Search PubMed⌕ Search

Biomedical subjects

A Kidera

Publications and source records attributed to A Kidera.

At least 19 recordsLinked to original sources
PubMed2001

Environmental influence on electron scattering from a molecule.

The environmental influence on the electron scattering amplitudes of a molecule was evaluated by ab initio molecular-orbital calculations. The model system is formic acid in various states, i.e. the monomer, hydrogen-bonded dimer and ionized formate form. The model electrostatic potentials were calculated either in vacuo or with the polarizable continuum model as a simple model of an aqueous environment. It was found that charge compensation due to the environment affects the scattering amplitudes significantly. The resultant molecular electrostatic potential was fitted by six nucleus-centered Gaussians of site/environment-dependent atomic electrostatic potentials with small residual errors. Therefore, the site/environment-dependent atomic electrostatic potentials will give a good model for electron crystallography.

Journal Article↗
PubMed2001

Human ABCA1 contains a large amino-terminal extracellular domain homologous to an epitope of Sjögren's Syndrome.

ABCA1 has been suggested to play a key role in cellular lipid release from peripheral cells. In order to study structure-function relationship of this protein, the protein product of a full-length human ABCA1 cDNA was examined for its functions and topological orientation. The electrophoretic mobilities of human ABCA1 expressed in transfected cells increased when treated with N-glycosidase F, suggesting that ABCA1 is highly glycosylated. The ABCA1 was photoaffinity-labeled with ATP and mediated the apoA-I-dependent-release of cholesterol and phospholipid. The influenza hemagglutinin (HA) epitope was introduced into the amino-terminus (N-HA) or between the residues 207 and 208 (207-HA) of the protein. While an antibody against the C-terminus peptide of ABCA1 detected both fusion proteins, an anti-HA antibody did not react with the N-HA fusion protein. Confocal microscopy demonstrated strong cell surface signal with the anti-HA antibody of nonpermeabilized HEK293 cells expressing the 207-HA fusion protein. The results suggested that the signal peptide in the amino-terminal region is cleaved off in its mature form and that the following large hydrophilic region is exposed to outside of cells unlike previously proposed models. We found that this amino-terminal extracellular domain contains a segment homologous to the autoantigen SS-N, an epitope of Sjögren's syndrome, and further identified that ABCA7 codes for the autoantigen SS-N.

ATP Binding Cassette Transporter 1↗
PubMed2001

Physicochemical evaluation of protein folds predicted by threading.

Protein structure prediction remains an unsolved problem. Since prediction of the native structure seems very difficult, one usually tries to predict the correct fold of a protein. Here the "fold" is defined by the approximate backbone structure of the protein. However, physicochemical factors that determine the correct fold are not well understood. It has recently been reported that molecular mechanics energy functions combined with effective solvent terms can discriminate the native structures from misfolded ones. Using such a physicochemical energy function, we studied the factors necessary for discrimination of correct and incorrect folds. We first selected correct and incorrect folds by a conventional threading method. Then, all-atom models of those folds were constructed by simply minimizing the atomic overlaps. The constructed correct model representing the native fold has almost the same backbone structure as the native structure but differs in side-chain packing. Finally, the energy values of the constructed models were compared with that of the experimentally determined native structure. The correct model as well as the native structure showed lower energy than misfolded models. However, a large energy gap was found between the native structure and the correct model. By decomposing the energy values into their components, it was found that solvent effects such as the hydrophobic interaction or solvent shielding and the Born energy stabilized the correct model rather than the native structure. The large energetic stabilization of the native structure was attained by specific side-chain packing. The stabilization by solvent effects is small compared to that by side-chain packing. Therefore, it is suggested that in order to confidently predict the correct fold of a protein, it is also necessary to predict correct side-chain packing.

Amino Acid Sequence↗
PubMed2001

Dynamical transition of myoglobin in a crystal: comparative studies of X-ray crystallography and Mössbauer spectroscopy.

The crystallographic normal mode refinements of myoglobin at a wide range of temperature from 40 K to 300 K were carried out to study the temperature dependence of the internal atomic fluctuations. The refinement method decomposes the mean square displacement from the average position, (deltar2), into the contributions from the internal degrees of freedom and those from the external degrees of freedom. The internal displacements show linear temperature dependence as (deltar2)=alphaT+beta, throughout the temperature range measured here, and exhibit no obvious change in the slope alpha at the dynamical transition temperature (Tc=ca. 180 K). The slope alpha is practically the same as the value predicted theoretically by normal mode analysis. Such linear dependence is considered to be due to the following reason. The crystallographic Debye-Waller factor represents the static distribution caused by convolution of temperature-dependent normal mode motions and a temperature-independent set of the conformational substates. In contrast, Mössbauer absorption spectroscopy shows a clear increase in the gradient alpha at Tc. This difference from X-ray diffraction originates from the incoherent nature of the Mössbauer effect together with its high-energy resolution, which yields the self-correlation, and the temporal behavior of individual Fe atoms in the myoglobin crystal.

Crystallography, X-Ray↗
PubMed2000

Vibrational energy transfer in a protein molecule.

Mode coupling in a protein molecule was studied by a molecular dynamics simulation of the intramolecular vibrational energy transfer in myoglobin at near zero temperature. It was found that the vibrational energy is transferred from a given normal mode to a very few number of selective normal modes. These modes are selected by the relation between their frequencies, like Fermi resonance, governed by the third order mode coupling term. It was also confirmed that the coupling coefficients had high correlation with how much the coupled modes geometrically overlapped with each other.

Cold Temperature↗
PubMed2000

Free energy landscapes of peptides by enhanced conformational sampling.

The free energy landscapes of peptide conformations in water have been observed by the enhanced conformational sampling method, applying the selectively enhanced multicanonical molecular dynamics simulations. The conformations of the peptide dimers, -Gly-Gly-, -Gly-Ala-, -Gly-Ser-, -Ala-Gly-, -Asn-Gly-, -Pro-Gly-, -Pro-Ala-, and -Ala-Ala-, which were all blocked with N-terminal acetyl and C-terminal N-methyl groups, were individually sampled with the explicit TIP3P water molecules. From each simulation trajectory, we obtained the canonical ensemble at 300 K, from which the individual three-dimensional landscape was drawn by the potential of mean force using the three reaction coordinates: the backbone dihedral angle, psi, of the first amino acid, the backbone dihedral angle, phi, of the second amino acid, and the distance between the carbonyl oxygen of the N-terminal acetyl group and the C-terminal amide proton. The most stable state and several meta-stable states correspond to extended conformations and typical beta-turn conformations, and their free energy values were accounted for from the potentials of mean force at the states. In addition, the contributions from the intra-molecular energies of peptides and those from the hydration effects were analyzed. Consequently, the stable beta-turn conformations in the free energy landscape were consistent with the empirically preferred beta-turn types for each amino acid sequence. The thermodynamic values for the hydration effect were decomposed and they correlated well with the empirical values estimated from the solvent accessible surface area of each molecular conformation during the trajectories. The origin of the architecture of protein local fragments was analyzed from the viewpoint of the free energy and its decomposed factors.

Algorithms↗
PubMed1999

H3-rules: identification of CDR-H3 structures in antibodies.

For the third complementarity determining region of the antibody heavy chain (CDR-H3), we propose the 'H3-rules', which should identify the tertiary structure from the amino acid sequence of the CDR-H3 segment. A total of 100 CDR-H3 segments from well-determined crystal structures were analyzed. Distinctive relationships between the structures and the sequences were revealed from 55 segments, and the rules were examined for the other 45 segments and were verified. In some antibodies, basic residues at specific positions were revealed to be notable signals, with their ability to form salt bridges and to assume conformations inconsistent with the rules.

Amino Acid Sequence↗
PubMed1999

The structure of bacteriorhodopsin at 3.0 A resolution based on electron crystallography: implication of the charge distribution.

Electron crystallography has the potential to visualise the charge status of atoms. This is due to the significantly different scattering factors of neutral and ionised atoms for electrons in the low-resolution range (typically less than 5 A). In previous work, we observed two different types of densities around acidic residues in the experimental (|Fo|) map of bacteriorhodopsin (bR), a light-driven proton pump. We suggested that these might reflect different states of the acidic residues; namely, the protonated (neutral) and the deprotonated (negatively charged) state. To evaluate the observed charge more quantitatively, we refined the atomic model for bR and eight surrounding lipids using our electron crystallographic data set between 8.0 and 3.0 A resolution, where the charge effect is small. The refined model yielded an R-factor of 23.7% and a free R-factor of 33.0%. To evaluate the effect of charges on the density map, we calculated a difference (|Fo|-|Fc|) map including data of a resolution lower than 8.0 A resolution, where the charge effect is significant. We found strong peaks in the difference map mainly in the backbone region of the transmembrane helices. We interpreted these peaks to come from the polarisation of the polar groups in the main chain of the alpha-helices and we examined this by assuming a partial charge of 0.5 for the peptide carbonyl groups. The resulting R and free R-factors dropped from 0.250 and 0.341 to 0.246 and 0.336, respectively. Furthermore, we also observed some strong peaks around some side-chains, which could be assigned to positively charged atoms. Thus, we could show that Asp36 and Asp102 are likely to interact with cations nearby. In addition, peaks found around the acidic residues Glu74, Glu194 and Glu212 have different features and might represent positive charges on polarised water molecules or hydroxonium ions.

Amino Acid Sequence↗
PubMed1999

Structural motif of phosphate-binding site common to various protein superfamilies: all-against-all structural comparison of protein-mononucleotide complexes.

In order to search for a common structural motif in the phosphate-binding sites of protein-mononucleotide complexes, we investigated the structural variety of phosphate-binding schemes by an all-against-all comparison of 491 binding sites found in the Protein Data Bank. We found four frequently occurring structural motifs composed of protein atoms interacting with phosphate groups, each of which appears in different protein superfamilies with different folds. The most frequently occurring motif, which we call the structural P-loop, is shared by 13 superfamilies and is characterized by a four-residue fragment, GXXX, interacting with a phosphate group through the backbone atoms. Various sequence motifs, including Walker's A motif or the P-loop, turn out to be a structural P-loop found in a few specific superfamilies. The other three motifs are found in pairs of superfamilies: protein kinase and glutathione synthetase ATPase domain like, actin-like ATPase domain and nucleotidyltransferase, and FMN-linked oxidoreductase and PRTase.

Actins↗
PubMed1999

Diversity of functions of proteins with internal symmetry in spatial arrangement of secondary structural elements.

We carry out a systematic analysis of the correlation between similarity of protein three-dimensional structures and their evolutionary relationships. The structural similarity is quantitatively identified by an all-against-all comparison of the spatial arrangement of secondary structural elements in nonredundant 967 representative proteins, and the evolutionary relationship is judged according to the definition of superfamily in the SCOP database. We find the following symmetry rule: a protein pair that has similar folds but belong to different superfamilies has (with a very rare exception) certain internal symmetry in its common similar folds. Possible reasons behind the symmetry rule are discussed.

Models, Molecular↗
PubMed1998

Dynamic structure of subtilisin-eglin c complex studied by normal mode analysis.

Normal mode analysis of subtilisin-eglin c complex was performed to investigate the dynamics at the interface between the enzyme and the inhibitor. The internal motions of the complex calculated from the normal modes were divided into three parts: the internal motions changing the shape of each molecule, the external rigid-body motions changing their mutual dispositions, and the coupling between the internal and external motions. From the results of the analysis, the following characteristic features were found in the dynamics at the interface regions: 1) negative correlation between the internal and external motions within each molecule, and 2) positive correlation between the external motions of the two molecules. The former decreases the apparent amplitudes of motions at the interface. The latter minimizes the interference between individual motions of the two molecules. These dynamic characteristics allow the enzyme and the inhibitor to move as freely as possible. This finding suggests that the experimental evidence of the large entropy gain on binding should be attributed not only to strong hydrophobic interactions, but also to the dynamic structure of the complex, which is found to minimize an unavoidable loss of the conformational entropy on binding.

Models, Molecular↗
PubMed1998

Structural and functional effect of Trp-62-->Gly and Asp-101-->Gly substitutions on substrate-binding modes of mutant hen egg-white lysozymes.

In order to clarify the structural role of subsite B of hen egg-white lysozyme in hydrolytic activity towards a carbohydrate substrate, we analysed the structures of Trp-62-->Gly and Asp-101-->Gly mutant hen lysozymes, which have no side chain at positions 62 or 101, complexed with a substrate analogue, (N-acetyl-d-glucosamine)3 [(GlcNAc)3], using X-ray crystallography. The overall protein structures in the mutant lysozyme complexes were almost identical to those in the wild type. In the crystals of all the mutant complexes, the (GlcNAc)3 molecule, which is an inhibitor of wild-type lysozyme, had no inhibitory effect, but was hydrolysed as a substrate. One of the products, (GlcNAc)2, the reducing end of which is an alpha-anomer, was bound in an unproductive binding mode, protruding from the active-site cleft, and was able to act as an inhibitor. Hydrolysis of the synthetic substrate by the mutants occurred in a beta-anomer-retaining manner, and so the alpha-anomer product was converted from the beta-anomer product. Thus the interactions of Asp-101 and Trp-62 in subsite B are not essential for the catalytic mechanism, but co-operatively enhance the affinity of the substrate in the productive binding mode, other than the inhibitor in the unproductive mode.

Amino Acid Substitution↗
PubMed1998

Conformational sampling of CDR-H3 in antibodies by multicanonical molecular dynamics simulation.

The diversity in the lengths and the amino acid sequences of the third complementarity determining region of the antibody heavy chain (CDR-H3) has made it difficult to establish a relationship between the sequences and the tertiary structures, in contrast to the other CDRs, which are classified by their canonical structures. Enhanced conformational sampling of two different CDR-H3s was performed by multicanonical molecular dynamics (multicanonical MD) simulation while restricting the base structures, with and without the other surrounding CDR segments. The results showed that the multicanonical MD sampled a much larger conformational space than the conventional MD, independent of the initial conformations of the simulations. When the other CDRs surrounding the CDR-H3 segments were included in the calculations, the predominant conformations at 300 K corresponded to the X-ray crystal structures. When only the single CDR-H3 loops were considered with the restricted base structures, a greater number of different conformations were sampled as putative loops, but only a small number of stable conformations appeared at 300 K. Analyses of the resultant conformations revealed a structural role for the glycine, when it is located at position three residues before the last residue of CDR-H3 (Gly-X-X-last residue), coincident with the statistical tendencies of many antibody crystal structures. This reflects the general consistency between the energetically stable conformations and the empirically observed conformations. The current method is expected to be applicable to the structural modeling and the design of antibodies, especially for the inherently flexible loops.

Algorithms↗
PubMed1997

Surface of bacteriorhodopsin revealed by high-resolution electron crystallography.

Bacteriorhodopsin is a transmembrane protein that uses light energy, absorbed by its chromophore retinal, to pump protons from the cytoplasm of bacteria such as Halobacterium salinarium into the extracellular space. It is made up of seven alpha-helices, and in the bacterium forms natural, two-dimensional crystals called purple membranes. We have analysed these crystals by electron cryo-microscopy to obtain images of bacteriorhodopsin at 3.0 A resolution. The structure covers nearly all 248 amino acids, including loops outside the membrane, and reveals the distribution of charged residues on both sides of the membrane surface. In addition, analysis of the electron-potential map produced by this method allows the determination of the charge status of these residues. On the extracellular side, four glutamate residues surround the entrance to the proton channel, whereas on the cytoplasmic side, four aspartic acids occur in a plane at the boundary of the hydrophobic-hydrophilic interface. The negative charges produced by these aspartate residues is encircled by areas of positive charge that may facilitate accumulation and lateral movement of protons on this surface.

Bacteriorhodopsins↗
PubMed1996

Structural classification of CDR-H3 in antibodies.

Large varieties in the lengths and the amino acid sequences of the third complementarity determining region of the antibody heavy chain (CDR-H3) have made it difficult to establish a relationship between the sequences and the tertiary structures, in contrast to the other CDRs, which are classified by their canonical structures. A total of 55 CDR-H3 segments from well determined crystal structures were analyzed, and we have derived several remarkable rules, which could partly govern the CDR-H3 conformation dependence on the sequence. Since the rules are physically reasonable, they are expected to be applicable to structural modeling and design of antibodies.

Amino Acid Sequence↗
PubMed1996

Interaction of the basic protrusion of Escherichia coli ribonuclease HI with its substrate.

In order to determine the actual distance between the active site and the substrate binding site, termed the basic protrusion, of Escherichia coli ribonuclease HI, synthetic oligonucleotide duplexes with gradually extended overhangs were used, in which the enzymatic cleavage was restricted to a single site with 2'-O-methylnucleosides. The affinity of the enzyme for each substrate was determined by kinetic analysis. It was found that the affinity increased markedly when one nucleotide was attached to the 3' end of the DNA strand of the nine-base-pair hybrid duplex and then increased slightly as the DNA strand was extended further, whereas elongation of the strand in the other direction caused no change. When a mutant enzyme, in which three lysine residues in the basic protrusion were altered to alanine, was used, no increase in the kcat/K(m) value was observed. The results indicate that, for the productive binding, the axis from the 3' to the 5' end of the RNA strand of the substrate duplex must be oriented in agreement with the direction from the active site to the basic protrusion of the enzyme. The distance between the active site and the basic protrusion in the enzyme-substrate complex was shorter than that anticipated in modeling studies. A dynamic structure refinement, referred to as the normal mode analysis, was carried out in order to simulate the fluctuations of the basic protrusion.

Escherichia coli↗
PubMed1996

Tailoring echistatin to possess higher affinity for integrin alpha(IIb)beta(3).

A mutant of echistatin, a disintegrin with a high affinity for the integrins, was constructed by substituting CRGDC for ARGDD in the Arg-Gly-Asp (RGD) region. The mutant was chemically synthesized, subjected to a folding process with air oxidation, and purified by reverse-phase HPLC. The peptide mapping and mass spectrometric analyses revealed that the two Cys residues introduced in the mutant are linked to each other, without any effect on the mode of the four disulfide bonds present in native echistatin, as expected. The mutant strongly inhibited the binding of human fibrinogen to its receptor, integrin alpha(IIb)beta(3) with an IC(50) value of 0.12 nM. This value shows that the mutant is twice as potent as the native form (IC(50) = 0.23 nM). These results indicate that the native disintegrin molecule, which has been considered to possess the optimum affinity for the integrins, can be tailored to exhibit even higher affinity by introducing the conformational constraint into the RGD region. Monte Carlo simulations of KRCRGDCMD, the RGD region in the mutant, suggested that the disulfide bond constrains the RGD region to assume a type II' beta-turn, with Gly and Asp in positions 2 and 3 of the turn.

Amino Acid Sequence↗