Search PubMed⌕ Search

Biomedical subjects

A Svendsen

Publications and source records attributed to A Svendsen.

At least 19 recordsLinked to original sources

Phospholipases and their industrial applications.

Phospholipids are present in all living organisms. They are a major component of all biological membranes, along with glycolipids and cholesterol. Enzymes aimed at modifying phospholipids, namely, phospholipases, are consequently widespread in nature, playing very diverse roles from aggression in snake venom to signal transduction and digestion in humans. In this review, we give a general overview of phospholipases A1, A2, C and D from a sequence and structural perspective and their industrial application. The use of phospholipases in industrial processes has grown hand-in-hand with our ability to clone and express the genes in microbial hosts with commercially attractive amounts. Further, the use in industrial processes is increasing by optimizing the enzymes by protein engineering. Here, we give a perspective on the work done to date to express phospholipases in heterologous hosts and the efforts to optimize them by protein engineering. We will draw attention to the industrial processes where phospholipases play a key role and show how the use of a phospholipase for oil degumming leads to substantial environmental benefits. This illustrates a very general trend: the use of enzymes as an alternative to chemical processes to make products often provides a cleaner solution for the industrial processes. In a world with great demands on non-polluting, energy saving technical solutions--white biotechnology is a strong alternative.

Animals↗

Molecular size effect in NCO and NCS dianion resonances.

Cross sections for electron-impact detachment and electron-impact dissociation of NCO- and NCS- were measured from about 3 to about 40 eV. The former are found to follow a classical prediction with a threshold energy of 9.1 +/- 0.1 eV for NCO- and 8.9 +/- 0.2 eV for NCS-. When the incoming electron binds to the monoanion, a short-lived dianion complex is formed, which is revealed as a resonance in the cross section. For NCO- a resonance is evident at 9.3 +/- 0.2 eV, which implies that the dianion lies above the monoanion by this amount of energy. In the case of NCS- two resonances are evident at 8.4 +/- 0.2 and 19.0 +/- 0.5 eV, respectively. The low-energy NCS dianion is less unstable than the dianion of NCO, which in turn is less unstable than the CN dianion (10-eV resonance). Thus the resonance shifts down in energy with the increasing size of the anion, a fact which is attributed to a decrease in Coulomb energy between the spatially separated electrons.

Journal Article↗

Tuning the continuum ground state energy of NO2- 2 by water molecules.

Electron scattering on NO-2, NO-2 x (H2O), and NO-2 x (H2O)(2) was performed in two storage rings. We confirm the presence of earlier reported NO2-2 dianion resonances and show that they remain when water is attached. Importantly, hydration tunes the energy: each water molecule lowers the ground state energy by 0.8 +/- 0.3 eV relative to the monoanion. NO2-2 is observed to decay by two-electron emission, possibly in combination with fragmentation. NO(2-)2 x (H2O) mainly decays into NO-2 + H2O + e(-).

Journal Article↗

Electron scattering on centrosymmetric molecular dianions Pt(CN)4(2-) and Pt(CN)6(2-).

Electron scattering on stored Pt(CN)2-4 and Pt(CN)2-6 centrosymmetric molecular dianions has been performed at the electrostatic storage ring ELISA. The thresholds for production of neutral particles by electron bombardment were found to be 17.2 and 18.7 eV, respectively. The relatively high thresholds reflect the strong Coulomb repulsion in the incoming channel as well as a high energetic stability of the target electrons. A trianion resonance was identified with a positive energy of 17.0 eV for the Pt(CN)2-4 square-planar complex, while three trianion resonances were identified for the Pt(CN)2-6 octahedral complex with positive energies of 15.3, 18.1, and 20.1 eV.

Journal Article↗

Electron scattering on OH-(H2O)n clusters (n = 0-4).

The cross sections for electron scattering on OH-(H2O)n for n = 0-4 were measured from threshold to approximately 50 eV. All detachment cross sections were found to follow the classical prediction given earlier [Phys. Rev. Lett. 74, 892 (1995)] with a threshold energy for electron-impact detachment that increased upon sequential hydration, yielding values in the range from 4.5 eV +/- 0.2 eV for OH- to 12.10 eV +/- 0.5 eV for OH-(H2O)4. For n > or = 1, we found that approximately 80% of the total reaction events lead to electron detachment plus total dissociation of the clusters into the constituent molecules of OH and H2O. Finally, we observed resonances in the cross sections for OH-(H2O)3 and for OH-(H2O)4. The resonances were located at approximately 15 eV and were ascribed to the formation of dianions in excited states.

Journal Article↗

Surface fluorescence resonance energy transfer studies on interfacial adsorption of Thermomyces (humicola) lanuginosa lipase, using monomolecular films of cis-parinaric acid.

The fluorescence resonance energy transfer (FRET) technique was adapted to study the process whereby lipase is adsorbed to monomolecular lipid films spread at the air-water interface. When cis-parinaric acid (cis-PnA) was spread over an aqueous subphase before the injection of sodium taurodeoxycholate (NaTDC) and Thermomyces lanuginosa lipase (TLL), no FRET was observed. Under these conditions, no adsorption of TLL was detected using an ELISA. In contrast, FRET occurred when cis-PnA was spread over an aqueous subphase containing NaTDC and TLL. The FRET signals observed were attributed to the interactions between the adsorbed TLL and the cis-PnA monomolecular films. Comparisons between the fluorescence emission spectra corresponding to the bulk phase and the aspirated film, in the presence and absence of TLL, showed that cis-PnA was undetectable in the bulk phase. We concluded that the FRET originated from the interface and not from the bulk phase. Using surface FRET, we estimated that the surface excess of the catalytically inactive mutant, TLL(S146A), was 1.6 higher than that present in the wild-type TLL. This finding is in agreement with independent measurements of the surface excess of TLL and TLL(S146A) on monomolecular films of cis-PnA.

Adsorption↗

Impact of the tryptophan residues of Humicola lanuginosa lipase on its thermal stability.

Thermal stability of wild type Humicola lanuginosa lipase (wt HLL) and its two mutants, W89L and the single Trp mutant W89m (W117F, W221H, and W260H), were compared. Differential scanning calorimetry revealed unfolding of HLL at T(d)=74.4 degrees C whereas for W89L and W89m this endotherm was decreased to 68.6 and 62 degrees C, respectively, demonstrating significant contribution of the above Trp residues to the structural stability of HLL. Fluorescence emission spectra revealed the average microenvironment of Trps of wt HLL and W89L to become more hydrophilic at elevated temperatures whereas the opposite was true for W89m. These changes in steady-state emission were sharp, with midpoints (T(m)) at approx. 70.5, 61.0, and 65.5 degrees C for wt HLL, W89L, and W89m, respectively. Both steady-state and time resolved fluorescence spectroscopy further indicated that upon increasing temperature, the local movements of tryptophan(s) in these lipases were first attenuated. However, faster mobilities became evident when the unfolding temperatures (T(m)) were exceeded, and the lipases became less compact as indicated by the increased hydrodynamic radii. Even at high temperatures (up to 85 degrees C) a significant extent of tertiary and secondary structure was revealed by circular dichroism. Activity measurements are in agreement with increased amplitudes of conformational fluctuations of HLL with temperature. Our results also indicate that the thermal unfolding of these lipases is not a two-state process but involves intermediate states. Interestingly, a heating and cooling cycle enhanced the activity of the lipases, suggesting the protein to be trapped in an intermediate, higher energy state. The present data show that the mutations, especially W89L in the lid, contribute significantly to the stability, structure and activity of HLL.

Bacteria↗

Biochemical characterization of ochratoxin A-producing strains of the genus Penicillium.

In order to explore the biochemical scope of ochratoxin A-producing penicillia, we screened 48 Penicillium verrucosum isolates for the production of secondary metabolites. Fungal metabolites were analyzed by high-pressure liquid or gas chromatography coupled to diode array detection or mass spectrometry. The following metabolites were identified: ochratoxins A and B, citrinin, verrucolones, verrucines, anacines, sclerotigenin, lumpidin, fumiquinazolines, alantrypinones, daldinin D, dipodazine, penigequinolines A and B, 2-pentanone, and 2-methyl-isoborneol. By use of average linking clustering based on binary (nonvolatile) metabolite data, the 48 isolates could be grouped into two large and clearly separated groups and a small outlying group of four non-ochratoxin-producing isolates. The largest group, containing 24 isolates, mainly originating from plant sources, included the type culture of P. verrucosum. These isolates produced ochratoxin A, verrucolones, citrinin, and verrucines and had a characteristic dark brown reverse color on yeast extract-sucrose agar medium. Almost all of a group of 20 isolates mainly originating from cheese and meat products had a pale cream reverse color on yeast extract-sucrose agar medium and produced ochratoxin A, verrucolones, anacines, and sclerotigenin. This group included the former type culture of P. nordicum. We also found that P. verrucosum isolates and three P. nordicum isolates incorporated phenylalanine into verrucine and lumpidin metabolites, a finding which could explain why those isolates produced relatively lower levels of ochratoxins than did most isolates of P. nordicum.

Chromatography, Gas↗

Structural origins of the interfacial activation in Thermomyces (Humicola) lanuginosa lipase.

The already known X-ray structures of lipases provide little evidence about initial, discrete structural steps occurring in the first phases of their activation in the presence of lipids (process referred to as interfacial activation). To address this problem, five new Thermomyces (formerly Humicola) lanuginosa lipase (TlL) crystal structures have been solved and compared with four previously reported structures of this enzyme. The bias coming from different crystallization media has been minimized by the growth of all crystals under the same crystallization conditions, in the presence of detergent/lipid analogues, with low or high ionic strength as the only main variable. Resulting structures and their characteristic features allowed the identification of three structurally distinct species of this enzyme: low activity form (LA), activated form (A), and fully Active (FA) form. The isomerization of the Cys268-Cys22 disulfide, synchronized with the formation of a new, short alpha(0) helix and flipping of the Arg84 (Arginine switch) located in the lid's proximal hinge, have been postulated as the key, structural factors of the initial transitions between LA and A forms. The experimental results were supplemented by theoretical calculations. The magnitude of the activation barrier between LA (ground state) and A (end state) forms of TlL (10.6 kcal/mol) is comparable to the enthalpic barriers typical for ring flips and disulfide isomerizations at ambient temperatures. This suggests that the sequence of the structural changes, as exemplified in various TlL crystal structures, mirror those that may occur during interfacial activation.

Crystallography, X-Ray↗

Structural analysis of a chimeric bacterial alpha-amylase. High-resolution analysis of native and ligand complexes.

Several chimeric alpha-amylases genes were constructed by an in vivo recombination technique from the Bacillus amyloliquefaciens and Bacillus licheniformis genes. One of the fusion amylases (hereafter BA2), consisting of residues 1-300 from B. amyloliquefaciens and 301-483 from B. licheniformis, has been extensively studied by X-ray crystallography at resolutions between 2.2 and 1.7 A. The 3-dimensional structure of the native enzyme was solved by multiple isomorphous replacement, and refined at a resolution of 1.7 A. It consists of 483 amino acids, organized similarly to the known B. lichiniformis alpha-amylase structure [Machius et al. (1995) J. Mol. Biol. 246, 545-559], but features 4 bound calcium ions. Two of these form part of a linear cluster of three ions, the central ion being attributed to sodium. This cluster lies at the junction of the A and B domains with one calcium of the cluster structurally equivalent to the major Ca(2+) binding site of fungal alpha-amylases. The third calcium ion is found at the interface of the A and C domains. BA2 contains a fourth calcium site, not observed in the B. licheniformis alpha-amylase structure. It is found on the C domain where it bridges the two beta-sheets. Three acid residues (Glu261, Asp328, and Asp231) form an active site similar to that seen in other amylases. In the presence of TRIS buffer, a single molecule of TRIS occupies the -1 subsite of the enzyme where it is coordinated by the three active-center carboxylates. Kinetic data reveal that BA2 displays properties intermediate to those of its parents. Data for crystals soaked in maltooligosaccharides reveal the presence of a maltotriose binding site on the N-terminal face of the (beta/alpha)(8) barrel of the molecule, not previously described for any alpha-amylase structure, the biological function of which is unclear. Data for a complex soaked with the tetrasaccharide inhibitor acarbose, at 1.9 A, reveal a decasaccharide moiety, spanning the -7 to +3 subsites of the enzyme. The unambiguous presence of three unsaturated rings in the (2)H(3) half-chair/(2)E envelope conformation, adjacent to three 6-deoxypyranose units, clearly demonstrates synthesis of this acarbose-derived decasaccharide by a two-step transglycosylation mechanism.

Acarbose↗

Interfacial control of lid opening in Thermomyces lanuginosa lipase.

Small unilamelar vesicles of anionic phospholipids (SUV), such as 1-palmitoyl-2-oleoylglycero-sn-3-phosphoglycerol (POPG), provide an interface where Thermomyces lanuginosa triglyceride lipase (TlL) binds and adopts a catalytically active conformation for the hydrolysis of substrate partitioned in the interface, such as tributyrin or p-nitrophenylbutyrate, with an increase in catalytic rate of more than 100-fold for the same concentration of substrate [Berg et al. (1998) Biochemistry 37, 6615-6627.]. This interfacial activation is not seen with large unilamelar vesicles (LUV) of the same composition, or with vesicles of zwitterionic phospholipids such as 1-palmitoyl-2-oleoylglycero-sn-3-phosphocholine (POPC), independently of the vesicle size. Tryptophan fluorescence experiments show that lipase binds to all those types of vesicles with similar affinity, but it adopts different forms that can be correlated with the enzyme catalytic activity. The spectral change on binding to anionic SUV corresponds to the catalytically active, or "open" form of the enzyme, and it is not modified in the presence of substrate partitioned in the vesicles, as demonstrated with inactive mutants. This indicates that the displacement of the lid characteristic of lipase interfacial activation is induced by the anionic phospholipid interface without blocking the accessibility of the active site to the substrate. Experiments with a mutant containing only Trp89 in the lid show that most of the spectral changes on binding to POPG-SUVs take place in the lid region that covers the active site; an increase in Trp anisotropy indicates that the lid becomes less flexible in the active form, and quenching experiments show that it is significantly buried from the aqueous phase. On the other hand, results with a mutant where Trp89 is changed to Leu show that the environment of the structural tryptophans in positions 117, 221, and 260 is somehow altered on binding, although their mobility and solvent accessibility remains the same as in the inactive form in solution. The form of TlL bound to POPC-SUV or -LUV vesicles as well as to LUV vesicles of POPG has the same spectral signatures and corresponds to an inactive or "closed" form of the enzyme. In these interfaces, the lid is highly flexible, and Trp89 remains accessible to solvent. Resonance energy transfer experiments show that the orientation of TlL in the interface is different in the active and inactive forms. A model of interaction consistent with these data and the available X-ray structures is proposed. This is a unique system where the composition and physical properties of the lipid interface control the enzyme activity.

Binding Sites↗

Detergent-induced conformational changes of Humicola lanuginosa lipase studied by fluorescence spectroscopy.

Detergent (pentaoxyethylene octyl ether, C(8)E(5))-induced conformational changes of Humicola lanuginosa lipase (HLL) were investigated by stationary and time-resolved fluorescence intensity and anisotropy measurements. Activation of HLL is characterized by opening of a surface loop (the "lid") residing directly over the enzyme active site. The interaction of HLL with C(8)E(5) increases fluorescence intensities, prolongs fluorescence lifetimes, and decreases the values of steady-state anisotropy, residual anisotropy, and the short rotational correlation time. Based on these data, we propose the following model. Already below critical micellar concentration (CMC) the detergent can intercalate into the active site accommodating cleft, while the lid remains closed. Occupation of the cleft by C(8)E(5) also blocks the entry of the monomeric substrate, and inhibition of catalytic activity at [C(8)E(5)] less than or equal to CMC is evident. At a threshold concentration close to CMC the cooperativity of the hydrophobicity-driven binding of C(8)E(5) to the lipase increases because of an increase in the number of C(8)E(5) molecules present in the premicellar nucleates on the hydrophobic surface of HLL. These aggregates contacting the lipase should have long enough residence times to allow the lid to open completely and expose the hydrophobic cleft. Concomitantly, the cleft becomes filled with C(8)E(5) and the "open" conformation of HLL becomes stable.

Binding Sites↗

Effect of the lipid interface on the catalytic activity and spectroscopic properties of a fungal lipase.

Lipase from the fungi Thermomyces (formerly Humicola) lanuginosa (TlL) is widely used in industry. This interfacial enzyme is inactive under aqueous conditions, but catalytic activation is induced on binding to a lipid-water interface. In order for protein engineering to design more efficient mutants of TlL for specific applications, it is important to characterize its interfacial catalysis. A complete analysis of steady-state kinetics for the hydrolysis of a soluble substrate by TlL has been developed using an interface different from the substrate. Small vesicles of 1-palmitoyl-2-oleoylglycero-sn-3-phosphoglycerol (POPG) or other anionic phospholipids are a neutral diluent interface for the partitioning of substrate and enzyme. TlL binds to these interfaces in an active or open form, thus implying a displacement of the helical lid away from the active site. A study of the influence of substrate and diluent concentration dependence of the rate of hydrolysis provides a basis for the determination of the primary interfacial catalytic parameters. The interfacial activation is not supported by zwitterionic vesicles or by large anionic vesicles of 100 nm diameter, although TlL binds to these interfaces. Using a combination of fluorescence-based techniques applied to several mutants of TlL with different tryptophan residues we have shown that TlL binds to phospholipid vesicles in different forms rendering different catalytic activities, and that the open lid conformation is achieved and stabilized by a combination of electrostatic and hydrophobic interactions between the enzyme's lipid-binding face and the interface.

Ascomycota↗

Conversion of the maltogenic alpha-amylase Novamyl into a CGTase.

Novamyl is a thermostable five-domain maltogenic alpha-amylase that shows sequence and structural homology with the cyclodextrin glycosyltransferases (CGTases). Comparing X-ray crystal structures of Novamyl and CGTases, two major differences in the active site cleft were observed: Novamyl contains a loop insertion consisting of five residues (residues 191-195) and the location of an aromatic residue known to be essential to obtain an efficient cyclization reaction. To convert Novamyl into a cyclodextrin (CD)-producing enzyme, the loop was deleted and two substitutions, F188L and T189Y, were introduced. Unlike the parent Novamyl, the obtained variant is able to produce beta-CD and showed an overall conversion of starch to CD of 9%, compared with CGTases which are able to convert up to 40%. The lower conversion compared with the CGTase is probably due to additional differences in the active site cleft and in the starch-binding E domain. A variant with only the five-residue loop deleted was not able to form beta-CD.

Amino Acid Sequence↗

Directed evolution of a fungal peroxidase.

The Coprinus cinereus (CiP) heme peroxidase was subjected to multiple rounds of directed evolution in an effort to produce a mutant suitable for use as a dye-transfer inhibitor in laundry detergent. The wild-type peroxidase is rapidly inactivated under laundry conditions due to the high pH (10.5), high temperature (50 degrees C), and high peroxide concentration (5-10 mM). Peroxidase mutants were initially generated using two parallel approaches: site-directed mutagenesis based on structure-function considerations, and error-prone PCR to create random mutations. Mutants were expressed in Saccharomyces cerevisiae and screened for improved stability by measuring residual activity after incubation under conditions mimicking those in a washing machine. Manually combining mutations from the site-directed and random approaches led to a mutant with 110 times the thermal stability and 2.8 times the oxidative stability of wild-type CiP. In the final two rounds, mutants were randomly recombined by using the efficient yeast homologous recombination system to shuffle point mutations among a large number of parents. This in vivo shuffling led to the most dramatic improvements in oxidative stability, yielding a mutant with 174 times the thermal stability and 100 times the oxidative stability of wild-type CiP.

Coprinus↗

Electrostatics in the active site of an alpha-amylase.

The importance of electrostatics in catalysis has been emphasized in the literature for a large number of enzymes. We examined this hypothesis for the Bacillus licheniformis alpha-amylase by constructing site-directed mutants that were predicted to change the pKa values of the catalytic residues and thus change the pH-activity profile of the enzyme. To change the pKa of the catalytic residues in the active site, we constructed mutations that altered the hydrogen bonding network, mutations that changed the solvent accessibility, and mutations that altered the net charge of the molecule. The results show that changing the hydrogen bonding network near an active site residue or changing the solvent accessibility of an active site residue will very likely result in an enzyme with drastically reduced activity. The differences in the pH-activity profiles for these mutants were modest. pH-activity profiles of mutants which change the net charge on the molecule were significantly different from the wild-type pH-activity profile. The differences were, however, difficult to correlate with the electrostatic field changes calculated. In several cases we observed that pH-activity profiles shifted in the opposite direction compared to the shift predicted from electrostatic calculations. This strongly suggests that electrostatic effects cannot be solely responsible for the pH-activity profile of the B. licheniformis alpha-amylase.

Bacillus↗

Analysis of the dynamics of rhizomucor miehei lipase at different temperatures.

The dynamics of Rhizomucor miehei lipase has been studied by molecular dynamics simulations at temperatures ranging from 200-500K. Simulations carried out in periodic boundary conditions and using explicit water molecules were performed for 400 ps at each temperature. Our results indicate that conformational changes and internal motions in the protein are significantly influenced by the temperature increase. With increasing temperature, the number of internal hydrogen bonds decreases, while surface accessibility, radius of gyration and the number of residues in random coil conformation increase. In the temperature range studied, the motions can be described in a low dimensional subspace, whose dimensionality decreases with increasing temperature. Approximately 80% of the total motion is described by the first (i) 80 eigenvectors at T=200K, (ii) 30 eigenvectors at T=300K and (iii) 10 eigenvectors at T=400K. At high temperature, the alpha-helix covering the active site in the native Rhizomucor miehei lipase, the helix at which end the active site is located, and in particular, the loop (Gly35-Lys50) show extensive flexibility.

Lipase↗