Search PubMed⌕ Search

Biomedical subjects

A Komori

Publications and source records attributed to A Komori.

At least 19 recordsLinked to original sources
PubMed2006

Observation of stable superdense core plasmas in the large helical device.

In reduced recycling discharges in the Large Helical Device, a super dense core plasma develops when a series of pellets are injected. A core region with density as high as 4.5 x 10(20) m(-3) and temperature of 0.85 keV is maintained by an internal diffusion barrier with very high-density gradient. These results may extrapolate to a scenario for fusion ignition at very high density and relatively low temperature in helical devices.

Journal Article↗
PubMed2006

Slow transition of energy transport in high-temperature plasmas.

A new slow transition process for energy transport in magnetically confined plasmas is reported. The slow transition is characterized by the change between two metastable transport conditions characterized by a weak and a strong electron temperature (Te) dependence of normalized heat flux. These two branches are found to merge at the critical gradient. In metastable transport, the derivative of normalized heat flux to the Te gradient, [EQUATION: SEE TEXT], is positive, while it becomes negative during the transition phase. The time for the transition increases as the normalized Te gradient is increased and exceeds the transport time scale characterized by the global energy confinement time.

Journal Article↗
PubMed2003

Sawtooth oscillation in current-carrying plasma in the large helical device.

Sawtooth oscillations have been observed in current-carrying helical plasmas by using electron-cyclotron-emission diagnostics in the Large Helical Device. The plasma current, which is driven by neutral beam injection, reduces the beta threshold of the sawtooth oscillation. When the central q value is increased due to the plasma current, the core region crashes, and, when it is decreased, the edge region crashes annularly. Observed rapid mixture of the plasma in the limited region suggests that these sawtooth crashes are reconnection phenomena. Unlike previous experiments, no precursor oscillation has been observed.

Journal Article↗
PubMed2002

Island dynamics in the large-helical-device plasmas.

In the Large Helical Device plasma discharges, the size of an externally imposed island with mode number ( n/m = 1/1) decreases substantially when the plasma is collisionless ( nu(*)< approximately 1) and the beta is finite ( > approximately 0.1%) at the island location. For the collisional plasmas with finite beta, on the other hand, the size of the island increases. However, there is a threshold in terms of the vacuum island size below which the island enlargement is not seen.

Journal Article↗
PubMed2001

Observation of plasma flow at the magnetic island in the large helical device.

Radial profiles of ion temperature and plasma flow are measured at the n/m = 1/1 magnetic island produced by external perturbation coils in the Large Helical Device. The sheared poloidal flows and sheared radial electric field are observed at the boundaries of the magnetic island, because the poloidal flow vanishes inside the static magnetic island. When the width of the magnetic island becomes large, the flow along the magnetic flux surface inside the magnetic island appears around the O point in the direction which reduces the shear of the poloidal flow at the boundary of the magnetic island.

Journal Article↗
PubMed2001

Observation of the "self-healing" of an error field island in the large helical device.

It was observed that the vacuum magnetic island produced by an external error magnetic field in the large helical device shrank in the presence of plasma. This was evidenced by the disappearance of flat regions in the electron temperature profile obtained by Thomson scattering. This island behavior depended on the magnetic configuration in which the plasmas were produced.

Journal Article↗
PubMed2001

Reduction of ion thermal diffusivity associated with the transition of the radial electric field in neutral-beam-heated plasmas in the large helical device.

Recent large helical device experiments revealed that the transition from ion root to electron root occurred for the first time in neutral-beam-heated discharges, where no nonthermal electrons exist. The measured values of the radial electric field were found to be in qualitative agreement with those estimated by neoclassical theory. A clear reduction of ion thermal diffusivity was observed after the mode transition from ion root to electron root as predicted by neoclassical theory when the neoclassical ion loss is more dominant than the anomalous ion loss.

Journal Article↗
PubMed2001

Tensile bond strength of light-cured resin-reinforced glass ionomer cement with delayed light exposure.

In the clinical situations, the time intervals between material mixing and light exposure during bracket bonding, using light-cured resin-reinforced glass ionomer cement (LCGIC), may vary for each individual bracket. This study determined the tensile bond strengths of LCGIC subjected to various time intervals, and evaluated the durability with thermocycling. Comparisons were made between LCGIC and light-cured composite resin (LCR). Two hundred and forty bovine teeth were chosen as specimens. Light exposure was performed 5, 10, 20, and 40 min after the commencement of powder/liquid mixing. The durability was evaluated by thermocycling for 2000 times at temperatures between 5 degrees C and 55 degrees C, with a 30-s dwell time. Tensile bond strengths of LCGIC and LCR after 5 min, representing the general condition in clinical use, equaled 5.7 +/- 1.5 MPa and 5.1 +/- 2.6 MPa, respectively. For the LCGIC groups, no significant differences were seen between bond strengths with and without thermocycling. Also, no significant differences were noted among any time intervals. For the LCR groups, there were also no significant differences with and without thermocycling. The tensile bond strength of LCR showed highly significant differences within groups across time. Compared with LCR, the failure sites for brackets bonded with LCGIC appeared to be predominantly at the bracket/adhesive interface. The standard deviations of LCR were high when compared with those of LCGIC. The bond strength of LCGIC with or without thermocycling surpassed the clinically required minimum. LCGIC may be an advantageous alternative to LCR for orthodontic bracket bonding.

Journal Article↗
PubMed2001

The translesion DNA polymerase zeta plays a major role in Ig and bcl-6 somatic hypermutation.

Ig somatic mutations would be introduced by a polymerase (pol) while repairing DNA outside main DNA replication. We show that human B cells constitutively express the translesion pol zeta, which effectively extends DNA past mismatched bases (mispair extender), and pol eta, which bypasses DNA lesions in an error-free fashion. Upon B cell receptor (BCR) engagement and coculture with activated CD4+ T cells, these lymphocytes upregulated pol zeta, downregulated pol eta, and mutated the Ig and bcl-6 genes. Inhibition of the pol zeta REV3 catalytic subunit by specific phosphorothioate-modified oligonucleotides impaired Ig and bcl-6 hypermutation and UV damage-induced DNA mutagenesis, without affecting cell cycle or viability. Thus, pol zeta plays a critical role in Ig and bcl-6 hypermutation, perhaps facilitated by the downregulation of pol eta.

B-Lymphocytes↗
PubMed2001

Orthodontic bracket bonding with a plasma-arc light and resin-reinforced glass ionomer cement.

Developments in light-curing technology have led to the introduction of a plasma-arc light-curing unit that delivers high-intensity output for faster curing. The purposes of this study were to determine the shear bond strengths of light-cured resin-reinforced glass ionomer cement cured with a plasma-arc light-curing unit and to evaluate the durability of the resultant bond strength with thermal cycling. Comparisons were made between light-cured resin-reinforced glass ionomer cement and light-cured composite resin. Two light-curing units were used in this study: a plasma-arc light-curing unit and a conventional light-curing unit. The mean shear bond strengths of light-cured resin-reinforced glass ionomer cement with the plasma-arc and the conventional light-curing units were 20.3 MPa and 26.0 MPa, respectively. An analysis of variance showed no statistically significant differences between the plasma-arc and the conventional light-curing units. Light-cured resin-reinforced glass ionomer cement and light-cured composite resin demonstrated similar bond strengths and exhibited no statistical differences. There was no statistical difference in bond strength between the teeth that were thermal cycled and those that were not. Failure sites for the brackets bonded with light-cured resin-reinforced glass ionomer cement appeared to be predominantly at the bracket-adhesive interface. The SDs of light-cured composite resin were high for both light-curing units. Whereas the coefficients of variation for light-cured resin-reinforced glass ionomer cement ranged from 20% to 30%, those of light-cured composite resin ranged from 40% to 60%. The bond strength of light-cured resin-reinforced glass ionomer cement cured with either a conventional light-curing unit or a plasma-arc light-curing unit surpassed the clinically required threshold. The plasma-arc light-curing unit may be an advantageous alternative to the conventional light-curing unit for orthodontic bracket bonding with both light-cured resin-reinforced glass ionomer cement and light-cured composite resin.

Acrylic Resins↗
PubMed2000

Energy confinement time and heat transport in initial neutral beam heated plasmas on the large helical device

The confinement characteristics of large net-current-free plasmas heated by neutral-beam injection have been investigated in the Large Helical Device (LHD). A systematic enhancement in energy-confinement times from the scaling derived from the medium-sized heliotron/torsatron experiments have been observed, which is attributed to the edge pedestal. The core confinement is scaled with the Bohm term divided by the square root of the gyro radii. The comparative analysis using a dimensionally similar discharge in the Compact Helical System indicates gyro-Bohm dependence in the core and transport improvement in the edge region of LHD plasmas.

Journal Article↗
PubMed2000

Edge thermal transport barrier In LHD discharges

In LHD discharges a significant enhancement of the global energy confinement has been achieved for the first time in a helical device with an edge thermal barrier, which exhibits a sharp gradient at the edge of the temperature profile. Key features associated with the barrier are quite different from those seen in tokamaks: (i) almost no change in particle (including impurity) transport, (ii) a gradual formation of the barrier, (iii) a very high ratio of the edge temperature to the average temperature, and (iv) no edge relaxation phenomenon. These features are very attractive in applying the thermal barrier to future reactor grade devices.

Journal Article↗
PubMed2000

Carotenoids in human blood plasma after ingesting paprika juice.

We investigated the presence of different carotenoids in male human subject after the ingestion of paprika juice, and identified capsanthin, capsanthone, cucurbitaxanthin A, 11-cis-capsanthin, lutein and zeaxanthin in the human plasma. These results suggest that capsanthone and 11-cis-capsanthin might be as important as capsanthin for human health.

Capsicum↗
PubMed1999

The effect of delayed light exposure on bond strength: light-cured resin-reinforced glass ionomer cement vs light-cured resin.

Under clinical situations, the intervals between material mixing and light exposure during bracket bonding using light-cured resin-reinforced glass ionomer cement may vary for each individual bracket. This study evaluates the bond strength of light-cured resin-reinforced glass ionomer cement subjected to various time intervals between material mixing and subsequent light exposure. This investigation was conducted in two parts. The first part consisted of measuring the enamel surface temperature to define the conditions under which the second part of the study was carried out. One hundred fifteen subjects, 63 males and 52 females, participated in this study. The over-all mean temperature as measured with a noncontact infrared thermometer was 31.9 degrees C. The second part of this study assessed tensile and shear bond strengths of light-cured resin-reinforced glass ionomer cement subjected to immediate light exposure (time interval, 5 minutes) and bond strengths subjected to light exposure at 10, 20, and 40 minutes after material mixing. Light-cured resin-reinforced glass ionomer cement was then compared with light-cured composite resin. Mean tensile and shear bond strengths of light-cured resin-reinforced glass ionomer cement exposed after 40 minutes were 4.5 MPa and 20.5 MPa, respectively. This represented a reduction of approximately 20% when compared with the 5-minute group. Scheffé test showed no statistically significant differences between any two time intervals. Mean bond strengths of the light-cured resin decreased with time. Tensile and shear bond strengths of light-cured resin indicated high statistical significance within groups across time. It could therefore be concluded that the bond strength of light-cured resin-reinforced glass ionomer cement was not affected by the timing of visible light exposure; whereas, the bond strength of light-cured resin decreased as time intervals increased. Light-cured resin-reinforced glass ionomer cement may thus serve as an advantageous alternative to composite resin for bracket bonding.

Adolescent↗
PubMed1999

Association of MTG8 (ETO/CDR), a leukemia-related protein, with serine/threonine protein kinases and heat shock protein HSP90 in human hematopoietic cell lines.

A proto-oncogene, MTG8 (ETO/CDR), is disrupted in the t(8;21) translocation associated with acute myeloid leukemia, and the gene product, MTG8, is a phosphoprotein capable of cell transformation in concert with v-H-ras. To obtain insight into functional regulation of MTG8 by phosphorylation, we studied protein kinases that interact with, and phosphorylate, MTG8 in vitro. Recombinant MTG8 protein was first found to be associated with two serine/threonine protein kinases in cell extracts from both HEL cells and a leukemic cell line carrying t(8;21). A cytoplasmic protein kinase of 61 kDa (MTG8N-kinase) phosphorylated the amino-terminal of MTG8, and another of 52 kDa (MTG8C-kinase) phosphorylated the carboxyl-terminal domain. In addition, we demonstrated that heat shock protein 90 (HSP90) specifically binds to the amino-terminal domain of MTG8 in vitro and in vivo. Thus, our results shed new light on post-translational regulation of MTG8, perturbation of which, in AML1-MTG8 protein, probably contributes to leukemogenesis.

Acute Disease↗
PubMed1998

Cancer inhibition by green tea.

Green tea is now an acknowledged cancer preventive in Japan. This paper discusses several important features of (-)-epigallocatechin gallate (EGCG), the main constituent of green tea and tea polyphenols. EGCG and other tea polyphenols inhibited growth of human lung cancer cell line, PC-9 cells with G2/M arrest. 3H-EGCG administered by p.o. intubation into mouse stomach revealed that small amounts of 3H-activity were found in various organs where EGCG and green tea extract had previously demonstrated their anticarcinogenic effects, such as skin, stomach, duodenum, colon, liver, lung and pancreas. Cancer onset of patients who had consumed over 10 cups of green tea per day was 8.7 years later among females and 3.0 years later among males, compared with patients who had consumed under three cups per day. The mechanisms of action of EGCG were briefly discussed with regard to inhibition of tumor necrosis factor-alpha (TNF-alpha) release.

3T3 Cells↗
PubMed1998

Tumourigenicity of MTG8, a leukaemia-related gene, in concert with v-Ha-ras gene in BALB/3T3 cells.

The MTG8 (ETO) gene has been identified as the translocation partner of AML1 (PEBP2alphaB or CBFalpha2) gene in the AML1/MTG8 (ETO) fused gene caused by t(8;21) translocation in human acute myeloid leukaemia, M2 type. Although AML1/MTG8 chimaeric protein is known to inhibit the functioning of AML1 protein, the precise function of MTG8 gene itself is not known yet. We studied the significance of MTG8 gene in the oncogenicity of AML1/MTG8 fused gene, by introducing full-length MTG8 cDNA into both BALB/3T3 cells containing v-Ha-ras gene (Bhas 42 cells) and BALB/3T3 cells without v-Ha-ras gene. Irrespective of the overexpression of MTG8 gene in both groups of cells, Bhas-MTG8 clones which contained v-Ha-ras gene and expressed the MTG8 gene at a level more than twice that of parental Bhas 42 cells induced cell transformation, whereas BALB-MTG8 clones without v-Ha-ras gene did not. Furthermore, injection of the transformed Bhas-MTG8 clones into the subcutaneous tissue of nude mice induced tumours, whereas that of BALB-MTG8 clones did not. These results suggest that MTG8 gene product, in cooperation with viral Ras protein, resulted in tumour formation. We provide the first evidence that MTG8 gene by itself has a carcinogenic property within the AML1/MTG8 (ETO) fused gene.

3T3 Cells↗