Search PubMed⌕ Search

Biomedical subjects

A F Ayoub

Publications and source records attributed to A F Ayoub.

At least 19 recordsLinked to original sources
PubMed2005

Skeletal stability after correction of maxillary hypoplasia by the Glasgow extra-oral distraction (GED) device.

Maxillary distraction osteogenesis delivers excellent results, particularly in patients with clefts. In the past, devices such as the conventional facemask and the rigid external distraction device have been used to correct maxillary hypoplasia after a Le Fort I osteotomy. We describe a new device, the Glasgow extra-oral distraction device. The extent of skeletal and dental stability of corrections achieved in 10 patients with maxillary hypoplasia associated with clefts was satisfactory. This device costs little, can be produced in developing countries, and provides effective treatment for severe secondary deformity associated with clefts.

Adult↗
PubMed2005

Mandibular elongation by automatic distraction osteogenesis: the first application in humans.

We report the case of a 65-year-old man who was the first person to have the right ramus of his mandible lengthened by 20mm by automatic continuous distraction osteogenesis. The device consists of two units: a component that is implanted into the bone, and an external component that is distant from the surgical site and mounted on a battery-driven portable syringe driver or infusion pump. A non-compressible drive cable connects the two.

Aged↗
PubMed2005

Patients' responses to distraction osteogenesis: a multi-centre study.

This investigation aimed to compare and contrast practical difficulties experienced by 54 children from three different centres (Mexico City, New York, Paris) treated with either extra-oral or intra-oral distraction devices. The possible effect of distraction osteogenesis on pain/sleeping difficulty, speech and eating problems and disturbance of recreational activities and alteration in sensation were investigated. It was expected that intra-oral devices would reduce the difficulties associated with the distraction process and their psychological effect on the child. Some benefits resulting from the use of intra-oral devices were identified, these included fewer sleeping problems (P = 0.006) and less disturbance of recreational activities (P = 0.002). However, eating and maintaining oral hygiene were more problematic with intra-oral devices the differences between the intra-oral and extra-oral groups was approaching significance at P = 0.07. A major disadvantage of the extra oral device was scarring. In both groups the alteration of lip sensation was temporary, pain was limited to the time of activation of the distraction device. A high level of patients' cooperation was mandatory for successful completion of the treatment.

Adolescent↗
PubMed2005

Methods of assessment of cleft-related facial deformity: a review.

OBJECTIVE: To review the stimulus media, measurements and scoring system, rater's characteristics, and facial region used in assessment of the appearance of cleft-related deformity. METHODS: A review of the literature was conducted using MedLine from January 1966 to June 2003. Key orthodontic journals and The Cleft Palate-Craniofacial Journal were hand searched as well. RESULTS: Most studies used a static two-dimensional means of assessment. Direct clinical assessment, three-dimensional media, or both have been used to a lesser extent. Only one study utilized all three assessment media. Three studies, however, attempted to compare the direct clinical assessment with that obtained using two-dimensional media. Most of the studies demonstrated that appearance of the cleft-related deformity could be measured by a variety of judges. The reliability and validity of the three different media as methods of assessment have received limited attention. The facial area assessed has varied from the full face, nasolabial area, or specific features of the lip or nose. CONCLUSIONS: Wide variation exists in the study design related to assessment of cleft-related deformity. An internationally agreed objective method of assessment for this facial deformity is required. A three-dimensional, rather than a two-dimensional, means of assessment should be adopted.

Cephalometry↗
PubMed2004

Histological assessment of bioengineered new bone in repairing osteoperiosteal mandibular defects in sheep using recombinant human bone morphogenetic protein-7.

UNLABELLED: Numerous experimental studies have been published about osteoinductive bone morphogenetic proteins (BMPs). However, to our knowledge there has been no detailed histological study of a mandibular defect in a large mammal, reconstructed using BMPs. We describe here the histological features of rhBMP-7-induced bone in mandibular defects in sheep. METHODS: A 35 mm osteoperiosteal defect was created at the parasymphyseal region of the mandible in six adult sheep. The continuity of the mandible was maintained using a bony plate, and rhBMP-7 was applied on a type I collagen carrier. Bone labels were injected at selected time intervals during the follow-up period. The animals were killed after 3 months and bone samples were examined histologically, histomorphometrically, and by fluorescence microscopy. RESULTS AND CONCLUSIONS: We found a mixture of woven and lamellar bone that contained many cells with large nuclei. This had not reorganised to form cortical bone and the rhBMP-7-induced bone was more porous than the native bone. The newly-formed bone restored both endosteal and periosteal layers. rhBMP-7-induced bone was biocompatible and induced no ossification of soft tissue or abnormal growth of nearby vital structures. The mineral apposition rate was 1.98 microm/day (range 0.62-5.63 microm/day), a value close to that reported in humans. This suggests that BMPs have a limited effect in accelerating the rate of mineralisation, but promote the pre-mineralisation processes, and perhaps the formation of woven bone.

Animals↗
PubMed2004

Applications of 3D imaging in orthodontics: part I.

Part I of this paper describes the background, general concepts, available techniques and the clinical applications of recording external craniofacial morphology in three dimensions. Part II explores the different 3D techniques of imaging the dental arches, and their possible uses in orthodontic diagnosis and treatment.

Cephalometry↗
PubMed2004

Mechanical testing of recombinant human bone morphogenetic protein-7 regenerated bone in sheep mandibles.

A new method was developed in this study for testing excised sheep mandibles as a cantilever. The method was used to determine the strength and stiffness of sheep hemi-mandibles including a 35 mm defect bridged by regenerated bone. Recombinant human bone morphogenetic protein-7 (rhBMP-7) in a bovine collagen type-I carrier was used for the bone regeneration. Initial tests on ten intact sheep mandibles confirmed that the strength, stiffness and area beneath the load-deformation curves of the right and left hemi-mandibles were not significantly different, confirming the validity of using the contra-lateral hemi-mandible as a control side. Complete bone regeneration occurred in six hemi-mandibles treated with rhBMP, but the quality and mechanical properties of the bone were very variable. The new bone in three samples contained fibrous tissue and was weaker and less stiff than the contra-lateral side (strength, 10-20 per cent; stiffness, 6-15 per cent). The other half had better-quality bone and was significantly stiffer and stronger (p < 0.05), with strength 45-63 per cent and stiffness 35-46 per cent of the contra-lateral side. Hemi-mandibles treated with collagen alone had no regenerated bone bridge suggesting that 35 mm is a critical-size bone defect.

Animals↗
PubMed2004

Facial characterization of infants with cleft lip and palate using a three-dimensional capture technique.

OBJECTIVE: To characterize the soft tissue features of infants with unilateral cleft lip (UCL) and unilateral complete cleft lip and palate (UCLP) prior to primary surgery and compare with noncleft controls. DESIGN: Prospective controlled capture of the facial morphology of infants using a noninvasive three-dimensional stereophotogrammetry method. PARTICIPANTS: 23 children with presurgical cleft: 11 UCL (M = 6, F = 5); 12 UCLP (M = 9, F = 3), and 21 noncleft controls (M = 7, F = 14) were imaged at approximately 3 months of age (range 10 to 16 weeks). MAIN OUTCOME MEASURE: Accurate, repeatable quantification of facial soft tissues in infants with clefts prior to surgery. RESULTS: Significant differences (p <.05) were found between the UCLP group and UCL and control groups in anatomical and soft nose width, cleft-side alar wing length, and nasal tip horizontal displacement. Both cleft groups were significantly different from controls and from each other in cleft-side nostril dimensions, alar wing angulation, columella angle, and alar base to corner of mouth dimension; alar base width; and soft tissue defect in nose and the lip and philtrum length bordering the cleft. Significant differences between clefts and controls were identified in the nostril and philtrum on the noncleft side. CONCLUSIONS: The use of children with UCL as controls for UCLP studies is inappropriate. This technique overcame the limitations of direct measurement of infant faces to aid the surgeon in the planning and subsequent re-evaluation of surgical rationale.

Analysis of Variance↗
PubMed2003

Preliminary assessment of skeletal stability after sagittal split mandibular advancement using a bioresorbable fixation system.

We studied skeletal stability during the first year after mandibular advancement and fixation with bioresorbable self-reinforced poly-L-lactide (SR-PLLA) screws in 11 patients by cephalometric measurements. We compared these with a cohort of 11 patients, in whom titanium screws were used for fixation. We found no significant difference between the two groups in the median preoperative cephalometric values and the median changes after operation. There was also no significant difference between the two groups regarding the median extent of relapse 1-year after operation. We conclude that bioresorbable SR-PLLA screws are comparable to metallic screws for fixation of bone after sagittal split mandibular advancement.

Absorbable Implants↗
PubMed2003

Facial asymmetry--3D assessment of infants with cleft lip & palate.

OBJECTIVES: To determine the degree of facial asymmetry in infants with unilateral cleft lip and/or palate, and quantify improvements following primary surgery, in three dimensions. DESIGN: The faces of 20 infants with unilateral clefts (10 UCL; 10 UCLP), and 20 age-matched, non-cleft controls, were captured using the C3D stereophotogrammetry system prior to primary lip/nose repair (at 3 months), at 6 months and at age 1 year. METHODS: Procrustes techniques were applied to 3D landmark configurations to its mirror image. Mean squared distances between landmarks and their antimeres were calculated and expressed as asymmetry scores for each 3D configuration. Full-face, nose and lip median scores were compared and changes with time evaluated (P < 0.01). RESULTS: There were no significant changes in asymmetry scores in the control group from 3 months to 1 year. The UCLP group was more asymmetric than the UCL group, displaying greatest improvement in nasal symmetry following primary repair. The lips continued to improve over time. The UCL group had significant nasal asymmetry, which did not appear to improve with primary surgery. CONCLUSIONS: Immediate improvement in asymmetry scores in children with UCLP is related to the production of a more symmetrical nasal form after primary surgery. In contrast, the nasal asymmetry seen in children with UCL is unchanged despite surgery. Full face asymmetry scores may mask subtle changes over time. Nasal and lip asymmetry should be considered individually.

Case-Control Studies↗
PubMed2003

Assessment of the accuracy of a three-dimensional imaging system for archiving dental study models.

OBJECTIVE: The use of stone and plaster study models is an integral part of any dental practice and is required for research. Storage of study models is problematic in terms of space and cost. Ayoub et al.(1) introduced a new technique based on the recent advances in stereophotogrammetry for archiving dental study models in a digital format. However, assessment of the accuracy of the generated three-dimensional (3D) models has not been carried out yet. It was the aim of this study to evaluate the accuracy of this technique. DESIGN: A comparative assessment between direct measurements of dental study models and measurements of computer generated 3D images of the same study models was performed. MATERIALS AND METHODS: Twenty-two dental study models stored at Glasgow Dental Hospital and School for the purposes of research were used in the study. The models were captured in three dimensions using a photostereometric technique and stored in digital format. MAIN OUTCOME MEASURES: Measurements were conducted directly on dental study models and on the computer generated 3D images using Euclidean Distance Matrix Analysis.(2) The difference between the two sets of measurements was statistically analysed using a two-sample t-test. RESULTS: The average difference between measurements of dental casts and 3D images was 0.27 mm. This difference was within the range of operator errors (0.10-0.48 mm) and was not statistically significant (P < 0.05). CONCLUSION: This study shows that it is possible to use 3D imaging to store dental study models for treatment monitoring and research with a satisfactory degree of accuracy.

Archives↗
PubMed2003

Are facial expressions reproducible?

OBJECTIVES: To determine the extent of reproducibility of five facial expressions. DESIGN: Thirty healthy Caucasian volunteers (15 males, 15 females) aged 21 to 30 years had 20 landmarks highlighted on the face with a fine eyeliner pencil. Subjects were asked to perform a sequence of five facial expressions that were captured by a three-dimensional camera system. Each expression was repeated after 15 minutes to investigate intrasession expression reproducibility. To investigate intersession expression reproducibility, each subject returned 2 weeks after the first session. A single operator identified 3-dimensional coordinate values of each landmark. A partial ordinary procrustes analysis was used to adjust for differences in head posture between similar expressions. Statistical analysis was undertaken using analysis of variance (linear mixed effects model). RESULTS: Intrasession expression reproducibility was least between cheek puffs (1.12 mm) and greatest between rest positions (0.74 mm). The reproducibility of individual landmarks was expression specific. Except for the lip purse, the reproducibility of facial expressions was not statistically different within each of the two sessions. Rest position was most reproducible, followed by lip purse, maximal smile, natural smile, and cheek puff. Subjects did not perform expressions with the same degree of symmetry on each occasion. Female subjects demonstrated significantly better reproducibility with regard to the maximal smile than males (p =.036). CONCLUSIONS: Under standardized conditions, intrasession expression reproducibility was high. Variation in expression reproducibility between sessions was minimal. The extent of reproducibility is expression specific. Differences in expression reproducibility exist between males and females.

Adult↗
PubMed2002

Response of patients and families to lengthening of the facial bones by extraoral distraction osteogenesis: a review of 14 patients.

Fourteen patients or their immediate family were interviewed about their experiences of having either unilateral or bilateral external distraction osteogenesis of the mandible. The patients showed a high level of co-operation with treatment. Six of the 14 patients required repeat distractions, and had been informed and accepted that this was a possibility before the initial distraction. However, patients or their parents expressed some reservations about the extraoral distractors, which prevented them from practising their favourite sport and made them vulnerable to bullying by their friends and colleagues. Patients had moderate pain when the appliances were removed. They all expressed their satisfaction with the results and would recommend this treatment to others. Problems, including speech, eating, pain, and sleeping difficulties, were encountered by patients at all stages of treatment. Of considerable concern was the disruption of education when the child was treated during the school term.

Absenteeism↗
PubMed2001

A new device for microincremental automatic distraction osteogenesis.

We have invented a distraction device that can be placed intraorally and provides autodistraction. The device consists of two units: an implantable component that is applied directly on the bone, and an external component that is distant from the surgical site. The external component is mounted on a standard, battery-driven portable syringe driver or infusion pump. A fine flexible non-compressible tube connects the two. The compression of the bellows in the external component causes fluid to be forced through the connecting tube into the distraction component. The combination of the sealed system and incompressible fluid guarantees expansion of the bellows of the distraction component and gradually separates the bone segments.

Electric Power Supplies↗
PubMed2001

Segmental mandibular reconstruction by microincremental automatic distraction osteogenesis: an animal study.

We investigated the reconstruction of a surgically created critical size mandibular defect in sheep using a newly developed automatic distraction device. The device has an implantable component, which is fixed to the mandible to allow the transfer of the transport disc across the created defect, and an external component which is mounted on the activation pump and secured away from the site of bone distraction. Compression of the bellows in the external component causes fluid to be forced through the connecting tube into the distraction component. Distraction at a rate of 1 mm over 24 h was achieved in six sheep. New bone generated at the site of the created defects both anterior (compression side) and posterior (tension side) to the transport disc and had similar radiodensity to the adjacent mandibular bone eight weeks after the completion of distraction.

Angiography↗
PubMed2001

Complications following orthognathic surgery that required early surgical intervention: fifteen years' experience.

The aim of this study was to assess complications following various orthognathic surgical procedures that required early surgical intervention. This study was carried out on 821 patients who had undergone surgical treatment for correction of dentofacial deformities between 1985 and 2000. Only patients who required a second procedure to deal with immediate or early postoperative complications (i.e., those occurring within 4 weeks of surgery) were investigated in this study. Twelve patients underwent a second surgical procedure; 9 had undergone conventional osteotomy surgery, and 3 had undergone distraction osteogenesis. Three Le Fort I cases had to be further impacted and repositioned, and 4 vertical subsigmoid osteotomies had to be reexplored. The details of the complications are presented, and possible methods by which these problems could be reduced and/or prevented are discussed.

Adolescent↗
PubMed2000

Evaluation of skeletal stability following surgical correction of mandibular prognathism.

This retrospective study was designed to assess skeletal stability after the correction of mandibular prognathism by sagittal split osteotomy (SSO) and intraoral vertical subsigmoid osteotomy (VSO). We used lateral cephalographs of 31 patients taken before, immediately after, and at least one year after the operation. We recorded euclidean distance matrix analysis, linear and angular measurements, and x and y co-ordinates of cephalometric landmarks for each cephalograph. There were no significant differences in extent of the mandibular retrognathia or magnitude of change between the two groups. The main significant changes in both groups were reduction of the total mandibular length, and posterior shifting in the mandible. One year after the operation the main change was the mean forward relapse of 2.5 mm in the SSO group and the mean posterior relapse of 0.5 mm in the VSO group. The difference in skeletal stability between the groups was significant (P< 0.05), and we conclude that VSO is the more effective technique for correcting mandibular prognathism.

Adolescent↗