Search PubMed⌕ Search

Biomedical subjects

A Giunti

Publications and source records attributed to A Giunti.

At least 19 recordsLinked to original sources
PubMed1997

Biomechanical validation of a new nail-plate for the repair of stable proximal femoral fractures.

The mechanical performance and the stress shielding effects of the Howmedica Spherolock MKII implant were evaluated. Three types of stable proximal femoral fractures were created in composite femurs and fixed with the nail-plate. The femurs were loaded to failure, and the yield strength, stiffness, and failure modes were noted. Additional intact composite femurs were fitted proximally with strain gauges, and the strain was examined under load. The femurs then underwent intertrochanteric fracture, plating, and re-testing. Comparative analysis showed that while the Spherolock system is less strong and stiff than other commonly used implants, it provides excellent and uniform load transfer across the fracture site. Varus rotation of the femoral head under load tended to open the fracture gap and localize the resultant load medially. Stress shielding of the calcar was less than 25% of the applied load even in the worst case. This very low stress shielding behavior was attributed mainly to the implant's low stiffness.

Biomechanical Phenomena↗
PubMed1996

Anterior extraoral surgery to the upper cervical spine.

STUDY DESIGN: A series of 10 patients surgically treated with prevascular or retrovascular extraoral retropharyngeal approach to the upper cervical spine is examined. OBJECTIVES: In orthopedic surgery, retropharyngeal approach may replace the transoral surgery, obviating the risks of infection and the uncomfortable postoperative course of cases in which median labiomandibular glossotomy was used to accomplish complex bone reconstruction. SUMMARY OF THE BACKGROUND DATA: The transoral approach is reported in literature as the classical anterior access to the upper cervical spine that provides direct exposure for anterior decompression of the spinal cord. The risks, the surgical limits, and the postoperative difficulties of transmucosal access suggest the use of an anterior extraoral retropharyngeal approach in orthopedic surgery. METHODS: The series includes four neoplastic lesions (osteoma, aneurismal bone cyst, giant cell tumor, solitary metastasis), three retropharyngeal ossifications resulting from diffuse idiopathic skeletal hyperostosis, and a single case of os odontoideum, craniocervical malformation, and postlaminectomy kyphosis. RESULTS: At follow-up evaluation, all patients achieved a satisfactory outcome, with good clinical and radiographic results; nasotracheal intubation obviated the need for tracheostomy. The wide surgical exposure allowed reconstruction with iliac strut bone grafts and internal fixation in six patients, avoiding the need of a halo device. The only complications were four instances of transient palsies of the marginal mandibular branch of the facial nerve. CONCLUSIONS: In the anterior surgery of the upper cervical spine, the prevascular approach allows a wide surgical exposure, with visualization similar to that obtained with median labiomandibular glossotomy. The retrovascular approach is indicated in selected cases, such as tumor adjacent to the vertebral artery and C1-C2 arthrodesis with bilateral transarticular screws according to Barbour.

Adolescent↗
PubMed1996

Design-related fretting wear in modular neck hip prosthesis.

An accelerated cyclic loading corrosion test was used to determine the corrosion behavior of a commercial (GSP) and a prototype titanium hip prosthesis each with a modular neck. Four GSP and four prototype stems were subjected to a 2-Hz cyclic load ranging between 200 and 2,100 N for 1,000,000 cycles. Three stems were tested in an environment of FeCl3 solution, three stems were tested in Ringer's solution, and two stems were tested in air. After cyclic loading, the specimens were carefully examined with optical and scanning electron microscopy (SEM). None of them showed macroscopic or microscopic signs of corrosion, regardless of the environment to which the specimens were subjected. However, macroscopic evidence of mechanical fretting was present at the neck-stem modular junction, primarily concentrated at the medial contact point between stem and neck, especially for the prototype stems. SEM analysis confirmed these observations. The appreciable differences observed between the two designs suggest that the problem can be minimized or eliminated with an accurately designed taper fitting.

Chlorides↗
PubMed1996

[Femoral densitometry as potential preoperative indicator for cementation of hip prosthesis].

This work suggests a densitometric protocol for femoral studies in arthrosic patients candidate to total hip arthroplasty. The protocol was applied retrospectively to 60 cases to investigate its possible future use as a tool for the preoperative planning of prosthetic stem fixation techniques-i.e., cemented vs. uncemented. The well-known standard procedures for femoral densitometric studies by dual-energy X-ray absorptiometry (DXA), are usually applied to the femoral neck, Ward's triangle and the greater trochanter. Unfortunately, these analyses lose their significance if applied to arthrosic hips, and arthrosis is the main condition requiring total hip arthroplasty. Our protocol for femoral studies in arthrosic patients includes the preoperative analysis of 7 regions of interest in the proximal shaft, similar to Gruen's regions. In vivo precision tests show variation coefficients ranging 0.9-3.7%. The protocol was applied to a series of 60 arthrosic patients who were submitted to total hip arthroplasty by the same surgical staff. Twenty of them were implanted a cemented stem and the other 40 an uncemented ("press-fit") stem. Densitometric results were communicated only after surgery, to avoid any bias on the normal decision-making process usually used to choose the fixation technique for the prosthetic stem. The two groups of cemented vs. uncemented stems had different distribution of densitometric values. Therefore, the information obtained with femoral densitometric studies preoperatively can play a major role in the choice between cemented and uncemented stems. Moreover, if femoral densitometric studies are carried out preoperatively, their results can be closely related to periprosthetic tissue remodeling and implant follow-up.

Adult↗
PubMed1995

Effects of some technological aspects on the fatigue strength of a cementless hip stem.

Four prototype cementless hip stems were tested following the ISO 7206 protocol for the assessment of the endurance properties and compared with a cast Cr-Co-Mo (ASTM F75) commercially available stem which was used as reference design. All the tested stems were similar in shape and size, but with some substantial differences. The first was made of forged Ti6A14V alloy (ASTM F136). The second, made of the same material, featured a central hole intended to reduce the bending stiffness of the stem itself. The third was identical to the second but for a small tooling notch in one of the fillets of the hole. The fourth was similar to the first but had a coating of sintered titanium beads in the proximal part. All of these modifications were made to evaluate the effect of fatigue strength of intentional or unintentional features commonly found in commercial stems. The forged Ti6A14V allow was found to be substantially stronger than the cast ASTM F75 Cr-Co-Mo alloy. However, tooling notches or sintered coatings were found to dramatically reduce this strength. Thus, the Ti6A14V alloy calls for an accurate design process, especially when complex shapes or sintered structures are required.

Alloys↗
PubMed1995

Influence of thigh muscles on the axial strains in a proximal femur during early stance in gait.

This work is focused on the in vitro simulation of the loads occurring in the femur during early stance in gait, for hip prosthesis stress shielding test purposes. Ten thigh muscles (the three gluteal muscles, the three vasti, rectus femoris, adductor longus and magnus, biceps femoris), simulated by nylon straps, were tested in order to establish their influence on the strains in the proximal femur. Axial and hoop strains were recorded from 16 strain gauges for the effect of each muscle and compared to the strains recorded as a result of the hip joint reaction force only (i.e. without muscle simulation). It appears that the three glutei are the principal muscles in determining the vertical strains, however the rectus femoris, biceps femoris and the adductors were also seen to significantly affect the strain pattern. The inadequacy of increasing the adduction angle and applying the resultant force at the hip joint to simulate the abductors was also confirmed.

Femur↗
PubMed1995

A computerized system for radiographical evaluation in total hip arthroplasty.

In the field of orthopaedic surgery radiographical image evaluation is frequently used to determine possible pathological processes. For total hip arthroplasty in particular, it is important to evaluate both preoperative femoral morphology and post-operative prosthesis performance in terms of bone adhesion to the implant and, consequently, loosening or stability of prosthesis components. References to a method called Roentgen stereophotogrammetric analysis (RSA) exist in the literature; however, the authors note that this method is expensive and requires the insertion of markers during the operation. Here we present an alternative computerized method for radiographical evaluation which we call radiographical evaluation system in total hip arthroplasty (RESTHA). The accuracy and the repeatability of the method have been evaluated using a medium-sized pelvis-femur system made of composite material. A mean error of +/- 2 mm has been associated to each experimental point. A post-operative inquiry case study is presented to indicate the applicability of the method.

Computers↗
PubMed1994

Bone demineralization induced by cementless alumina-coated femoral stems.

The biologic compatibility of ceramic materials has been widely demonstrated, and alumina (Al2O3) has been used extensively in clinical applications for nearly 20 years. The authors examined the behavior of bone tissue adjacent to the alumina coating in eight cementless hip prosthetic stems that appeared radiologically stable and were explanted because of pain. Histologic evaluation demonstrated the presence of a consistent layer of decalcified bone tissue in continuity with and parallel to the prosthetic interface. Based on laboratory findings, the authors attribute this demineralization phenomenon to a high local concentration of aluminum ions with metabolic bone disease, which is histologically comparable to the osteomalacic osteodystrophy described in dialysis patients. These findings must be carefully considered given the potential long-term implications for alumina-coated implants.

Aged↗
PubMed1994

Automatic fracture reduction with a computer-controlled external fixator.

The reduction of fractures by means of an Ilizarov's fixator is obtained by successively shortening or lengthening the rods. This entails that all reduction operations of the fracture stumps be performed with a series of empirical attempts, requiring great experience and manual dexterity in the surgeon. Moreover this process involves a long exposure of both physician and patient to potentially harmful radiation due to the continuous checking of the intermediate positions on the X-ray image intensifier. In order to overcome these limits a new device has been conceived, based on the application of three stepper-motors on three-rods. Its basic principle is functionally very similar to Ilizarov's prototype. The relative motions between the two frames are carried out by controlling the three actuators with a computer, which processes the number of required steps on the basis of an algorithm, starting from a few inputs supplied by the surgeon. This article illustrates the functional kinematic study necessary for the complete automation of the reduction process. Also considered is the complex problem of the reduction trajectory definition, intended as a sequence of configurations of partial correction, obtained by formalizing in geometrical terms the empirical criteria followed by the orthopaedic surgeon in reducing fractures. Such a sequence is intended to be a suggestion for the surgeon who can visualize and possibly interact with the system to determine a trajectory harmless for the soft tissues surrounding the bone.

External Fixators↗
PubMed1994

Incidence of intraoperative femoral fracture. Straight-stemmed versus anatomic cementless total hip arthroplasty.

The authors report the incidence of intraoperative femoral fractures (16 cases) occurring during the course of 395 cementless total hip arthroplasties performed at the Rizzoli Orthopaedic Institute between November, 1980 and June, 1991. The straight stem (Lord prosthesis) caused an intraoperative fracture in 18% of the cases, whereas the anatomic stem (An.C.A.) caused a fracture in only 1.5% of the cases. An intraoperative fracture occurred in 13% of patients with osteoporosis and only in 1.4% of those with normal mineralization of the proximal femur. Seven cases required circlage wiring; one was treated with interfragmentary screws (in the diaphysis). The remaining patients were treated with casting or delayed weight-bearing. Fifteen fractures consolidated within an average of 10 weeks. One case treated with circlage wiring and screws resulted in a nonunion. After 7 months, internal fixation with a plate and screws was performed with consolidation 5 months later. All stems were radiographically stable at an average follow-up of 40 months.

Female↗
PubMed1993

Digital dynamic range expansion applied to X-ray densitometric analysis of total hip replacement.

Due to the presence of the stiff prosthetic stem fitted in the medullary canal during total hip replacement, the surrounding cortex of the femur changes its density over time. This bone remodelling takes place with every type of total hip prosthesis; however, its intensity may vary between prostheses and patients. In the worst cases this process can lead to the late failure of the implant. To monitor such bone density evolution, we are developing a tailored Computer-aided Densitometric Image Analysis system (the major part of this our system uses an 8-bit commercial hardware with 256 levels of grey). The equivalent dynamic range of an X-ray picture is about 10 bits. In this paper we present a method to overcome these hardware limitations by improving the software. Using a double-exposure acquisition it is possible to build a 9-bit image that is good enough for most applications involving bone density measurement.

Absorptiometry, Photon↗
PubMed1993

A software simulation of tibial fracture reduction with external fixator.

In modern orthopaedic practice, circular external fixators are frequently preferred to plaster cast for various reasons. The realignment of the two fractured bone segments is usually performed under a continuous fluoroscopy checking which involves a long radiation exposure time for both patients and surgeon. In order to overcome this problem, a computer controlled external fixator is under development. One relevant problem which this project faced in its initial stage was the difficulty to define in geometrical terms the manual reduction trajectory normally adopted by the surgeon. Basically it was a typical problem of empirical knowledge transfer from the surgeon to the engineer. Thus, it was necessary to create a common ground where the two experts could carry out the necessary analyses in order to define an empirical algorithm capable of suggesting a correction trajectory. The problem was solved by developing a simulation program called S.E.R.F. (Simulation Environment of a Robotic Fixator) provided with an extremely powerful graphic output, able to visualize the whole reduction trajectory from any viewpoint in space. The authors suggest the use of this kind of tool every time the techno-clinical information exchange is a critical issue.

Algorithms↗
PubMed1993

The role of surgical therapy in patients with nonmetastatic Ewing's sarcoma of the limbs.

Of 131 patients with primary Ewing's sarcoma (ES) with extremity locations, treated between April 1972 and May 1987, 13 had amputation; 56 had a local resection with 31 (55%) requiring radiation therapy (RT) as an adjuvant to local therapy. Sixty-two of 131 patients (47%) had RT only. Local recurrences were reported in 5% of patients treated with surgery alone, 1% of the group treated with surgery and radiation therapy, 24% of patients treated with radiation therapy alone (46% for cesium-radiation therapy, and 12% with cobalt-radiation therapy).

Adolescent↗
PubMed1992

Microradiographic and histochemical evaluation of mineralization inhibition at the bone-alumina interface.

Microradiographic and histochemical tests were used to examine the behaviour of the bone tissue close to the alumina coating in cementless hip prostheses which were radiologically stable and explanted because of pain. The presence was detected of a decalcification stripe of the bone tissue with a thickness of about 300 microns, parallel to the prosthesis profile and in appearance not influenced by the roughness of the surface. This phenomenon was attributed to the presence of aluminium ions similarly to what happens in osteomalacic osteodystrophy in nephropathic dialysed patients. It was concluded that the phenomenon must be carefully considered because, in the long term, it could cause failure in the alumina coating.

Aluminum↗
PubMed1990

Arthroprosthetic reimplantation with bioceramics.

The study analyzes the results obtained in 50 cases of arthroprosthetic substitution surgery performed as a result of "aseptic detachment of the implant"; it involves a consecutive series of operations performed between 1979 and 1983. In all of the cases ceramic-ceramic cemented prostheses were implanted. The results, which were generally satisfactory, confirmed the excellent properties of alumina (low wear, elevated tolerance).

Adult↗
PubMed1989

Neoadjuvant chemotherapy for localized Ewing's sarcoma of the extremities: preliminary results of a protocol which uses surgery (alone or followed by radiotherapy) for local control.

From June 1983 to December 1985, thirty-eight patients with localized Ewing's sarcoma of the extremities were treated with a protocol that consisted of an initial nine week period of polychemotherapy (vincristine, adriamycin and cyclophosphamide) followed by local therapy and additional chemotherapy (vincristine, adriamycin, cyclophosphamide and dactinomycin) for one year. As local treatment all patients were offered surgery; thirty-two accepted and six refused. These six patients were locally treated with radiotherapy alone (50 Gy). In the remaining patients an amputation was performed in one case and a resection in thirty-one. In resected patients when a wide margin was achieved (24 cases) no further local treatment was performed; when it was marginal (5 cases) or intralesional (2 cases) radiotherapy at lower doses (40 Gy) followed. At mean follow-up of thirty-seven months the percentage of continuously disease-free patients was 50% for those treated with radiotherapy, 76% with surgery, and 85% with surgery and radiotherapy. Eight patients developed metastatic disease and two patients had local recurrence and metastases. The local recurrences were seen in one patient locally treated with surgery and in one locally treated with radiotherapy. Nine major local complications were observed: three in patients treated with radiotherapy, five in patients treated with surgery, and one in a patient treated with surgery and radiotherapy. These results indicate that after induction chemotherapy conservative surgery is possible in almost all cases of Ewing's sarcoma of the extremities and that such treatment is better than radiotherapy alone as local therapy.

Adolescent↗