Biomedical subjects

Akihiko Kikuchi

Publications and source records attributed to Akihiko Kikuchi.

At least 19 recordsLinked to original sources

PubMed2006

Fractal analysis of the maternal surface of the placenta: preliminary report.

AIMS: The objective of this study was to determine whether the maternal surface of the placenta is fractal, and whether the mean fractal dimension differs according to the gestational age and clinically or pathologically different conditions. METHODS: Using digitized images of the maternal surface of 75 placentas, fractal dimensions were measured with a fractal analysis software. RESULTS: The mean fractal dimension of the maternal surface of the placentas significantly exceeded the topological dimension of a surface (= 2). This means that the morphological pattern of the maternal surface fulfills the mathematical definition of fractal structures. Among the three different groups of gestational age, the mean fractal dimension in 22-29 weeks was significantly lower than that in 30-36 and 37-41 weeks (p = 0.022 and 0.014, respectively). Although not significantly different (p = 0.149), in 30-36 weeks the mean fractal dimension of the placentas complicated by pregnancy-induced hypertension (PIH) was greater than that without PIH. CONCLUSION: Fractal geometry, a vocabulary of irregular shapes, can be useful for describing quantitatively the architecture of the maternal surface of the placenta and become a useful tool for analyzing physiological and pathological placental formation mathematically.

Adolescent↗

PubMed2006

Development of transplantable genetically modified corneal epithelial cell sheets for gene therapy.

The purpose of this study was to establish a method for the fabrication of exogenous gene-transferred, transplantable corneal epithelial cell sheets. Corneo-limbal epithelial cells collected from USA eye bank eyes were transduced with an EGFP-expressing lentiviral vector at differential MOI. Multi-layered corneal epithelial cell sheets were fabricated by co-cultivation of transduced cells and mitomycin C-treated 3T3 feeder layers on temperature-responsive culture dishes. These cultured epithelial cells could be harvested as intact sheets by simply lowering the temperature. The number of EGFP-positive cells was increased as the MOI raised, and at an MOI of 100, nearly 100% of the superficial cells showed strong EGFP expression. Histological analysis revealed that EGFP was expressed in all layers of the cell sheet of which cell source was transduced with the lentiviral vector at an MOI of 100. Immunofluorescence data showed that p63 was also expressed in the basal layer of the same cell sheet. These results suggest that this technique will likely be applicable to ex vivo gene therapies for various corneal disorders.

Cells, Cultured↗

PubMed2006

Heterotypic cell interactions on a dually patterned surface.

It is worth investigating heterotypic cell-cell interactions by mimicking their in vivo structures and environment. In the present study, physiological cellular response and behavior of hepatocytes and endothelial cells were investigated by controlling their contact periphery in a new co-culture system. Rat primary hepatocytes and bovine endothelial cells were co-cultured on a dually patterned surface. Hepatic physiological functions such as albumin secretion and ammonium metabolism were enhanced by increasing heterotypic cell-cell interactions in a patterned co-culture. Furthermore, enhanced hepatic functions through heterotypic interactions are effective within a limited area apart from endothelial cells as evidenced by immunofluorescence staining of hepatic intracellular albumin, indicating that heterotypic interactions act in a paracrine manner. Thus, heterotypic cell communications that play indispensable roles in increasing hepatic physiological functions should be obtained with an increasing periphery of two-cell domains. These findings are important for the reconstruction of complex tissues such as liver and pancreas.

Animals↗

PubMed2006

Bio-functionalized thermoresponsive interfaces facilitating cell adhesion and proliferation.

Bio-functionalized thermoresponsive culture interfaces co-immobilized with cell adhesive peptide, RGDS, and cell growth factor, insulin (INS), are investigated to promote initial cell adhesion and cell growth for further cell sheet engineering applications. These bio-functionalized interfaces were prepared by electron beam-induced copolymerization of N-isopropylacrylamide (IPAAm) with its carboxyl-derivatized analog, 2-carboxyisopropylacrylamide (CIPAAm), and grafting onto tissue culture polystyrene dishes, followed by immobilization of RGDS and/or INS to CIPAAm carboxyls. Adhesion and proliferation of bovine carotid artery endothelial cells (ECs) were examined on the RGDS-INS co-immobilized thermoresponsive interfaces. Immobilized RGDS facilitated initial EC adhesion on the surfaces and INS modification was demonstrated to induce EC proliferation, respectively. More pronounced EC growth was indicated by co-immobilization of appropriate amount of RGDS and INS. This may be due to synergistic effect of direct co-stimulation of adhered ECs by surface-immobilized RGDS and INS molecules. ECs grown on the RGDS-INS co-immobilized thermoresponsive interfaces can also be recovered spontaneously as viable tissue monolayers by solely reducing culture temperature. RGDS-INS co-immobilized thermoresponsive interfaces strongly supported initial EC adhesion and growth than unmodified thermoresponsive surfaces even under serum-free culture. Addition of soluble growth factors to serum-free culture medium effectively induced EC proliferation to confluency. Co-immobilization of cell adhesion peptides and growth factors on thermoresponsive surfaces should be effective for rapid preparation of intact cell sheets and their utilization to regenerative medicine.

Acrylamides↗

PubMed2006

Electrical coupling of cardiomyocyte sheets occurs rapidly via functional gap junction formation.

Previously, we have successfully created pulsatile myocardial tissue grafts using our novel technology, "cell sheet engineering", that layers cell sheets fabricated on temperature-responsive culture dishes to form three-dimensional (3-D) structures. Electrical coupling is established between layered neonatal rat cardiomyocyte sheets, resulting in the synchronized beating of 3-D myocardial tissues. However, the mechanism by which these layered cardiomyocyte sheets communicate electrically is not well-understood. In this study, we used a multiple-electrode extracellular recording system and demonstrated that bilayer cardiomyocyte sheets coupled electrically with slight delays 34+/-2 min (mean+/-SEM) after layering. These delays gradually decreased and the electrical actions of layered cell sheets were completely coupled 46+/-3 min (mean+/-SEM) after initial layering. Immunohistological analysis showed that connexin43, a gap junction (GJ)-related protein, existed not only at cell-to-cell interfaces but also on the free cell membrane in the cardiomyocyte sheet. Additionally, neither connexin40 nor connexin45, but only connexin43 was detected between bilayer cardiomyocyte sheets within 30 min after layering. Dye transfer assay demonstrated that the exchange of small molecules via GJs occurred within 30 min. The cell sheet manipulation technique using the temperature-responsive culture dishes has substantial advances and the exciting potential in the fields of cell and tissue physiology, as well as tissue engineering.

Action Potentials↗

PubMed2006

Transplantable retinal pigment epithelial cell sheets for tissue engineering.

The native retinal pigment epithelium (RPE) exists as a monolayer structure and is critically involved in the maintenance of photoreceptors. Damage or destruction of the RPE due to a variety of diseases therefore often results in loss of vision. With regenerative purposes in mind, we have examined various culture conditions such as the initial cell density and the addition of various supplements in an effort to produce transplantable RPE cell sheets that can be harvested without defects. We demonstrate that the cell density in cultured RPE sheets increased linearly with the number of seeded cells and that RPE sheets were harvested without defects and limited contraction due to cytoskeletal reorganization, when TGF-beta2 was added to the growth medium. Results from histological analysis and the measurement of trans-epithelial resistance also demonstrates that these RPE cell sheets exist as monolayer structure, similar to the native RPE, with intact cell-to-cell junctions. Therefore, these methods provide significant insight into the fabrication of transplantable RPE cell sheets that can be applied to RPE regenerative therapies to restore lost vision.

Cell Count↗

PubMed2006

Study of temperature-responsibility on the surfaces of a thermo-responsive polymer modified stationary phase.

We investigated a thermo-sensitive polymer, poly(N-isopropylacrylamide) (PNIPAAm), which is the basis of an HPLC stationary phase. We prepared a PNIPAAm terminally-modified surface. In this study, we investigated the effect of PNIPAAm on the surface of a stationary phase on separation based on changes of the retention time with the temperature step gradient. As the temperature changed the surface property of the stationary phase switched from hydrophilic to hydrophobic. The retention on the polymer-modified stationary phase remarkably changed upon changing the temperature. Using a column packed with PNIPAAm-modified silica, the separation of steroids was carried out by changing the temperature. With increasing temperature, an increased interaction between solutes and PNIPAAm-grafted surfaces of the stationary phases was observed. A temperature-dependent resolution of steroids was achieved using only water as a mobile phase. The PNIPAAm-modified surface of the stationary phase exhibited temperature-controlled hydrophilic-hydrophobic changes. The drastic and reversible surface hydrophilic-hydrophobic property alteration for PNIPAAm terminally-grafted surfaces should be due to rapid changes in the polymer hydration state around the polymer's transition temperature. A solvent gradient elution-like effect could be achieved with a single mobile phase by programmed temperature changes during chromatographic runs. This system should be highly useful to control the function and property of the stationary phase for HPLC only by changing the temperature with an aqueous solvent.

Acrylic Resins↗

PubMed2006

Aqueous chromatography system using pH- and temperature-responsive stationary phase with ion-exchange groups.

We report on the development of a novel analytical HPLC technique of nonsteroidal anti-inflammatory drugs (NSAIDs), such as ibuprofen, ketoprofen and naproxen, with an isocratic aqueous mobile phase. In this study, we designed a new pH- and temperature-responsive copolymer of N-isopropylacrylamide (NIPAAm), butyl methacrylate (BMA) and N,N-dimethylaminopropylacrylamide (DMAPAAm). The copolymer was modified with cross-linked poly(NIPAAm-co-BMA-co-DMAPAAm) (IBD) hydrogel on to aminopropyl silica beads, and the products were evaluated as HPLC packing materials for an ion-exchange- and temperature-responsive chromatography. The property of the surface of the stationary phase was altered from hydrophilic to hydrophobic, and from charged to non-charged by changes in the temperature and pH. In addition, it is possible that ion-exchange groups can appear or be hidden on the polymer chain surface by temperature changes. The interactions of NSAIDs with this stationary phase were controlled by the temperature and the pH with a constant aqueous mobile phase. PH- and temperature-responsive chromatography is expected to be useful for the separation of pharmaceuticals and biomolecules.

Acrylamides↗

PubMed2006

Polysurgery of cell sheet grafts overcomes diffusion limits to produce thick, vascularized myocardial tissues.

Recently, the field of tissue engineering has progressed rapidly, but poor vascularization remains a major obstacle in bioengineering cell-dense tissues, limiting the viable size of constructs due to hypoxia, nutrient insufficiency, and waste accumulation. Therefore, new technologies for fabricating functional tissues with a well-organized vasculature are required. In the present study, neonatal rat cardiomyocytes were harvested as intact sheets from temperature-responsive culture dishes and stacked into cell-dense myocardial tissues. However, the thickness limit for layered cell sheets in subcutaneous tissue was approximately 80 microm (3 layers). To overcome this limitation, repeated transplantation of triple-layer grafts was performed at 1, 2, or 3 day intervals. The two overlaid grafts completely synchronized and the whole tissues survived without necrosis in the 1 or 2 day interval cases. Multistep transplantation also created approximately 1 mm thick myocardium with a well-organized microvascular network. Furthermore, functional multilayer grafts fabricated over a surgically connectable artery and vein revealed complete graft perfusion via the vessels and ectopic transplantation of the grafts was successfully performed using direct vessel anastomoses. These cultured cell sheet integration methods overcome long-standing barriers to producing thick, vascularized tissues, revealing a possible solution for the clinical repair of various damaged organs, including the impaired myocardium.

Animals↗

PubMed2006

An actuated pump on-chip powered by cultured cardiomyocytes.

Cellular functions are frequently exploited as processing components for integrated chemical systems such as biochemical reactors and bioassay systems. Here, we have created a new cell-based microsystem exploiting the intrinsic pulsatile mechanical functions of cardiomyocytes to build a cellular micropump on-chip using cardiomyocyte sheets as prototype bio-microactuators. We first demonstrate cell-based control of fluid motion in a model microchannel without check valves and evaluate the potential performance of the bio-actuation. For this purpose, a poly(dimethylsiloxane) (PDMS) microchip with a microchannel equipped with a diaphragm and a push-bar structure capable of harnessing collective cell fluid mechanical forces was coupled to a cultured pulsating cardiomyocyte sheet, activating cell-based fluid movement in the microchannel by actuating the diaphragm. Cell oscillation frequency and correlated fluid displacement in this system depended on temperature. When culture temperature was increased, collective cell contraction frequency remained cooperative and synchronous but increased, while displacement was slightly reduced. We then demonstrated directional fluid pumping within microchannels using cantilever-type micro-check valves made of polyimide. A directional flow rate of nL min(-1) was produced. This cell micropump system could be further developed as a self-actuated and efficient mechanochemical transducer requiring no external energy sources for various purposes in the future.

Animals↗

PubMed2006

Genotype analysis of Candida albicans isolates obtained from different body locations of patients with superficial candidiasis using PCRs targeting 25S rDNA and ALT repeat sequences of the RPS.

BACKGROUND: Several molecular biology-based genotyping techniques have been adapted for studying the molecular characteristics of Candida albicans strains, which constitute the majority of the etiologic agents in candidiasis. Recently, we reported a PCR system targeting 25S rDNA and ALT repeat sequences in the repetitive sequence (RPS) for genotyping of C. albicans. OBJECTIVE: To assess the potential of 25S rDNA and RPS-based genotyping for studying the molecular epidemiology of C. albicans, and define the genotypic relationship of C. albicans between invasive and non-invasive lesions in the same individual. METHODS: C. albicans strains were isolated from infected lesions and commensal sites, such as oral mucosa and/or feces, of patients with superficial candidiasis. The genomic DNAs were amplified by PCRs using P-I and P-II to determine the 25S rDNA- and RPS-based genotypes of the isolates. RESULTS: Genotype A:3 C. albicans constituted the majority of the isolates, followed by A:3/4 and B:3 C. albicans. There was usually one genotype of C. albicans per person. The genotypes of infected lesion isolates and non-infected oral mucosa and/or feces isolates were identical in the same individual, even in serially isolated C. albicans. CONCLUSION: The results indicate that our combined PCR technique using P-I and P-II is a potential tool for molecular typing of C. albicans, and reveal that the genotypes of isolates are identical in the same individual, independent of the infective and non-infective phases or the body location.

Adolescent↗

PubMed2006

Bioengineered cardiac cell sheet grafts have intrinsic angiogenic potential.

Previously, we have demonstrated the long-term survival of myocardial cell sheet constructs in vivo, with microvascular network formation throughout the engineered tissues. The understanding and control of these vascularization processes are a key factor for creating thicker functional tissues. Here, we show that cardiac cell sheets express angiogenesis-related genes and form endothelial cell networks in culture. After non-invasive harvest and stacking of cell sheets using temperature-responsive culture dishes, these endothelial cell networks are maintained and result in neovascularization upon in vivo transplantation. Interestingly, we also discovered that all of the graft vessels are derived from the grafts themselves and these vessels migrate to connect with the host vasculature. Finally, blood vessel formation within the grafts can be controlled by changing the ratio of endothelial cells. In conclusion, myocardial tissue grafts engineered with cell sheet technology have their own inherent potential for the in vivo neovascularization that can be regulated in vitro.

Animals↗

PubMed2006

Demonstration of a PDMS-based bio-microactuator using cultured cardiomyocytes to drive polymer micropillars.

Natural cellular functions are increasingly exploited for integrated chemical systems such as biochemical reactors and biosensors. We propose to utilize the intrinsic mechanical function of cardiomyocytes, converting chemical energy into mechanical energy. In this report, we demonstrate the working principle of our proposed poly(dimethylsiloxane) (PDMS) based cardiomyocyte bio-microactuator using fabricated PDMS micropillars driven to repetitive motion by attached pulsating cardiomyocytes. Sheets of PDMS embedded with an array of micropillars were fabricated and modified for cardiomyocyte attachment in culture. Primary neonatal rat cardiomyocytes were cultured on the array, attaching to the micropillars and substratum successfully, and exhibiting their typical spontaneous, pulsatile phenotype. Micropillars beat with the coupled cells spontaneously without any triggers. The beat frequency was 1.4 Hz at 37 degrees C and the displacement of the top of the pillar that beat most strongly in our observation was 2.8+/-0.2 microm. From this result, contractile forces of cultured cardiomyocytes were estimated to exceed 3.5 microN. The estimated force is far greater than that of a previously described hydrogel-based cardiomyocyte bio-microactuator (K. Morishima et al., in Micro Total Analysis Systems 2003, ed. M. A. Northrup et al., The Transducers Research Foundation, San Diego, CA, vol. 2, pp. 1125-1128). PDMS compatibility as a base material for bio-microactuator design using cultured cardiomyocytes was verified. This PDMS-based cell microactuator worked for about one week without exchange of the culture medium, and this system could be developed for various purposes in the future as self-actuated and efficient mechanochemical transducers without external energy source requirements.

Algorithms↗

PubMed2006

Thermal modulated interaction of aqueous steroids using polymer-grafted capillaries.

Poly(N-isopropylacrylamide) (PIPAAm) of controlled molecular weight was densely grafted onto glass capillary lumenal surfaces using surface-initiated atom transfer radical polymerization (ATRP). Temperature-dependent changes of these thermoresponsive brush surfaces with hydrophobic steroids were investigated by exploiting thermoresponsive aqueous wettability changes of the polymer-modified surfaces in microfluidic systems. IPAAm was polymerized on ATRP initiator-immobilized glass surfaces using CuCl/CuCl(2)/tris(dimethylaminoethyl)amine (Me(6)TREN) as an ATRP catalyst in water at 25 degrees C. PIPAAm graft layer thickness and its homogeneity on glass surfaces are controlled by changing ATRP reaction time. Aqueous wettability changes of PIPAAm-grafted surfaces responses drastically changed to both grafted polymer layer thickness and temperature, especially at lower temperatures. Temperature-responsive surface properties of these PIPAAm brushes within capillary inner wall surfaces were then investigated using capillary chromatography. Effective interaction of hydrophobic steroids with dehydrated, hydrophobized PIPAAm-grafted capillary surfaces was observed above 30 degrees C without any column packing materials. Steroid elution behavior from PIPAAm-grafted capillaries contrasted sharply with that from PIPAAm hydrogel-grafted porous monolithic silica capillaries prepared by electron beam (EB) irradiation wherein significant peak broadening was observed at high-temperature regardless of sample hydrophobicity factors (log P values), indicating multistep separation modes in coated monolithic silica capillaries. In conclusion, thermoresponsive polymer-grafted capillary inner wall surfaces prepared by ATRP exhibit useful temperature-dependent surface property alterations effective to regulate interactions with biomolecules without requirements for separation bed packing materials within the capillary lumen.

Journal Article↗

PubMed2006

Maskless liquid-crystal-display projection photolithography for improved design flexibility of cellular micropatterns.

We previously developed an all-in-one photopolymerization device by modifying a commercially available liquid crystal display projector (LCDP) for the preparation of micropatterned surfaces and microfluidic channels without the need for expensive photomasks. In the present study, we demonstrate a simple and reliable method for rapid prototyping of cell micropatterning with high resolution using the modified LCDP device. Fabrication of complicated and flexible patterns was achieved using this device with positive-type photoresist in a two-step process. First, micropatterns on the silanized coverslips were fabricated from positive photoresist. Second, acrylamide monomer solution containing polymerization initiator was dropped onto the micropatterned positive photoresist and copolymerized on the silanized coverslips in situ by thermally initiated radical polymerization. After the reaction, the remnant micropatterned photoresist is easily dissolved, resulting in a polyacrylamide-silane micropattern on the coverslip. The resultant polyacrylamide layer is highly hydrophilic and repels both protein adsorption and cell adhesion. Cells seeded on the micropatterned surfaces therefore attach and spread only on unpolymerized silanized glass surfaces, conforming to the pattern design. This technique is therefore useful for inexpensive, rapid prototyping of surface micropatterns using polymer materials.

Acrylic Resins↗

PubMed2006

Changes in umbilical arterial blood flow by an intraamniotic distilled water infusion.

OBJECTIVES: The purpose is to investigate how umbilical arterial blood flow changes by an intraamniotic distilled water infusion and to determine whether the changes in umbilical circulation have any relationship with fetal cardiovascular status and osmolality in amniotic fluid and fetal plasma. METHODS: Eleven chronically catheterized pregnant sheep were used in this study. After a 1-hour control period, 1.5 L of warmed sterile distilled water was injected over 10 minutes into the amniotic cavity. Fetal heart rate and carotid arterial pressure, blood flow of the umbilical and fetal carotid arteries were continuously measured. Fetal arterial blood sampled twice during the control period and then at 30, 60, 90, 120, 180, 240, 300, and 360 minutes after the start of the infusion, was analyzed for blood gases, pH, plasma electrolytes, and osmolality. RESULTS: Data obtained from seven sheep with normoxemic fetuses were studied statistically. Umbilical arterial blood flow decreased significantly from 229.5 +/- 3.83 mL/min in the control to 167.4 +/- 11.1 mL/min at 30 minutes after water infusion (P < .001). Umbilical arterial vascular resistance increased rapidly and reached its peak at approximately 60 minutes after infusion and then showed a gradual recovery to the control level (P < .001). Amniotic fluid osmolality had a high degree of correlation with umbilical arterial blood flow and vascular resistance, while fetal arterial blood pressure and heart rate had only little correlation with umbilical blood flow. CONCLUSION: A distilled water infusion into the amniotic cavity in near-term pregnant sheep led to an acute drop in umbilical arterial blood flow. The changes in umbilical flow were closely correlated with those in amniotic fluid osmolality. Hemolysis in the capillary networks in the fetal membranes seems to be one of the main causes of umbilical vasoconstriction. It is speculated that the fetal membranes, including capillary networks, intramembranous pathway, and amnion epithelial cells, sense the changes in amniotic fluid osmolality, which leads to a fetal adaptation to the hypotonic environment.

Amniotic Fluid↗

PubMed2006

Corneal epithelial stem cell delivery using cell sheet engineering: not lost in transplantation.

Cell-based therapies have now generated significant interest as novel drug delivery systems, with various adult cell types used in treating a wide range of diseases. To overcome the limits that restrict treatments for corneal surface dysfunction, corneal epithelial stem cells expanded ex vivo have been applied as an alternative approach. While previous studies used various carrier substrates, we present a novel method using cell sheet engineering with temperature-responsive culture dishes to create carrier-free corneal epithelial stem cell sheets that can be transplanted without sutures. Results from clinical trials reveal successful transplantation with the recovery of lost visual acuity in all cases. Cell sheet engineering, therefore, presents a novel method for the delivery of corneal epithelial stem cells, and can also be applied for other approaches of cellular therapeutics.

Corneal Transplantation↗

PubMed2006

Tissue engineered epithelial cell sheets for the creation of a bioartificial trachea.

To successfully engineer a bioartificial tracheal replacement, it is believed that the regeneration of a functional epithelial lining is a key requirement. In the present study, rabbit tracheal epithelial cells were cultured on temperature-responsive culture dishes, under normal culture conditions at 37 degrees C. By simple temperature reduction to 20 degrees C, the cultured epithelial cells were noninvasively harvested as intact sheets, without the use of any proteolytic enzymes. Support Dacron grafts that had been subcutaneously implanted for 4 weeks to allow for host tissue and vessel infiltration were then opened, and the tracheal epithelial cell sheets were transplanted to the luminal surface without sutures. These fabricated constructs were then used as tracheal replacements, in a rabbit model. Four weeks after transplantation, results showed that the tracheal grafts were covered by a mature, pseudostratified columnar epithelium. In contrast, control constructs that did not receive cell sheet transplantation demonstrated only a thin, immature epithelium at the center of the replacement graft. These results therefore demonstrate that these tracheal epithelial cell sheets can create an epithelial lining on the luminal surface of a bioartificial trachea.

Animals↗