Search PubMed⌕ Search

Biomedical subjects

Adam M Hawkridge

Publications and source records attributed to Adam M Hawkridge.

14 recordsLinked to original sources

Ovarian tumor cells gain competitive advantage by actively reducing the cellular fitness of microenvironment cells.

Cell competition and fitness comparison between cancer and tumor microenvironment (TME) cells determine oncogenic fate. Our previous study established a role for human Flower isoforms as fitness fingerprints, where the expression of Flower Win isoforms in tumor cells leads to growth advantage over TME cells expressing Lose isoforms. Here we demonstrate that the expression of Flower Lose and reduced microenvironment fitness is not a pre-existing condition but, rather, a cancer-induced phenomenon. Cancer cells actively reduce TME fitness by the exosome-mediated release of a cancer-specific long non-coding RNA, Tu-Stroma, which controls the splicing of the Flower gene in the TME cells and expression of Flower Lose isoform, which leads to reduced fitness status. This mechanism controls cancer growth, metastasis and host survival in ovarian cancer. Targeting Flower protein with humanized monoclonal antibody (mAb) in mice significantly reduces cancer growth and metastasis and improves survival. Pre-treatment with Flower mAb protects intraperitoneal organs from developing lesions despite the presence of aggressive tumor cells.

Female↗

Sub parts-per-million mass measurement accuracy of intact proteins and product ions achieved using a dual electrospray ionization quadrupole fourier transform ion cyclotron resonance mass spectrometer.

High mass measurement accuracy (MMA) is demonstrated for intact proteins and subsequent collision-induced dissociation product ions using internal calibration. Internal calibration was accomplished using a dual electrospray ionization source coupled with a hybrid quadrupole Fourier transform ion cyclotron resonance (Q-FT-ICR) mass spectrometer. Initially, analyte ions generated via the first electrospray (ESI) emitter are isolated and dissociated in the external quadrupole. This event is followed by a simultaneous switch to the calibrant ion ESI emitter and a disablement of the isolation and activation of the external quadrupole such that a broad m/z range of calibrant ions are accumulated before injecting the analyte/calibrant ion mixture into the ICR cell. Two different internal calibrant solutions were utilized in these studies to evaluate this approach for the top-down characterization of melittin and ubiquitin. While external calibration of protein fragments resulted in absolute MMA greater than 16 ppm, internal standardization significantly improved upon the MMA of both the intact proteins and their products ions which ranged from -2.0 ppm to 1.1 ppm, with an average of -0.9 ppm. This method requires limited modification to ESI-FT-ICR mass spectrometers and is applicable for both positive and negative ionization modes.

Amino Acid Sequence↗

Generation and detection of multiply-charged peptides and proteins by matrix-assisted laser desorption electrospray ionization (MALDESI) Fourier transform ion cyclotron resonance mass spectrometry.

We report the coupling of a hybrid ionization source, matrix-assisted laser desorption electrospray ionization (MALDESI), to a Fourier transform-ion cyclotron resonance mass spectrometer (FT-ICR MS). The details of the source design and initial data are presented. Analysis of peptides and proteins ranging from 1 to 8.6 kDa resulted in high resolving power single-acquisition FT-ICR mass spectra with average charge-states highly correlated to those obtained by nanoESI, thus, providing strong evidence that the ESI process dictates the observed charge-state distribution. Importantly, unlike the recently introduced electrospray assisted laser desorption ionization (ELDI) source reported by Shiea and coworkers [1, 2], the data we have obtained to date rely on the use of an organic acid matrix. The results presented herein provide insight into the charging mechanism of this emerging ionization approach, while also expanding the utility of FT-ICR MS for top-down protein and complex mixture analysis.

Algorithms↗

Incorporation of 2,6-di(4,4'-dipyridyl)-9-thiabicyclo[3.3.1]nonane into discrete 2D supramolecules via coordination-driven self-assembly.

The synthesis and characterization of three new supramolecular complexes 6-8 (a rhomboid and two hexagons) via coordination-driven self-assembly are reported in excellent yields (>90%). These assemblies have 2,6-di(4,4'-dipyridyl)-9-thiabicyclo[3.3.1]nonane 2 as the bridging tecton. All assemblies were characterized by multinuclear NMR (1H and 31P), mass spectrometry (ESI-MS and ESI-FT-ICR), and elemental analysis. The X-ray structure of the 120 degrees tecton 2 is also discussed.

Bridged Bicyclo Compounds↗

Identification of subunit-subunit interactions in bacteriophage P22 procapsids by chemical cross-linking and mass spectrometry.

Viral capsids are dynamic structures which self-assemble and undergo a series of structural transformations to form infectious viruses. The dsDNA bacteriophage P22 is used as a model system to study the assembly and maturation of icosahedral dsDNA viruses. The P22 procapsid, which is the viral capsid precursor, is assembled from coat protein with the aid of scaffolding protein. Upon DNA packaging, the capsid lattice expands and becomes a stable virion. Chemical cross-linking analyzed by mass spectrometry was used to identify residue specific inter- and intra-subunit interactions in the P22 procapsids. All the intersubunit cross-links occurred between residues clustered in a loop region (residues 157-207) which was previously identified by mass spectrometry based on hydrogen/deuterium exchange and biochemical experiments. DSP and BS3 which have similar distance constraints (12 angstroms and 11.4 angstroms, respectively) cross-linked the same residues between two subunits in the procapsids (K183-K183), whereas DST, a shorter cross-linker, cross-linked lysine 175 in one subunit to lysine 183 in another subunit. The replacement of threonine with a cysteine at residue 182 immediately adjacent to the K183 cross-linking site resulted in slow spontaneous disulfide bond formation in the procapsids without perturbing capsid integrity, thus suggesting flexibility within the loop region and close proximity between neighboring loop regions. To build a detailed structure model, we have predicted the secondary structure elements of the P22 coat protein, and attempted to thread the prediction onto identified helical elements of cryoEM 3D reconstruction. In this model, the loop regions where chemical cross-linkings occurred correspond to the extra density (ED) regions which protrude upward from the outside of the capsids and face one another around the symmetry axes.

Amino Acid Substitution↗

Quantitative mass spectral evidence for the absence of circulating brain natriuretic peptide (BNP-32) in severe human heart failure.

C-terminal brain (B-type) natriuretic peptide (BNP)-32 is a widely used clinical biomarker for the diagnosis, prognosis, and treatment of heart failure (HF). The 32-aa peptide is synthesized primarily in the atrial and ventricular myocardium and constitutes the mature biologically active form of immature BNP (pro-BNP). There has been mounting evidence that suggests BNP circulates in different structural forms that impact HF diagnosis and in vivo activity. Herein, we have developed and used an immunoaffinity purification assay to isolate endogenous BNP-32 from New York Heart Association class IV patient plasma for subsequent analysis by nano-liquid chromatography (LC) electrospray ionization Fourier transform ion cyclotron resonance (FT-ICR) MS. We have introduced stable isotope-labeled BNP-32 to the assayed plasma to enable quantification of endogenous levels of BNP-32. Unlike the chemically nonspecific point-of-care tests (POCTs) and RIAs used worldwide to quantify BNP-32 from plasma, FT-ICR-MS (unprecedented mass measurement accuracy) coupled with LC (retention time) affords extraordinary molecular specificity, and when combined with the use of internal standards is able to confidently identify and quantify BNP-32. The significance of this work is despite exceedingly high circulating levels of BNP-32 in the New York Heart Association class IV patients as determined by POCTs (>290 fmol/ml) nano-LC-electrospray ionization-FT-ICR-MS data did not reveal any endogenous BNP-32. These results provide molecularly specific evidence for the absence of circulating BNP-32 in advanced-stage HF patients and suggest the existence of altered forms of BNP that are contributing to the POCT values.

Chromatography, Liquid↗

Gentle protein ionization assisted by high-velocity gas flow.

Gentle protein electrospray ionization is achieved using the high-velocity gas flow of an air amplifier to improve desolvation in conventional ESI and generate intact folded protein ions in the gas phase. Comparisons are made between the ESI spectra of a number of model proteins, including ubiquitin, cytochrome c, lysozyme, and myoglobin, over a range of pH values under optimized conditions, with and without using an air amplifier to achieve high-velocity gas flow. Previously reported increased ion signals are confirmed. In addition, the peaks recorded using the air amplifier are shown to be narrower, corresponding to more complete desolvation. Significant changes in the charge-state distribution also are observed, with a shift to lower charge state at high-velocity flow. The relationship between the observed charge-state distribution and protein conformation was explored by comparing the charge-state shifts and the distributions of charge states for proteins that are or are not stable in their native conformations in low pH solutions. The data suggest retention of native or nativelike protein conformations using the air amplifier in all cases examined. This is explained by a mechanism in which the air amplifier rapidly creates small droplets from the original large ESI droplets and these microdroplets then desolvate without a significant decrease in pH, resulting in retention of the folded protein conformations. Furthermore, the holoform of ionized myoglobin is visible at pH 3.5, a much lower value than the minimum needed to see this form in conventional ESI. These results provide evidence for the importance of the conditions used in the desolvation process for the preservation of the protein conformation and suggest that the conditions achieved when using high-velocity gas flows to assist droplet evaporation and ion desolvation are much gentler than those in conventional ESI experiments.

Cytochromes c↗

Coordination-driven self-assemblies with a carborane backbone.

The design and self-assembly of five new supramolecular complexes (a rectangle, a triangle, a hexagon, and two squares) are described. These assemblies incorporate carborane building blocks and were prepared in excellent yields (>85%). The assemblies and building blocks were characterized with multinuclear NMR spectroscopy, electrospray ionization mass spectrometry, and elemental analysis. Isotopically resolved mass spectrometry data confirm the existence of the rectangle, triangle, and hexagon, and NMR data are consistent with the formation of all five assemblies. The X-ray structures of two linear carborane building blocks, 1,12-(4-CC(C(5)H(4)N)(2)-p-C(2)B(10)H(10) (1) and 1,12-(trans-(Pt(PEt(3))(2)I)CC)(2)-p-C(2)B(10)H(10) (2), are reported: 1 is monoclinic, P2(1)/c, a = 10.6791(4) A, b = 8.0091(14) A, c = 11.6796(4) A, beta = 107.8461(15) degrees , V = 950.89(5) A(3), Z = 2; 2 is monoclinic, C2/c, a = 62.1128(10) A, b = 22.0071(3) A, c = 14.0494(2) A, beta = 89.9411(8) degrees , V = 19204.4(5) A(3), Z = 16. Crystals of the linear linker 1 exhibit close pi-pi pyridine and pyridine-B(carborane) interactions, which are discussed.

Boranes↗

Effect of post-excitation radius on ion abundance, mass measurement accuracy, and isotopic distributions in Fourier transform ion cyclotron resonance mass spectrometry.

We report an evaluation of a modern Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) instrument to determine the general trend of post-excitation radius on total ion abundance, mass measurement accuracy, and isotopic distributions for internally calibrated mass spectra. The optimum post-excitation radius was determined using total ion abundance, mass measurement accuracy (MMA), and isotope ratios. However, despite the utility of internal calibration for achieving ultimate MMA, the internal calibrant ions were insufficient for compensating for sub-optimum ICR cell conditions. The findings presented herein underscore the importance of determining the optimal post-excitation radius in FT-ICR-MS to achieve high ion abundance (low limits of detection), high MMA, and valid isotopic distributions.

Bradykinin↗

Analytical performance of a venturi device integrated into an electrospray ionization fourier transform ion cyclotron resonance mass spectrometer for analysis of nucleic acids.

A voltage-assisted venturi device modeled after an industrial air amplifier was used to improve the ion transmission efficiency of a 16.2 kDa oligonucleotide and a 53-mer PCR product in the high-pressure region between an electrospray ionization (ESI) emitter and the sampling orifices of two Fourier transform ion cyclotron resonance mass spectrometers (FT-ICR-MS). The venturi device increased the total ion abundance of the oligonucleotide and the PCR product by more than 6-fold relative to the best achievable signal without the device. Furthermore, the average charge states of the oligonucleotide and PCR product shifted from 12.5- to 14.5- and 10.9- to 12.6-, respectively, with the addition of the venturi device. Specific to FT-ICR mass spectrometry, this increase in the charge state directly translates to an increase in theoretical mass resolving power (>10000 full width half-maximum for the results presented here at 7 T). Adduction was still observed while using the device, suggesting that it is "soft" relative to other high-pressure ion focusing methods.

Cyclotrons↗

Model aluminum-poly(p-phenylenevinylene) interfaces studied by surface raman spectroscopy.

Polymeric organic light-emitting diodes (OLEDs) have emerged as inexpensive and versatile alternatives to traditional inorganic-based display technologies. Further advances in this field depend on extending device lifetimes and improving electroluminescence efficiencies, both of which are strongly coupled to the integrity of the electrode/organic contacts. Therefore, the deposition of low-work function metals on organic materials has been extensively studied by X-ray photoelectron spectroscopy (XPS), ultraviolet photoemission spectroscopy (UPS), and near-edge X-ray adsorption fine structure (NEXAFS) to ascertain information about the chemical and electronic states within the interfacial region. However, to date, the only molecular structural information about metal-organic species formed in these regions has come from fits of theoretical models to existing XPS and UPS data. Very little direct structural information exists about the potential multitude of metal-organic species formed during cathode deposition. We report the use of surface Raman spectroscopy to study the interactions between aluminum and trans-stilbene, a model for poly(p-phenylenevinylene) (PPV). The Raman spectral data suggest preferential formation of covalent Al-C bonds at the vinylene carbons as opposed to the phenyl carbons of PPV.

Journal Article↗

Evaluation of matrix-assisted laser desorption ionization mass spectrometry for studying the sec-butyllithium and n-butyllithium initiated ring-opening polymerization of hexamethylcyclotrisiloxane (D3).

Matrix assisted laser desorption ionization (MALDI) was used to study the organolithium initiated ring-opening polymerization of hexamethylcyclotrisiloxane (D3) in a mixed solvent system. The mass spectral peak intensities were monitored to determine the effects of polymerization time, initiator concentration, and reaction temperature on the formation of the mono, di, and trisiloxanolate initiator species and the extent of chain redistribution. The three initiator species were formed by reacting n-butyllithium and sec-butyllithium with D3 in nonpolar solvent. The mass spectral results showed that sec-butyllithium and n-butyllithium form different populations of initiator species under the same conditions and that the measured mass spectral peak intensities do not accurately represent the population of siloxanolate initiator species prior to propagation. The changes in peak intensities were attributed to chain redistribution.

Journal Article↗