Small is beautiful: protein micro-crystallography.
Explore the source record for details and available documents.
Animals↗
Biomedical subjects
A Perrakis
Publications and source records attributed to A Perrakis.
Crystal structure of the specific DNA-binding domain of Tc3 transposase of C.elegans in complex with transposon DNA.
The crystal structure of the complex between the N-terminal DNA-binding domain of Tc3 transposase and an oligomer of transposon DNA has been determined. The specific DNA-binding domain contains three alpha-helices, of which two form a helix-turn-helix (HTH) motif. The recognition of transposon DNA by the transposase is mediated through base-specific contacts and complementarity between protein and sequence-dependent deformations of the DNA. The HTH motif makes four base-specific contacts with the major groove, and the N-terminus makes three base-specific contacts with the minor groove. The DNA oligomer adopts a non-linear B-DNA conformation, made possible by a stretch of seven G:C base pairs at one end and a TATA sequence towards the other end. Extensive contacts (seven salt bridges and 16 hydrogen bonds) of the protein with the DNA backbone allow the protein to probe and recognize the sequence-dependent DNA deformation. The DNA-binding domain forms a dimer in the crystals. Each monomer binds a separate transposon end, implying that the dimer plays a role in synapsis, necessary for the simultaneous cleavage of both transposon termini.
Amino Acid Sequence↗
Crystal structure of murine/human Ubc9 provides insight into the variability of the ubiquitin-conjugating system.
Murine/human ubiquitin-conjugating enzyme Ubc9 is a functional homolog of Saccharomyces cerevisiae Ubc9 that is essential for the viability of yeast cells with a specific role in the G2-M transition of the cell cycle. The structure of recombinant mammalian Ubc9 has been determined from two crystal forms at 2.0 A resolution. Like Arabidopsis thaliana Ubc1 and S. cerevisiae Ubc4, murine/human Ubc9 was crystallized as a monomer, suggesting that previously reported hetero- and homo-interactions among Ubcs may be relatively weak or indirect. Compared with the known crystal structures of Ubc1 and Ubc4, which regulate different cellular processes, Ubc9 has a 5-residue insertion that forms a very exposed tight beta-hairpin and a 2-residue insertion that forms a bulge in a loop close to the active site. Mammalian Ubc9 also possesses a distinct electrostatic potential distribution that may provide possible clues to its remarkable ability to interact with other proteins. The 2-residue insertion and other sequence and structural heterogeneity observed at the catalytic site suggest that different Ubcs may utilize catalytic mechanisms of varying efficiency and substrate specificity.
Amino Acid Sequence↗
wARP: improvement and extension of crystallographic phases by weighted averaging of multiple-refined dummy atomic models.
wARP is a procedure that substantially improves crystallographic phases (and subsequently electron-density maps) as an additional step after density-modification methods such as solvent flattening and averaging. The initial phase set is used to create a number of dummy atom models which are subjected to least-squares or maximum-likelihood refinement and iterative model updating in an automated refinement procedure (ARP). Averaging of the phase sets calculated from the refined output models and weighting of structure factors by their similarity to an average vector results in a phase set that improves and extends the initial phases substantially. An important requirement is that the native data have a maximum resolution beyond approximately 2.4 A. The wARP procedure shortens the time-consuming step of model building in crystallographic structure determination and helps to prevent the introduction of errors.
Journal Article↗
Evolution of immunoglobulin-like modules in chitinases: their structural flexibility and functional implications.
BACKGROUND: Chitinase A from Serratia marcescens is a glycosyl hydrolase consisting of three distinct domains. The N-terminal domain (ChiN domain, amino acids 24-137) has an immunoglobulin-like fold. This ChiN domain is structurally similar to fibronectin type III domains (FnIII domains), which exist in other chitinases, but does not share any sequence similarity with them. RESULT: Structure comparisons of the ChiN domain and FnIII domains confirm the similar fold, but fail to establish any sequence similarity. Sequence searches and comparisons between ChiN and FnIII domain sequences show a remarkable difference between the two domains in chitinases from an evolutionary point of view. A low temperature structure of chitinase A shows that the ChiN module is flexible with respect to the catalytic body of the protein. CONCLUSIONS: We postulate that the ChiN and FnIII domains evolved independently in chitinases which share otherwise homologous catalytic domains. The flexibility of the ChiN domain, together with biochemical knowledge of the function of similar domains, leads us to propose that immunoglobulin-like folds in chitinases are involved in interactions with the chitin chain during catalysis.
Bacterial Proteins↗
Structure-function studies on the chitinolytic enzymes of Serratia marcescens chitinase and chitobiase.
Explore the source record for details and available documents.
Acetylglucosaminidase↗
Crystal structure of UDP-N-acetylglucosamine enolpyruvyltransferase, the target of the antibiotic fosfomycin.
BACKGROUND: The ever increasing number of antibiotic resistant bacteria has fuelled interest in the development of new antibiotics and other antibacterial agents. The major structural element of the bacterial cell wall is the heteropolymer peptidoglycan and the enzymes of peptidoglycan biosynthesis are potential targets for antibacterial agents. One such enzyme is UDP-N-acetylglucosamine enolpyruvyltransferase (EPT) which catalyzes the first committed step in peptidoglycan biosynthesis: the transfer of the enolpyruvyl moiety of phosphoenolpyruvate (PEP) to the 3-hydroxyl of UDP-N-acetylglucosamine (UDPGlcNAc). EPT is of potential pharmaceutical interest because it is inhibited by the broad spectrum antibiotic fosfomycin. RESULTS: The crystal structure of substrate-free EPT has been determined at 2.0 A resolution. The structure reveals a two-domain protein with an unusual fold (inside out alpha/beta barrel) which is built up from the sixfold repetition of one folding unit. The only repetitive element in the amino acid sequence is a short motif, Leu-X3-Gly(Ala), which is responsible for the formation of hydrogen-bond interactions between the folding units. An enzyme which catalyzes a similar reaction to EPT, 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS), has a very similar structure despite an amino acid sequence identity of only 25%. To date, only these two enzymes appear to display this characteristic fold. CONCLUSIONS: The present structure reflects the open conformation of the enzyme which is probably stabilized through two residues, a lysine and an arginine, located in the cleft between the domains. Binding of the negatively charged UDPGlcNAc to these residues could neutralize the repulsive force between the two domains, thereby allowing the movement of a catalytically active cysteine residue towards the cleft.
Alkyl and Aryl Transferases↗
Crystal structure of bacteriophage T4 deoxynucleotide kinase with its substrates dGMP and ATP.
NMP kinases catalyse the phosphorylation of the canonical nucleotides to the corresponding diphosphates using ATP as a phosphate donor. Bacteriophage T4 deoxynucleotide kinase (DNK) is the only member of this family of enzymes that recognizes three structurally dissimilar nucleotides: dGMP, dTMP and 5-hydroxymethyl-dCMP while excluding dCMP and dAMP. The crystal structure of DNK with its substrate dGMP has been determined at 2.0 A resolution by single isomorphous replacement. The structure of the ternary complex with dGMP and ATP has been determined at 2.2 A resolution. The polypeptide chain of DNK is folded into two domains of equal size, one of which resembles the mononucleotide binding motif with the glycine-rich P-loop. The second domain, consisting of five alpha-helices, forms the NMP binding pocket. A hinge connection between the domains allows for large movements upon substrate binding which are not restricted by dimerization of the enzyme. The mechanism of active centre formation via domain closure is described. Comparison with other P-loop-containing proteins indicates an induced-fit mode of NTP binding. Protein-substrate interactions observed at the NMP and NTP sites provide the basis for understanding the principles of nucleotide discrimination.
Adenosine Triphosphate↗
Bacterial chitobiase structure provides insight into catalytic mechanism and the basis of Tay-Sachs disease.
Chitin, the second most abundant polysaccharide on earth, is degraded by chitinases and chitobiases. The structure of Serratia marcescens chitobiase has been refined at 1.9 A resolution. The mature protein is folded into four domains and its active site is situated at the C-terminal end of the central (beta alpha)8-barrel. Based on the structure of the complex with the substrate disaccharide chitobiose, we propose an acid-base reaction mechanism, in which only one protein carboxylate acts as catalytic acid, while the nucleophile is the polar acetamido group of the sugar in a substrate-assisted reaction. The structural data lead to the hypothesis that the reaction proceeds with retention of anomeric configuration. The structure allows us to model the catalytic domain of the homologous hexosaminidases to give a structural rationale to pathogenic mutations that underlie Tay-Sachs and Sandhoff disease.
Acetylglucosaminidase↗
PBM: a software package to create, display and manipulate interactively models of small molecules and proteins on IBM-compatible PCs.
The PBM package was developed to create, display and conveniently manipulate protein and small molecule structures on IBM-compatible microcomputers. It consists of four modules: CREATE, SPHERE, RIBBON and CONVERT. CREATE includes commands to create or alter ('mutate') the primary and subsequently the tertiary structure of a given peptide or protein by defining phi and psi angles of residues at will, options to add, delete or alter atoms in a structure, utilities to choose easily between the most common rotamers of amino acid residue sidechains and options to analyse in various ways a protein conformation. SPHERE provides for an interactive manipulation of structures containing up to 2700 atoms which can belong up to six different molecules. All manipulations can be made with the use of an ordinary mouse, by choosing from a variety of pull-down menus. Three types of models can be implemented to display molecules on the computer screen or the plotter: skeletal, solid space-filling and wireframe space-filling models. RIBBON creates ribbon models of proteins and allows for a limited variety of interactive manipulations. CONVERT is a file converter, which is capable of converting files of atom coordinates of literally any format to Brookhaven Data Bank format files. The package produces very good results for protein molecules of reasonable sizes, both in terms of graphics quality and speed of operations, on an 80486 IBM PC-compatible machine equipped with a 1 MByte VGA display card and a colour VGA monitor, which is a recommended configuration.
Computer Graphics↗
Crystal structure of a bacterial chitinase at 2.3 A resolution.
BACKGROUND: Chitinases cleave the beta-1-4-glycosidic bond between the N-acetyl-D-glucosamine units of which chitin is comprised. Chitinases are present in plants, bacteria and fungi, but whereas structures are available for two prototypic plant enzymes, no structure is available for a bacterial or fungal chitinase. RESULTS: To redress this imbalance, the structure of native chitinase A from Serratia marcescens has been solved by multiple isomorphous replacement and refined at 2.3 A resolution, resulting in a crystallographic R-factor of 16.2%. The enzyme comprises three domains: an all beta-strand amino-terminal domain, a catalytic alpha/beta-barrel domain, and a small alpha+beta-fold domain. There are several residues with unusual geometries in the structure. Structure determination of chitinase A in complex with N,N',N",N"'-tetra-acetylo-chitotetraose, together with biochemical and sequence analysis data, enabled the positions of the active-site and catalytic residues to be proposed. CONCLUSIONS: The reaction mechanism seems to be similar to that of lysozyme and most other glycosylhydrolases, i.e. general acid-base catalysis. The role of the amino-terminal domain could not be identified, but it has similarities to the fibronectin III domain. This domain may possibly facilitate the interaction of chitinase A with chitin.
Amino Acid Sequence↗
Evolutionary divergence and conservation of trypsin.
The trypsin sequences currently available in the data banks have been collected and aligned using first the amino acid sequence homology and, subsequently, the superposed crystal structures of trypsins from the cow, the bacterium Streptomyces griseus and the fungus Fusarium oxysporum. The phylogenetic tree constructed according to this multiple alignment is consistent with a continuous evolutionary divergence of trypsin from a common ancestor of both prokaryotes and eukaryotes. Comparison of crystal structures reveals a strict conservation of secondary structure. Similarly, in the alignment of all the sequences, insertions and deletions occur only in regions corresponding to loops between the secondary structure elements in the known crystal structures. The conserved residues cluster around the active site. Almost all conserved residues can be associated with one of the basic functional features of the protein: zymogen activation, catalysis and substrate specificity. In contrast, the residues of the hydrophobic core of the protein and the calcium ion binding sites are generally not conserved. The conserved features of trypsin and the nature of the conservation are discussed in detail.
Amino Acid Sequence↗
The crystal structure of the complexes of concanavalin A with 4'-nitrophenyl-alpha-D-mannopyranoside and 4'-nitrophenyl-alpha-D-glucopyranoside.
Concanavalin A (Con A) is the best-known plant lectin and has important in vitro biological activities arising from its specific saccharide-binding ability. Its exact biological role still remains unknown. The complexes of Con A with 4'-nitrophenyl-alpha-D-mannopyranoside (alpha-PNM) and 4'-nitrophenyl-alpha-D-glucopyranoside (alpha-PNG) have been crystallized in space group P2(1)2(1)2 with cell dimensions a = 135.19 A, b = 155.38 A, c = 71.25 A and a = 134.66 A, b = 155.67 A, and c = 71.42 A, respectively. X-ray diffraction intensities to 2.75 A for the alpha-PNM and to 3.0 A resolution for the alpha-PNG complex have been collected. The structures of the complexes were solved by molecular replacement and refined by simulated annealing methods to crystallographic R-factor values of 0.185/0.186 and free-R-factor values of 0.260/0.274, respectively. In both structures, the asymmetric unit contains four molecules arranged as a tetramer, with approximate 222 symmetry. A saccharide molecule is bound in the sugar-binding site near the surface of each monomer. The nonsugar (aglycon) portion of the compounds used helps to identify the exact orientation of the saccharide in the sugar-binding pocket and is involved in major interactions between tetramers. The hydrogen bonding network in the region of the binding site has been analyzed, and only minor differences with the previously reported Con A-methyl-alpha-D-mannopyranoside complex structure have been observed. Structural differences that may contribute to the slight preference of the lectin for mannosides over glucosides are discussed. Calculations indicate a negative electrostatic surface potential for the saccharide binding site of Con A, which may be important for its biological activity. It is also shown in detail how a particular class of hydrophobic ligands interact with one of the three so-called characteristic hydrophobic sites of the lectins.
Binding Sites↗