Biomedical subjects

A P Gunning

Publications and source records attributed to A P Gunning.

15 recordsLinked to original sources

PubMed2005

Comparative imaging of a bacterial surface-located GFP fusion protein by epifluorescence and scanning near-field optical microscopy.

IcsA is an autotransporter protein that plays a role in the virulence of Shigella bacteria. We have examined the cellular localization of a fusion of an IcsA fragment to the green fluorescent protein (GFP) expressed in Escherichia coli using a dual epifluorescence and scanning near-field optical microscope. By combining the data obtained from far-field with near-field microscopy of the same sample, discrimination between surface-bound fusion proteins and fusion proteins located in the cellular cytoplasm becomes possible. Furthermore, and for the first time, the inherent advantages in resolution of the near-field images provides highly specific details of the location of a GFP fusion protein on a bacterial cell surface.

Bacterial Proteins↗

PubMed2004

Atomic force microscopy of emulsion droplets: probing droplet-droplet interactions.

A method has been developed for attaching oil (tetradecane) droplets to the end of an atomic force microscopy (AFM) cantilever and for immobilizing droplets on a glass substrate. This approach has permitted the monitoring of droplet-droplet interactions in aqueous solution as a function of interdroplet separation. Coating the droplet surfaces with added proteins or surfactants has allowed the production of model emulsions. We demonstrate that AFM measurements of droplet deformability are sensitive to interfacial rheology by modifying the interfacial film on a pair of droplets in situ. For droplets coated with the anionic surfactant sodium dodecyl sulfate, screening of the double layer has been found to facilitate coalescence. Direct imaging of the droplets has revealed the presence of regularly spaced concentric rings on the droplet surfaces. Careful experimental studies suggest that these structures may be imaging artifacts and are not perturbations of the droplet surface determined by the composition of the interface.

Alkanes↗

PubMed2004

Watching molecular processes with the atomic force microscope: dynamics of polymer adsorption and desorption at the single molecule level.

The formation of networks is an important step in the synthesis of many biological assemblies. For example, during the synthesis of plant cell walls the factors which dictate the arrangement of the polymeric constituents that make up the cell wall are not yet understood. Factors such as site-directed binding provide a possible theoretical background for beginning to understand the assembly of complex biological structures, but modelling of this process is difficult, time consuming and lacks experimental methods for verification. Through the use of atomic force microscopy (AFM) it has been demonstrated that changes in the binding of a single heterogeneous cell wall polysaccharide to a charged substrate can be followed in real time. Furthermore, subsequent image analysis allows the probability of binding of the molecule to be mapped to produce a real data set which is comparable with those obtained in simulation studies. In addition, these AFM studies have provided new mechanistic clues to the adsorption/desorption process of this polysaccharide.

Adsorption↗

PubMed2002

Allergens of the cupin superfamily.

The cupin family comprises a family of proteins possessing a common beta-barrel structure that is thought to have originated in a prokaryotic ancestor. This structural motif is found as a single domain in fungal spherulins, fern sporulins and the germins/oxalate oxidase proteins of plants, while the globular storage proteins of plants, called legumins (11 S) and euvicilins (7 S), are two-domain cupins. The 11 S globulins are hexameric heteroligomeric proteins of M (r) approximately 360000, with each subunit comprising an acidic 30000-40000- M (r) polypeptide that is disulphide-linked to a 20000- M (r) basic polypeptide. A number of cupins have been identified as major plant food allergens, including the 7 S globulins of soybean (beta-conglycinin), peanut (conarachin; Ara h 1), walnut (Jug r 2) and lentil, and the 11 S globulins of peanut (arachin; Ara h 3), soybean (glycinin) and possibly also coconut and walnut. Other members of the cupin superfamily have not been identified as allergens, with the exception of one germin (germination-specific protein) from pepper. Cupins are generally very stable proteins. A summary of our current knowledge of allergenic seed storage globulins will be presented, together with an overview of cupin structure and stability properties, as illustrated by the allergenic soya globulins, glycinin and beta-conglycinin.

Allergens↗

PubMed2001

Both binding sites of the starch-binding domain of Aspergillus niger glucoamylase are essential for inducing a conformational change in amylose.

The interaction of the two binding sites of the starch-binding domain (SBD) of Aspergillus niger glucoamylase 1 (GA-I) with substrate has been investigated by using atomic force microscopy (AFM) and UV difference spectroscopy in combination with site-specific mutants of both SBD and GA-I. The SBD possesses two binding sites with distinct affinities towards the soluble linear substrate maltoheptaose; dissociation constants (K(d)) of 17 and 0.95 microM were obtained for W563 K (binding site 2 mutant) and W590 K (binding site 1 mutant), respectively, compared to an apparent K(d) of 23 microM for the wild-type SBD. Further, the two sites are almost but not totally independent of each other for binding, since abolishing one site does not prevent the amylose chain binding to the other site. Using AFM, we show that the amylose chains undergo a conformational change to form loops upon binding to the SBD, using either the recombinant wild-type SBD or a catalytically inactive mutant of GA-I. This characteristic conformation of amylose is lost when one of the SBD binding sites is eliminated by site-directed mutagenesis, as seen with the mutants W563 K or W590 K. Therefore, although each binding site is capable of simple binding to a ligand, both sites must be functional in order to induce a gross conformational change of the amylose molecules. Taken together these data suggest that for the complex with soluble amylose, SBD binds to a single amylose chain, site 1 being responsible for the initial recognition of the chain and site 2 being involved in tighter binding, leading to the circularisation of the amylose chain observed by AFM. Binding of the SBD to the amylose chain results in a novel two-turn helical amylose complex structure. The binding of parallel amylosic chains to the SBD may provide a basis for understanding the role of the SBD in facilitating enzymatic degradation of crystalline starches by glucoamylase 1.

Amino Acid Substitution↗

PubMed2001

Formation of thermally induced aggregates of the soya globulin beta-conglycinin.

The effect of ionic strength (I) on the formation of thermally induced aggregates by the 7S globular storage protein of soya, beta-conglycinin, has been studied using atomic force microscopy. Aggregates were only apparent when I> or =0.1, and had a fibrous appearance, with a height (diameter) of 8-11 nm. At high ionic strength (I=1.0) the aggregates appeared to associate into clumps. When aggregate formation was studied at I=0.2, it was clear that aggregation only began at temperatures above the main thermal transition for the protein at 75 degrees C, as determined by differential scanning calorimetry. This coincided with a small change in secondary structure, as indicated by circular dichroism spectroscopy, suggesting that a degree of unfolding was necessary for aggregation to proceed. Despite prolonged heating the size of the aggregates did not increase indefinitely, suggesting that certain beta-conglycinin isoforms were able to act as chain terminators. At higher protein concentrations (1% w/v) the linear aggregates appeared to form large macroaggregates, which may be the precursors of protein gel formation. The ability of beta-conglycinin to form such distinctive aggregates is discussed in relation to the presence of acidic inserts in certain of the beta-conglycinin subunits, which may play an important role in limiting aggregate length.

Hot Temperature↗

PubMed2001

Lipid dynamics in the plasma membrane of ram and bull spermatozoa after washing and exposure to macromolecules BSA and PVP.

Seminal plasma proteins and macromolecules in the external medium have a major influence on the functionality of sperm plasma membranes. In this investigation we have examined their effects on lipid diffusion in the surface membrane of ram and bull spermatozoa as measured by fluorescence recovery after photobleaching (FRAP). Results show that progressive removal of seminal plasma from ram spermatozoa by repeated centrifugation and resuspension in media +/- 4% bovine serum albumin (BSA) or 0.4% polyvinlypyrrolidone (PVP) causes a reduction in lipid diffusion in all regions of the membrane. By contrast, bull sperm membranes respond with an increase in diffusion in all regions. Repeated washing of bull spermatozoa whose membranes were previously immobile (i.e., showed no recovery after FRAP) restored lipid diffusion suggesting an inhibitory effect of seminal plasma proteins. Further analysis by atomic force microscopy revealed a close association between BSA and the plasma membrane. It is concluded that diffusion of lipids in the plasma membrane of ejaculated ram and bull spermatozoa is influenced by seminal plasma proteins and the composition of the suspending medium. Mol. Reprod. Dev. 59:306-313, 2001.

Animals↗

PubMed2001

In situ measurement of the displacement of protein films from the air/water interface by surfactant.

The displacement of spread protein films from the air/water interface by surfactant was followed using Brewster angle microscopy (BAM) and interfacial rheology. The displacement of beta-lactoglobulin and beta-casein by a nonionic surfactant was monitored as a function of both surface pressure and time. In both cases, protein displacement occurred over the same surface pressure range that had been observed previously by atomic force microscopy (AFM). In the case of the beta-lactoglobulin, surfactant domains grew large enough in the protein film to be visible in the BAM images. The shapes of the domains were very similar to those seen previously by AFM in the late stages of displacement. The results from both proteins confirm the results published previously while highlighting some implications for the application of the "orogenic" model of displacement for large protein films. The surface rheological data showed that the beta-lactoglobulin/surfactant mixed film retained much of its elasticity until the latter stages of displacement. This indicates that at least in the early stages of displacement, the mixed film was dominated by the behavior of the protein in the film.

Air↗

PubMed1998

Characterisation of the polysaccharide produced by Acetobacter xylinum strain CR1/4 by light scattering and atomic force microscopy.

The molecular weight of the extracellular polysaccharide (CR1/4) produced by Acetobacter xylinum strain CR1/4 has been shown to be dependent upon growth conditions. Under normal growth conditions a high molecular weight polysaccharide ( > 1 x 10(6) Da) is produced. Maintaining the pH at 5 results in an order of magnitude increase in the total yield of polysaccharide, but also an order of magnitude decrease in molecular weight. Analysis of the CR1/4 polysaccharides by the techniques of atomic force microscopy and static light scattering suggests that they are double helices. In solution the molecules behave as stiff coils with a Kuhn statistical segment length of 325 nm.

Carbohydrate Conformation↗

PubMed1997

Atomic force microscopy of plant cell walls, plant cell wall polysaccharides and gels.

Methods developed for the routine imaging of polysaccharides by atomic force microscopy (AFM) have been used to image plant polysaccharides from higher plants (pectin) and algae (carrageenan). These methods have been extended to image K-carrageenan association in hydrated films. Finally, AFM has been used to image polysaccharide architecture in moist plant cell walls. Simple experimental and image processing methods have been used to enhance molecular structure in 'rough' cell wall surfaces.

Cell Wall↗

PubMed1996

Imaging polysaccharides by atomic force microscopy.

Techniques have been developed for the routine reliable imaging of polysaccharides by atomic force microscopy (AFM). The polysaccharides are deposited from aqueous solution onto the surface of freshly cleaved mica, air dried, and then imaged under alcohols. The rationale behind the development of the methodology is described and data is presented for the bacterial polysaccharides xanthan, acetan, and the plant polysaccharides l-carrageenan and pectin. Studies on uncoated polysaccharides have demonstrated the improved resolution achievable when compared to more traditional metal-coated samples or replicas. For acetan the present methodology has permitted imaging of the helical structure. Finally, in addition to data obtained on individual polysaccharides, AFM images have also been obtained of the network structures formed by kappa-carrageenan and gellan gum.

Image Processing, Computer-Assisted↗

PubMed1996

Visualization of plant cell walls by atomic force microscopy.

Atomic force microscopy has been used to visualize the ultrastructure of hydrated plant cell wall material from prepared apple (Malus pumila MILL; Cox orange pippin), water chestnut (Eleocharis dulcis L.), potato (Solanum tuberosum L.; Bintje), and carrot (Daucus carota L.; Amsterdamse bak) parenchyma. Samples of cell wall material in aqueous suspension were deposited onto freshly cleaved mica. Excess water was blotted away and the moist samples were imaged in air at ambient temperature and humidity. The three-dimensional images obtained highlighted the layered structure of the plant cell walls and revealed features interpreted as individual cellulose microfibrils and plasmodesmata.

Biophysical Phenomena↗

PubMed1995

Observation of the helical structure of the bacterial polysaccharide acetan by atomic force microscopy.

A method has been developed that has been found to give reproducible images of uncoated polysaccharides by Atomic Force Microscopy (AFM). Aqueous solutions of the polysaccharide are deposited as drops onto freshly cleaved mica surfaces, air dried, and then imaged under butanol. The method has been used to obtain images of the bacterial polysaccharide acetan. In regions within the deposited sample, where the molecules are aligned side-by-side, it has been possible to observe a periodic structure along the polysaccharide chain, attributable to the helical structure of acetan.

Acetobacter↗

PubMed1993

Characterization of a variant of the polysaccharide acetan produced by a mutant of Acetobacter xylinum strain CR1/4.

Acetobacter xylinum NRRL B42 (NCIB 40123) produces both cellulose and a complex anionic branched heteropolysaccharide called acetan. Chemical mutagenesis was used to isolate stable cellulose-minus Acetobacter xylinum mutants. Further chemical mutagenesis of these cellulose-minus A. xylinum bacteria was used to select mutants which secrete polysaccharides which are variants of the acetan structure. Preparation, purification and characterization of these polysaccharides are described. Methylation analysis of the polysaccharide structure CR1/4 suggests that the polysaccharide has an acetan structure with a truncated sidechain terminating in glucuronic acid.

Carbohydrate Conformation↗

PubMed1990

Light scattering studies of tetramethyl ammonium gellan.

Tetramethyl ammonium (TMA) gellan does not gel. Light scattering studies suggest that in solutions of TMA gellan, in tetramethyl ammonium chloride (TMACI), the gellan molecules assemble end to end to produce elongated fibrous structures. Such fibrils are envisaged as resulting from double-helix formation between the ends of neighbouring gellan molecules. Fibrils with molecular weights ranging from (1.06 +/- 0.06) x 10(5) to (4.5 +/- 0.1) x 10(6) have been observed. The molecular weights obtained depended upon the pore size of the filters used to clarify the solutions. The formation of strong gels, in the presence of gel promoting cations, is attributed to a localized ordered lateral association, or crystallization of regions of these fibrils. It is suggested that such a model for gelation may be of general applicability to a number of polysaccharide systems.

Crystallization↗