PCR product plays a key role in the quantification of GM organisms in processed foods. It is believed that the Cf of the endosperm (3n) is influenced by whether the GM originated from a paternal or maternal source. The embryos and endosperms were separated from the F1 generation seeds of five GM maize events, and their Cf values were measured. Both paternal and maternal GM events were identified. In these, the endosperm Cf was lower than that of the embryo, and the embryo Cf was lower than that of the endosperm. These results demonstrate the difficulties encountered in the determination of GM% in maize grains (F2 generation) and in processed foods from maize and soy.

Animals↗
PubMed2005

[Laboratory performance study of the quantitative detection method for genetically modified soybeans (roundup ready soybeans 40-3-2)].

To investigate important factors affecting the analytical results, a laboratory-performance study was attempted for the Japanese official methods to detect genetically modified (GM) soybeans (40-3-2). Test samples containing 0, 1 and 5% GM soya powder in non-GM soya powder was prepared. A set of 3 test samples was sent to the participating laboratories along with the protocol. The data were collected from all laboratories and statistically analyzed. In the real-time PCR detection method, the average values of the GM 1% and 5% samples were both much lower than the spiked value because the laboratories using a silica-membrane DNA extraction method underestimated the GM value. On the other hand, the laboratories using other extraction methods, such as the CTAB method obtained values close to the spiked value. These results suggest that use of the silica-membrane DNA extraction method may result in underestimation of the GM content in the real-time PCR method. In the ELISA method, the average value of 5% spiked samples appears to be slightly higher than the fortified value. But, overall, it was considered that reported values were close to the spiked level.

DNA, Plant↗
PubMed2005

Detection of genetically modified organisms in foreign-made processed foods containing corn and potato.

Investigations of the validity of labeling regarding genetically modified (GM) products were conducted using polymerase chain reaction (PCR) methods for foreign-made processed foods made from corn and potato purchased in the Tokyo area and in the USA. Several kinds of GM crops were detected in 12 of 32 samples of processed corn samples. More than two GM events for which safety reviews have been completed in Japan were simultaneously detected in 10 samples. GM events MON810 and Bt11 were most frequently detected in the samples by qualitative PCR methods. MON810 was detected in 11 of the 12 samples, and Bt11 was detected in 6 of the 12 samples. In addition, Roundup Ready soy was detected in one of the 12 samples. On the other hand, CBH351, for which the safety assessment was withdrawn in Japan, was not detected in any of the 12 samples. A trial quantitative analysis was performed on six of the GM maize qualitatively positive samples. The estimated amounts of GM maize in these samples ranged from 0.2 to 2.8%, except for one sample, which contained 24.1%. For this sample, the total amount found by event-specific quantitative analysis was 23.8%. Additionally, Roundup Ready soy was detected in one sample of 21 potato-processed foods, although GM potatoes were not detected in any sample.

DNA, Plant↗
PubMed2004

A strong nerve dependence of sonic hedgehog expression in basal cells in mouse taste bud and an autonomous transcriptional control of genes in differentiated taste cells.

The nerve-dependency of gene expression in mouse taste bud was examined through an analysis of changes in gene expression in and around the taste buds in circumvallate papillae after surgery of cranial nerve IXth (glossopharyngeal nerve). The number of cells expressing T1r3, gustducin, Mash1 and Nkx2.2 gradually decreased after denervation. However, the expression intensity of these genes was barely influenced by denervation, and strong expression was observed at 6 days after denervation. In contrast, the basal cell-specific Sonic hedgehog (Shh) expression in the taste buds was decreased markedly at 6 h after denervation. In the regeneration process of taste buds, Shh expression was observed during a very early phase before taste bud formation. These results indicate the autonomous transcriptional control of genes in differentiated taste cells and the strong nerve-dependency of Shh expression in basal cells. Furthermore, in order to reveal the mitotic activity of Shh-expressing cells in taste buds, the BrdU-labeling experiments were performed using a combination of BrdU-immunohistochemistry and in situ hybridization. BrdU-signal was very rarely observed in Shh-expressing cells immediately after BrdU injection, and the signals were noted mainly in Ptc-expressing cells. BrdU signals rapidly increased in Shh-expressing cells in following 12 h and began to decrease after 2 days post-injection. These results suggest that most Shh-expressing cells are not mitotically active, but that Shh-expressing cells may be in the early transient developmental state of taste cells in taste buds.

Animals↗