Search PubMed⌕ Search

Biomedical subjects

A C Fernandes

Publications and source records attributed to A C Fernandes.

At least 19 recordsLinked to original sources
PubMed2006

Phase behaviour of stearic acid-stearonitrile mixtures. A thermodynamic study in bulk and at the air-water interface.

The solid-liquid phase behaviour of stearic acid (SA) and stearonitrile (SN) in binary mixtures was investigated by differential scanning calorimetry (DSC), and the formation of SA-SN mixed monolayers at the air-water interface was followed by surface pressure-area (pi-A) measurements and by Brewster angle microscope (BAM) observation. The solid-liquid phase diagram is a eutectic type phase diagram, with the eutectic composition 0.90<X(SN)<0.95 and T(eut)=40.9 degrees C. The DSC results also suggest that the two components are immiscible in the solid phase but form a liquid mixture with positive deviations to the ideal behaviour. At the air-water interface, the two components form liquid condensed monolayers in the entire range of compositions, at low surface pressures, while solid mixed monolayers only form at high surface pressures for X(SN)<0.8. Thermodynamic analysis indicates that SA and SN are miscible in the liquid condensed phase, with negative deviations from the ideal behaviour. The variation of the collapse surface pressure of mixed monolayers also indicates miscibility at the air-water interface.

Air↗
PubMed2006

Dosimetry at the Portuguese research reactor using thermoluminescence measurements and Monte Carlo calculations.

This work presents an extensive study on Monte Carlo radiation transport simulation and thermoluminescent (TL) dosimetry for characterising mixed radiation fields (neutrons and photons) occurring in nuclear reactors. The feasibility of these methods is investigated for radiation fields at various locations of the Portuguese Research Reactor (RPI). The performance of the approaches developed in this work is compared with dosimetric techniques already existing at RPI. The Monte Carlo MCNP-4C code was used for a detailed modelling of the reactor core, the fast neutron beam and the thermal column of RPI. Simulations using these models allow to reproduce the energy and spatial distributions of the neutron field very well (agreement better than 80%). In the case of the photon field, the agreement improves with decreasing intensity of the component related to fission and activation products. (7)LiF:Mg,Ti, (7)LiF:Mg,Cu,P and Al(2)O(3):Mg,Y TL detectors (TLDs) with low neutron sensitivity are able to determine photon dose and dose profiles with high spatial resolution. On the other hand, (nat)LiF:Mg,Ti TLDs with increased neutron sensitivity show a remarkable loss of sensitivity and a high supralinearity in high-intensity fields hampering their application at nuclear reactors.

Algorithms↗
PubMed2006

Photon and fast neutron dosimetry using aluminium oxide thermoluminescence dosemeters.

Al(2)O(3):Mg,Y thermoluminescence (TL) dosemeters were used to measure photon and fast neutron doses in a fast neutron beam recently implemented at the Portuguese Research Reactor, Nuclear and Technological Institute, Portugal. The activation of Al(2)O(3):Mg,Y by fast neutrons provides information about the fast neutron component by measuring the activity of the reaction products and the self-induced TL signal. Additionally, the first TL reading after irradiation determines the photon dose. The elemental composition of the dosemeters was determined by instrumental neutron activation analysis and by particle induced X-ray emission. Results demonstrate that Al(2)O(3):Mg,Y is an adequate material to discriminate photon and fast neutron fields for reactor dosimetry purposes.

Aluminum Oxide↗
PubMed2006

The simple SDD.

We describe the fabrication and characterisation of the SIMPLE superheated droplet detector, a 10 g active mass device of C(2)ClF(5) in 1-3% weight concentrations currently employed in a direct search for spin-dependent astroparticle dark matter candidates.

Chlorofluorocarbons, Methane↗
PubMed2005

Neutron spectrometry with large volume, heavy-loaded superheated droplet detectors: a simple spin-off.

SIMPLE is a superheated droplet detector (SDD) experiment designed to search for the evidence of spin-dependent weakly interacting neutralino dark matter (WIMPs). SDDs, a type of emulsion detector, consist of a uniform suspension of superheated liquid droplets in a compliant material such as a polymeric or aqueous gel. We report on the first neutron spectrometry experiments with SIMPLE SDDs, a spin-off of the neutron detector calibrations performed at the Portuguese Research Reactor. SIMPLE SDDs differ from most SDDs available commercially as they have a 10 times higher loading factor, containing 10(3) times more freon than their commercial counterparts and a 100 times larger volume. We have analysed the response of SIMPLE SDDs to two quasi-monochromatic neutron beams of energies 54 and 144 keV obtained with passive filters. Results show that the characteristic peaks in the fluence distribution of both filters could be determined and their energy position obtained using a simple thermodynamic relation.

Equipment Design↗
PubMed2004

Development of equipments for determination of BNCT source spectral parameters.

The knowledge of neutron and gamma ray energy spectra can strongly influence the BNCT information about delivered dose to target volume as well as to the surface healthy tissue region. This region is very often decisive to stay within the recommended healthy tissue limit. Modification of neutron Bonner spectrometer to one block i.e. Bonner spectrometer monoblock (BSM) and gamma ray Si semiconductor spectrometer are being developed and verified in real conditions of LVR-15 reactor beam. Test measurements were also carried out in conditions of known standard spectra. The accepted procedure and the first results documenting the sensitivity BSM to different spectra are presented.

Boron Neutron Capture Therapy↗
PubMed2004

Thermoluminescence dosimetry of a thermal neutron field and comparison with Monte Carlo calculations.

The characteristics of thermoluminescence dosemeters (TLDs) regarding the determination of photon and neutron absorbed doses were investigated in a thermal neutron beam. Harshaw TLD-100 (LiF:Mg,Ti) and TLD-700 (7LiF:Mg,Ti) were compared with similar materials from Solid Dosimetric Detector and Method Laboratory (People's Republic of China). Harshaw TLD-700H (7LiF:Mg,Cu,P) and aluminium oxide (Al2O3:Mg,Y) from Hungary were also considered for photon dose measurement. The neutron sensitivity of the investigated materials was measured and found to be consistent with values reported by other authors. A comparison was made between the TL dose measurements and results obtained via conventional methods. An agreement within 20% was obtained, which demonstrates the ability of TLD for measuring neutron and photon doses in a mixed field, using careful calibration procedures and determining the neutron sensitivity for the usage conditions.

Aluminum Oxide↗
PubMed2003

Mineralisation of two phosphate ceramics in HBSS: role of albumin.

The role of albumin in the mineralisation process of commercial hydroxyapatite (HAp) and synthesised biphasic (HAp-tricalcium phosphate) ceramics in a bufferless simulated inorganic plasma (HBSS) was investigated by conventional in vitro tests and static and dynamic wettability measurements. Albumin was either pre-adsorbed or solubilised in HBSS. It was found that calcium complexation by albumin plays a key role in early mineralisation kinetics, so that mineralisation is favoured when albumin is pre-adsorbed and hindered when it is dissolved in HBSS. In the biphasic ceramic this picture is complicated by the fact that albumin, in solution, seems to promote the dissolution of tricalcium phosphate, and simultaneously compete for calcium with the ceramic. It also appears that albumin has a stabilising effect of octacalcium phosphate present in deposits on commercial HAp. The same effect may be present in the case of the biphasic ceramic, at earlier mineralisation times, when octacalcium phosphate appears as a precursor of HAp. Octacalcium phosphate formation on commercial apatite is accompanied by carbonate substitution in phosphate positions.

Albumins↗
PubMed2002

In vitro mineralization of a glass-ceramic of the MgO-3CaO x P2O5-SiO2 system: wettability studies.

The calcium phosphate deposition on the surface of a bioactive glass-ceramic of the MgO-3CaO. P(2)O(5)-SiO(2) system during a 1-week immersion in biological model fluids, was investigated through wettability studies. Two model fluids with chemical composition similar to the human blood plasma were tested: Hanks' balanced salt solution (HBSS) and a simulated body fluid (SBF) with a higher calcium content. The effect of the presence of albumin, both in solution or previously adsorbed to the surface, was assessed. The behavior observed using two SBF solutions prepared with and without TRIS buffer was compared. The surface free energy of the glass-ceramic samples was determined, before and after immersion, and dynamic contact angle analysis was performed using the biological model fluids as scanning liquids. Scanning electron microscope observations and x-ray photoelectron spectroscopy (XPS) analysis were performed to complement the wettability studies. The experimental results led to the conclusion that the precipitation of a calcium phosphate film in HBSS occurred mainly when the immersion solution was renewed daily or in the presence of adsorbed albumin. In SBF, the addition of TRIS buffer seemed to inhibit the formation of the calcium phosphate film.

Biocompatible Materials↗
PubMed2002

Reproducibility of TL measurements in a mixed field of thermal neutrons and photons.

The reproducibility of measurements performed with GR-100 (LiF:Mg,Ti) from the Solid Dosimetric Detector and Method Laboratory (DML) China, GR-107 (7LiF:Mg,Ti, DML), TLD-700H (7LiF:Mg.Cu,P, Harshaw) and Al2O3:Mg,Y (Hungary) in photon and mixed photon-neutron fields was investigated. Mixed-field irradiations were performed in a thermal neutron field generated at a nuclear reactor. GR-100 sensitivity decreased after mixed-field irradiations, while no significant change was found for the other materials. Using GR-100 for the dosimetry of mixed and high-intensity fields requires careful procedures.

Aluminum Oxide↗
PubMed2000

Calcium phosphate deposition on titanium surfaces in the presence of fibronectin.

Titanium implants are known to nucleate spontaneously a calcium phosphate (apatite-like) layer when in contact with biological model fluids. The presence of proteins either in solution or pre-adsorbed on the titanium surface may influence the process of calcium phosphate deposition. The role of fibronectin, a protein known to promote cell adhesion in spite of its low concentration in biological fluids, was dissolved in Hanks' balanced salt solution (HBSS) and investigated. Several techniques of surface analysis, namely wettability, XPS, and SEM studies, were applied. The concentration of fibronectin in the HBSS solution was an important parameter in the process of calcium phosphate deposition. Concentrations as low as 0.01 mg/mL did not significantly affect the ionic precipitation; however, if the protein concentration was increased to 0.05 mg/mL, a value still far below the concentration in blood (0.2 mg/mL), the formation of a calcium phosphate layer was strongly inhibited. The influence of fibronectin pre-adsorbed on titanium surface also was investigated. It was found, as in the first case, that the extent of ionic precipitation that occurred during the immersion in HBSS depended on the protein concentration in the NaCl solution used to pre-immerse the titanium sample.

Animals↗
PubMed1999

Bovine serum albumin adsorption on titania surfaces and its relation to wettability aspects.

The adsorption of bovine serum albumin (BSA) from sodium chloride solution and Hanks' balanced salt solution (HBSS) onto TiO2-silicon surfaces is studied by reflectometry in stagnation point flow. The results are compared with those obtained by dynamic contact-angle (DCA) analysis of titanium substrates. The adsorption isotherms show that the adsorbed amount of protein always is lower in HBSS, that is, in the presence of calcium and phosphate ions. This may be related to the increase in surface hydrophilicity caused by these ions, as suggested by the authors in previous works. The rate of adsorption also is lower in HBSS solutions. Comparison of the initial adsorption rates with the rate of mass transfer to the surface reveals that in both solvents only a small fraction of the protein that arrives at the surface adsorbs onto it. Electrostatic and/or conformational effects can explain the energy barrier to adsorption. The DCA analysis of high concentration (4 mg/mL) protein solutions shows a strong reduction of the contact-angle hysteresis, both in HBSS and in NaCl solutions, which confirms that the immediate adsorption of the protein to the surface forms a stable, hydrophilic film.

Adsorption↗
PubMed1999

Homologous xylanases from Clostridium thermocellum: evidence for bi-functional activity, synergism between xylanase catalytic modules and the presence of xylan-binding domains in enzyme complexes.

Clostridium thermocellum produces a consortium of plant-cell-wall hydrolases that form a cell-bound multi-enzyme complex called the cellulosome. In the present study two similar xylanase genes, xynU and xynV, were cloned from C. thermocellum strain YS and sequenced. The deduced primary structures of both xylanases, xylanase U (XylU) and xylanase V (XylV), were homologous with the previously characterized xylanases from C. thermocellum strain F1. Truncated derivatives of XylV were produced and their biochemical properties were characterized. The xylanases were shown to be remarkably thermostable and resistant to proteolytic inactivation. The catalytic domains hydrolysed xylan by a typical endo-mode of action. The type VI cellulose-binding domain (CBD) homologue of XylV bound xylan and, to a smaller extent, Avicel and acid-swollen cellulose. Deletion of the CBD from XylV abolished the capacity of the enzymes to bind polysaccharides. The polysaccharide-binding domain was shown to have a key role in the hydrolysis of insoluble substrates by XylV. The C-terminal domain of XylV, which is absent from XylU, removed acetyl groups from acetylated xylan and acted in synergy with the glycosyl hydrolase catalytic domain of the enzyme to elicit the hydrolysis of acetylated xylan.

Acetylation↗
PubMed1998

[Antioxidant effect of drugs used in cardiovascular therapy].

Oxidative stress is implicated in the pathogenesis of various cardiovascular disorders. The knowledge, characterisation and comparison of the different antioxidant properties of some cardiovascular drugs might lead to new therapeutic approaches. Blood constituents are biological products easier to obtain. Their oxidative damage is accepted to be involved in several pathogenic pathways such as atherogenesis. Blood products can be utilised as in vitro models of macromolecular and cellular oxidative damage. It is well known that transition metals catalyse the generation of more damaging reactive oxygen species. We studied the antioxidant effect of four beta-adrenergic blocking agents (pindolol, propranolol, atenolol and metoprolol) and of one calcium channel antagonist (nifedipine), on the plasma oxidative damage induced by copper. Lipid peroxidation was evaluated by measuring fluorescent substances. We added the drugs to the assay system, before and after the induction of peroxidation by copper, to elucidate their ability to prevent and/or block lipid peroxidation. We observed that pindolol, propranolol and nifedipine have antioxidant properties, in the assay system, when added 15 min before the addition of copper. This effect is demonstrated by the delay in initiation and decrease in formation of lipid peroxidation products. Nifedipine also has a remarkable chain breaking effect. We compared the drugs with ascorbic acid in their relative antioxidant effect: nifedipine > ascorbate > pindolol > propranolol.

Adrenergic beta-Antagonists↗
PubMed1997

Apatite deposition on titanium surfaces--the role of albumin adsorption.

Titanium implant surfaces are known to spontaneously nucleate apatite layers when in contact with simulated body fluids. However, adsorption of proteins may influence the process of apatite layer formation. In this study the role of bovine serum albumin (BSA) adsorption in the process of apatite deposition on titanium substrates is investigated. Deposition of calcium phosphate was induced by immersing titanium substrates in a Hank's balanced salt solution (HBSS) for times ranging from 1 to 23 days. The resulting substrates were studied by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), wettability measurements and electrochemical impedance determinations. All these methods indicate the presence of a calcium phosphate layer. The same procedure was repeated substituting HBSS with a solution of BSA in HBSS. Although SEM, EDS and electrochemical impedance spectra do not reveal the presence of an apatite layer, XPS analysis strongly indicates that the inhibition of apatite formation by BSA is only partial. The competition between BSA adsorption and apatite deposition seems to lead to a mixed film where the protein co-exists with calcium phosphate. Wettability studies suggest that this surface film is heterogeneous and porous, similar to the thicker films formed in albumin-free HBSS.

Adsorption↗
PubMed1997

[Effect of silibinin on oxidative damage of blood constituents].

Silibinin (SDH) is a flavonoid with ascertained hepatoprotective effects, which have been partially attributed to its antioxidant properties. Oxidation of blood constituents could have a role in atherogenesis and interfere with the rheologic properties of the blood. In this study we investigated, whether SDH could protect some blood constituents against oxidative modification. In human plasma we measured TBARS and fluorescence generation as indicators of copper or azobis amidinopropane hydrochloride (AAPH) at 760 mm Hg PO2-induced lipid peroxidation. SDH at 50 microM inhibited copper-induced TBARS formation by 25% and fluorescence by 47%. SDH also inhibited AAPH-induced lipid peroxidation, but at 175 microM concentration only. Oxidative modification of albumine was evaluated by fluorescence generation. SDH at 50 microM inhibited copper/hydrogen peroxide fluorescence generation by 54% and at 2.5 microM it inhibited EDTA-Fe (II)/hydrogen peroxide fluorescence generation by 31%. The protection of albumin by SDH was confirmed by SDS-PAGE electrophoresis. Copper-induced red-cell lipid peroxidation was evaluated by TBARS formation. SDH at 250 microM inhibited copper-induced lipid peroxidation and hemolysis by 45% and 94%, respectively. SDH also inhibited hemolysis in red-cell suspensions exposed to hydrogen peroxide, but not lipid peroxidation. Our results show that SDH may protect blood constituents from oxidative damage.

Blood↗