Biomedical subjects

A Martin-Esteban

Publications and source records attributed to A Martin-Esteban.

9 recordsLinked to original sources

PubMed2005

HPLC imprinted-stationary phase prepared by precipitation polymerisation for the determination of thiabendazole in fruit.

A molecularly imprinted polymer (MIP) tailored for the HPLC determination of the fungicide thiabendazole (TBZ) has been synthesised in one single preparative step by precipitation polymerisation in an acetonitrile/toluene co-solvent, using TBZ as template molecule, methacrylic acid as functional monomer and divinylbenzene-80 as crosslinker. The imprinted polymer particulates obtained were characterised by scanning electron microscopy and nitrogen sorption porosimetry. These analyses showed clearly that spherical polymer particulates (polymer microspheres) with narrow size distributions (average particle diameter approximately 3.5 microm) and well-developed pore structures had been produced. The imprinted microspheres were packed into a stainless steel HPLC column (50 x 4.6 mm id) and evaluated as an imprinted stationary phase. The imprinting effect was demonstrated clearly, i.e., the column was observed to bind TBZ selectively, and the effect of different chromatographic parameters (e.g., temperature, flow-rate and elution solvents) on TBZ retention/elution studied. Under optimised conditions, the TBZ-imprinted column was used for the HPLC-fluorescence (HPLC-F) determination of TBZ directly from orange (both whole fruit and juice), lemon, grape and strawberry extracts at low concentration levels in less than 15 min, without any need for a clean-up step in the analytical protocol.

Antinematodal Agents↗

PubMed2005

Selective high performance liquid chromatography imprinted-stationary phases for the screening of phenylurea herbicides in vegetable samples.

Molecularly imprinted polymers (MIPs) for the determination of phenylurea herbicides have been synthesized by polymerisation of the appropriated reagents mixture within the pores of preformed spherical silica particles leading to a silica-MIP composite material. Subsequently, the silica matrix was etched away resulting in MIP beads which can be considered the "mirror image" of the original silica mold. The MIP particles were packed in stainless steal HPLC columns (125mmx4.6mm I.D.) and the materials were evaluated as imprinted-stationary phases for phenylurea herbicides. The imprinting effect of the originated specific binding sites for the selective recognition of phenylurea herbicides was clearly demonstrated. An efficient separation of a mixture of phenylurea herbicides in two groups, with or without a methoxy group in the chemical structure, was achieved and well shaped and defined peaks were obtained. Finally, the optimum imprinted column (prepared using linuron as template, 2-(trifluoromethyl)-acrylic acid as monomer, 72h of polymerisation time and the subsequent dissolution of silica matrix) was used for the LC-UV screening of phenylurea herbicides directly from vegetable sample extracts without any previous clean-up step at low concentration level in less than 10min.

Chromatography, High Pressure Liquid↗

PubMed2005

Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides.

Three different molecularly imprinted polymers (MIPs) have been prepared by precipitation polymerisation using linuron (LIN) or isoproturon (IPN) (phenylurea herbicides) as templates and methacrylic acid (MAA) or trifluormethacrylic acid (TFMAA) as functional monomers. The ability of the different polymers to selectively rebind not only the template but also other phenylurea herbicides has been evaluated. In parallel, the influence of the different templates and functional monomers used during polymers synthesis on the performance of the obtained MIPs was also studied through different rebinding experiments. The experimental binding isotherms were fitted to the Langmuir-Freundlich isotherm allowing to describe the kind of binding sites present in the imprinted polymers under study. It was concluded that TFMAA-based polymer using IPN as template presents the best properties to be used as a selective sorbent for the extraction of phenylurea herbicides.

Acrylates↗

PubMed2005

Clean up of phenylurea herbicides in plant sample extracts using molecularly imprinted polymers.

Two different molecularly imprinted polymers (MIPs) were prepared by precipitation polymerization using linuron or isoproturon (phenylurea herbicides) as templates and trifluormethacrylic acid as functional monomer. These materials were used as selective sorbents in the development of molecularly imprinted solid-phase extraction (MISPE) procedures for the determination of several phenylurea herbicides (fenuron, metoxuron, chlortoluron, isoproturon, metobromuron, and linuron) in plant samples extracts. The MISPE procedures were fully optimized and applied to the clean up of selected phenylurea herbicides in carrot, potato, corn, and pea sample extracts and finally determined by HPLC-UV at 244 nm. Although a high degree of clean up was obtained, a decrease of the MIP recognition capabilities was observed in subsequent runs. Thus, a previous clean up protocol based on the use of a non-imprinted polymer was used to prevent the loss of MIP performance and to ease the removal of interferences. Following this procedure, namely two-step MISPE, matrix compounds were almost completely removed by the non-imprinted polymer retaining the ability of MIPs to selectively rebind target analytes unaltered. The developed MISPE procedures allowed the screening of phenylurea herbicides in plant samples at concentration levels required by established European maximum residue limits.

Food Analysis↗

PubMed2004

Characterisation and quality assessment of binding sites on a propazine-imprinted polymer prepared by precipitation polymerisation.

In this paper, the Langmuir-Freundlich isotherm (LF) is used to characterise a propazine-imprinted polymer obtained by precipitation polymerisation (MIP-P). Different rebinding studies were carried out allowing to explain the different interactions taking place between the molecularly imprinted polymer and six triazinic herbicides (desisopropylatrazine, desethylatrazine, simazine, atrazine, propazine and prometryn). The LF fitting parameters obtained (total number of binding sites, heterogeneity index and mean binding affinity) were compared to those obtained in a previous work for a propazine-imprinted polymer prepared by bulk polymerisation (MIP-B). From that study, it was concluded that precipitation polymerisation yielded polymers with a more homogeneous binding site distribution and higher affinity constants.

Binding Sites↗

PubMed2003

Molecularly imprinted polymers: towards highly selective stationary phases in liquid chromatography and capillary electrophoresis.

Molecularly imprinted polymers (MIPs) are synthetic polymers with a predetermined selectivity for a given analyte, or group of structurally related compounds, that make them ideal materials to be used in separation processes. In this sense, it is not surprising that the first applications of MIPs were as tailor-made chiral stationary phases in liquid chromatography. However, peak broadening and tailing, especially of the more retained enantiomers, were observed. Accordingly, this paper gives an overview of the attempts carried out during the recent years to improve the chromatographic performance of MIPs in liquid chromatography and capillary electrophoresis as well as the more recent applications. We conclude that MIPs are very promising materials to be used as selective stationary phases in chromatography although further developments are necessary in order to fully exploit their potential.

Binding Sites↗

PubMed2001

Molecular recognition in a propazine-imprinted polymer and its application to the determination of triazines in environmental samples.

An analytical methodology for the determination of triazines in environmental samples incorporating a molecularly imprinted solid-phase extraction (MISPE) process using a propazine-imprinted polymer was developed. Two different polymers were prepared using acetonitrile or toluene as porogen, and their optimum loading, washing, and elution conditions were established. Although both polymers were able to recognize several chlorotriazines (propazine, atrazine, simazine, desethylatrazine, and desisopropylatrazine), the polymer prepared in toluene showed the best performance and was also capable of recognizing a methylthiotriazine (prometryn). A binding study carried out in this polymer demonstrated that it possesses heterogeneous binding sites with different binding abilities. From this study, it was also concluded that desethylatrazine and desisopropylatrazine displace the other triazines at high concentrations, including the template molecule. The accuracy and selectivity of the MISPE process developed was verified using a certified reference material for drinking water containing atrazine and simazine among other commonly used pesticides. Finally, the MISPE procedure was successfully applied to the cleanup of drinking and groundwater, soil, and corn sample extracts, and the triazines were determined by micellar electrokinetic chromatography.

Chromatography, Micellar Electrokinetic Capillary↗

PubMed2001

Molecularly imprinted polymers: new molecular recognition materials for selective solid-phase extraction of organic compounds.

During the last few years molecularly imprinted polymers have appeared as new selective sorbents for solid-phase extraction of organic compounds in different samples. Molecular imprinting technology involves the preparation of a polymer with specific recognition sites for certain molecules. Once the polymer has been obtained, it can be used in solid-phase extraction protocols, where a careful selection of the most appropriate solvents to be used in the different steps (sample loading, washing and elution) is needed in order to extract the target analyte selectively. This review describes the state of the art of this methodology, including the preparation of imprinted polymers, a process description for molecularly imprinted solid-phase extraction, as well as more recent applications. It is concluded that molecularly imprinted solid-phase extraction is a powerful tool to selectively isolate certain analytes, and future advances are to be expected in order to widen the field of application.

Chromatography, Liquid↗

PubMed1997

Mixed immunosorbent for selective on-line trace enrichment and liquid chromatography of phenylurea herbicides in environmental waters.

An immunosorbent containing antiisoproturon and antichlortoluron antibodies immobilised on aldehyde-activated silica was employed for the on-line preconcentration and liquid chromatography-diode array detection of several phenylureas. The efficiency of the coupling of the immunosorbent to the liquid chromatographic system and the characteristics of the immunosorbent were evaluated. The on-line system allowed the selective trace enrichment of chlortoluron, isoproturon, metobromuron, linuron and chlorbromuron at the 0.05-0.5 microgram l-1 level in ground and river waters and provided detection limits in the range 0.01-0.03 microgram l-1 by percolating only 10 ml of water sample. The proposed method was validated by analysing freeze-dried tap water samples with a high content in pesticides of different chemical functionalities. The results obtained were compared with the mean value obtained in an interlaboratory exercise.

Chromatography, Liquid↗