Search PubMed⌕ Search

Biomedical subjects

A Bigi

Publications and source records attributed to A Bigi.

At least 19 recordsLinked to original sources

Normal and osteopenic bone-derived osteoblast response to a biomimetic gelatin-calcium phosphate bone cement.

We have recently developed a new calcium phosphate bone cement enriched with gelatin (GEL-CP), which exhibits improved mechanical properties with respect to the control cement (C-CP). In a previous study, we demonstrated the good response of osteoblast-like cells to the new biomimetic bone cement. Herein, we extend the investigation to primary culture of osteoblasts derived from healthy and pathological bones. Osteoblasts derived from normal (N-OB) and osteopenic (O-OB) sheep bones were cultured on samples of GEL-CP, and their behavior was compared with that of cells cultured on C-CP as control. Cell morphology, proliferation, and differentiation were evaluated at 3 and 7 days. SEM analysis revealed that both N-OB and O-OB showed a normal morphology when cultured on GEL-CP. Biological tests demonstrated that the gelatin-enriched cement improves osteoblasts' activity and differentiation of O-OB cultures, with respect to the control samples. The data indicate that the new composite cement positively stimulates alkaline phosphatase activity, collagen type I, and osteocalcin production, not only in N-OB, but also in O-OB culture. The improvement due to the presence of gelatin suggests that the biomimetic composite material could be successfully applied as bone substitute also in the presence of osteopenic bone.

Animals↗

Human osteoblast response to pulsed laser deposited calcium phosphate coatings.

Octacalcium phosphate (OCP) and Mn(2+)-doped carbonate hydroxyapatite (Mn-CHA) thin films were deposited on pure, highly polished and chemically etched Ti substrates with pulsed laser deposition. The coatings exhibit different composition, crystallinity and morphology that might affect their osteoconductivity. Human osteoblasts were cultured on the surfaces of OCP and Mn-CHA thin films, and the cell attachment, proliferation and differentiation were evaluated up to 21 days. The cells showed a normal morphology and a very good rate of proliferation and viability in every experimental time. Alkaline phosphatase activity was always higher than the control and Ti groups. From days 7 to 21 collagen type I production was higher in comparison with control and Ti groups. The level of transforming growth factor beta 1 (TGF-beta1) was lower at 3 and 7 days, but reached the highest values during following experimental times (14 and 21 days). Our data demonstrate that both calcium phosphate coatings favour osteoblasts proliferation, activation of their metabolism and differentiation.

Calcium Phosphates↗

Biocompatible Mn2+-doped carbonated hydroxyapatite thin films grown by pulsed laser deposition.

Mn(2+)-doped carbonated hydroxyapatite (Mn-CHA) thin films were obtained by pulsed laser deposition on Ti substrates. The results of the performed complementary diagnostic techniques, X-ray diffraction, infrared spectroscopy, X-ray photoelectron spectroscopy, and energy dispersive X-ray spectroscopy investigations indicate that the films are crystalline with a Ca/P ratio of about 1.64-1.66. The optimum conditions, when nearly stoichiometric crystalline thin films were deposited, were found to be 10 Pa oxygen pressure, 400 degrees C substrate temperature, and postdeposition heat treatment in water vapors at the same substrate temperature. The films were seeded with L929 fibroblast and hFOB1.19 osteoblast cells and subjected to in vitro tests. Both fibroblast and osteoblast cells have a good adherence on the Mn-CHA film and on the Ti or polystyrene references. Proliferation and viability tests showed that osteoblast cells growth on Mn-CHA-coated Ti was enhanced as compared to uncoated pure Ti surfaces. Caspase-1 activity was not affected significantly by the material, showing that Mn-CHA does not induce apoptosis of cultured cells. These results demonstrate that Mn-CHA films on Ti should provoke a faster osteointegration of the coated implants as compared to pure Ti. (c) 2004 Wiley Periodicals, Inc. J Biomed Mater Res 71A: 353-358, 2004.

Animals↗

Biocompatible nanocrystalline octacalcium phosphate thin films obtained by pulsed laser deposition.

We extended for the first time pulsed laser ablation to the deposition of octacalcium phosphate Ca8H2(PO4)6.5H2O (OCP) thin films. The depositions were performed with a pulsed UV laser source (lambda=248 nm, tau> or =20 ns) in a flux of hot water vapors. The targets were sintered from crystalline OCP powder and the laser ablation fluence was set at values of 1.5-2 J/cm2. During depositions the collectors, Si or Ti substrates, were maintained at a constant temperature within the range 20-200 degrees C. The resulting structures were submitted to heat treatment in hot water vapors for up to 6 h. The best results were obtained at a substrate temperature of 150 degrees C during both deposition and post-deposition treatment. High-resolution electron microscopy and XRD at grazing incidence indicated that the coatings obtained were made of nanocrystalline OCP. Cross-section TEM investigations showed that the coatings contained droplets stacked on Ti substrates as well as distributed across the entire thickness of the arborescence-like structure layers. The results of WST-1 assay, cell adherence, DNA replication, and caspase-1 activity confirmed the good biocompatibility of the coatings.

Animals↗

Effect of added gelatin on the properties of calcium phosphate cement.

This study investigates the effect of gelatin on the setting time, compressive strength, phase evolution and microstructure of calcium phosphate cement. The composite cement powder (about 18 wt% gelatin, and 82 wt% alpha-tricalcium phosphate) was prepared from the solid compound obtained by casting a gelatin aqueous solution containing alpha-tricalcium phosphate. 5 wt% of CaHPO(4) x 2H(2)O were added to the powder before mixing with the liquid phase. Two cement formulations were prepared using two different liquid/powder ratios, and their properties compared with those of control samples, prepared without gelatin. The final setting time increases from 10 min to more than 45 min when the L/P ratio increases from 0.3 to 0.4 ml/g. The presence of gelatin accelerates the setting reaction, and improves the mechanical properties of the cements. The compressive strength increases with the setting reaction up to 10.7-14.0 MPa for the gelatin cements, whereas the control samples exhibit much lower values. The improved mechanical properties of the composite cements with respect to the controls can be related to their reduced total porosity and more compact microstructure.

Biocompatible Materials↗

Relationship between triple-helix content and mechanical properties of gelatin films.

This paper reports a study on the influence of the renaturation level of gelatin on the mechanical and swelling properties of gelatin films. Films at different renaturation level were obtained from gelatin samples with different Bloom index. It was verified that the triple-helix content, calculated from the values of the enthalpy of denaturation associated to the endothermal transition at about 41 degrees C of gelatin, increases with the Bloom index. The d.s.c. data are further supported by the results of the X-ray diffraction investigation carried out on the same samples. The increase of triple-helix content provokes a significant reduction in the degree of swelling, and a remarkable improvement of the mechanical properties of the films. The elastic Young's modulus, E, increases linearly with the renaturation level, from 3.6 to 12.0 MPa. Crosslinking with GTA 1% remarkably reduces the degree of swelling of all the samples, and induces a further increase of the Young's modulus, which reaches values up to 27 MPa.

Animals↗

In vitro mineralization of gelatin-polyacrylic acid complex matrices.

Gelatin-polyacrylic acid (gel-PAA) matrices were obtained by slow diffusion of polyacrylic acid into gelatin gels. The matrices were submitted to uniaxial stretching, which induces a preferential orientation of the collagen molecules, and used as biomimetic substrates for the nucleation of hydroxyapatite from simulated body fluid (SBF). The relative amount of hydroxyapatite deposited from 1.5SBF increases as a function of polyelectrolyte content in the matrices, up to about 30 wt%. In the absence of PAA, the inorganic phase is laid down on the surface of the gelatin matrices as hemispherical aggregates. At variance, hydroxyapatite deposition in the gel-PAA composite matrices at relatively low PAA content occurs preferentially in the spaces between the layers on the surface of the matrices and displays a tablet-like morphology. At high polyelectrolyte concentration, an almost uniform layer of hydroxyapatite covers the whole surface of the matrices. The preferential orientation of the (002) hydroxyapatite reflection indicates a close relationship between the inorganic crystals and the collagen molecules.

Acrylic Resins↗

A biomimetic gelatin-calcium phosphate bone cement.

The interest in new bone substitutes is rapidly increasing in the field of orthopedic surgery. A variety of calcium phosphate bone cement has been developed and different additives have been used to improve their biocompatibility and bioactivity. Following a biomimetic strategy aimed at reproducing bone characteristics, this study investigates the biological properties of a new gelatin enriched calcium phosphate cement (GEL-CP) that exhibits improved mechanical properties with respect to cement prepared without gelatin (C-CP). Human osteoblast MG63 were cultured on the surfaces of GEL-CP and were compared to cells cultured on C-CP samples, and on polystyrene of plate culture as control (C). Cell attachment, proliferation and differentiation were evaluated up to 21 days. SEM revealed that osteoblasts grown on GEL-CP showed a normal morphology and biological tests demonstrated very good rate of proliferation and viability in every experimental time. The presence of gelatin stimulated alkaline phosphatase activity, collagen and transforming growth factor 31 production. The data indicate that the new cement GEL-CP favors osteoblast proliferation, activation of their metabolism and differentiation. The remarkable improvement of the setting properties of the calcium phosphate cement due to the presence of gelatin suggest that the biomimetic composite material could be successfully applied as bone substitute.

Alkaline Phosphatase↗

Nanocrystalline hydroxyapatite-polyaspartate composites.

The direct synthesis of hydroxyapatite-poly-L-aspartic acid (HA-PASP) nanocrystals has been carried out in presence of increasing amounts of PASP in solution up to 56 mmol/l. WAXS, TEM, TGA, IR and chemical analyses were used to characterize the structure, morphology and composition of the products. PASP is quantitatively incorporated into HA crystals, provoking a reduction of the coherent length of the crystalline domains. Furthermore, composite crystals display a greater length/width ratio with respect to the control HA crystals, and show a remarkable trend towards aggregation. The broadening of the X-ray diffraction reflections indicate a reduction of the coherent length along the long dimension 002 and the cross section 310 of the apatite crystals. The comparison between the morphological and structural data allows to suggest a specific interaction between PASP and HA structure.

Biocompatible Materials↗

Interaction of acidic poly-amino acids with octacalcium phosphate.

Octacalcium phosphate (OCP) hydrolysis into hydroxyapatite (HA) has been investigated in aqueous solutions at different concentrations of poly-L-aspartate (PASP) and poly-L-glutamate (PGLU). In the absence of the polyelectrolytes, the transformation of OCP into HA is complete in 48 h. Both poly-L-aspartate and poly-L-glutamate inhibit OCP hydrolysis. However, PGLU displays a greater inhibiting effect, as a result of the different extent of phase transformation obtained at the same polyelectrolyte concentration. The inhibition takes place through polyelectrolyte adsorption on the (100) face of OCP crystals, which prevents the splitting of OCP crystals along their c-axis and the transformation into the final very long, needle-like, apatitic crystals.

Amino Acids, Acidic↗

Porous phosphate-gelatine composite as bone graft with drug delivery function.

The design and synthesis of porous phosphate-gelatine composite implant which mimicks the structure of natural bone and has drug delivery function is proposed. Gelatine reproducing the proteinaceous part of bone was cross-linked in order to modulate its solubility in the physiologic fluids. The kinetic of gelatine release from ceramic matrix was also evaluated as model of the release of any therapeutic compound which can be loaded into gelatine.

Journal Article↗

Bonelike apatite growth on hydroxyapatite-gelatin sponges from simulated body fluid.

In vitro bioactivity of gelatin sponges and hydroxyapatite-enriched gelatin sponges was tested through evaluation of the variations in their composition and morphology after soaking in simulated body fluid (1.5) for periods up to 21 days at 37 degrees C. The presence of hydroxyapatite inside the sponges promotes the deposition of bonelike apatite crystals. The deposits are laid down as spherical aggregates, with mean diameters increasing from about 1-2 microm, after 4 days of soaking in simulated body fluid solution, up to about 3.5 microm in the samples soaked for 21 days. Simultaneously, the relative amount of inorganic phase increases up to about 56% wt, leading to a composite material with a composition quite close to that of bone tissue. The inorganic phase is a poor crystalline carbonated apatite similar to trabecular bone apatite.

Apatites↗

Alpha-tricalcium phosphate hydrolysis to octacalcium phosphate: effect of sodium polyacrylate.

Alpha-Tricalcium phosphate (alpha-TCP) hydrolysis into octacalcium phosphate (OCP) has been investigated in phosphoric acid solution at different concentrations of sodium polyacrylate (NaPA). The hydrolysis process has been followed by powder X-ray diffraction, infrared absorption and scanning electron microscopy analyses. In the absence of the polyelectrolyte, alpha-TCP undergoes a complete transformation into OCP in 24 h. The presence of polyacrylate in solution inhibits the hydrolysis so that a NaPA concentration of 0.5 microm is sufficient to lengthen the time required to complete the hydrolysis to 4 days. The variation of Ca2+ concentration in the soaking solution suggests that the transformation occurs through alpha-TCP dissolution followed by OCP precipitation. The delayed OCP nucleation and growth in the presence of polyacrylate implies a preferential adsorption of the polyelectrolyte on the growing OCP crystals, which induces an anisotropic reduction of the coherence lengths of the perfect crystalline domains.

Acrylic Resins↗

Stabilization of gelatin films by crosslinking with genipin.

The possibility to stabilize gelatin films by crosslinking with genipin was investigated through a mechanical, chemical and thermal characterization of samples treated with genipin solutions at different concentrations. The extent of crosslinking, evaluated as difference between the number of free epsilon -amino groups before and after crosslinking, increases as a function of genipin concentration up to about 85%. Simultaneously, the deformability of the films decreases whereas the Young's modulus E, increases. Furthermore, crosslinking provokes a significant reduction of the swelling in physiological solution, and enhances the thermal stability of the samples, as indicated by the results of the d.s.c. investigation. The data obtained from the films treated with genipin at concentrations higher than 0.67% are quite similar, and indicative of a good stabilizing effect of genipin. In spite of the small gelatin release (2%) observed after 1 month of storage in buffer solution, the mechanical, thermal and swelling properties of the films are very close to those previously obtained for glutaraldehyde crosslinked gelatin, and suggest that genipin, which is by far less cytotoxic, can be considered a valid alternative for crosslinking gelatin biomaterials.

Biocompatible Materials↗

Twisted plywood pattern of collagen fibrils in teleost scales: an X-ray diffraction investigation.

The distribution and orientation of collagen fibrils, and apatite crystals, in the scales of a bony fish (Leuciscus cephalus) were investigated by X-ray diffraction. The small-angle diffraction patterns obtained with a microfocus scanning setup from most of the examined areas exhibit a distribution of intensity of the collagen reflections according to five preferential orientations, at 36 degrees from one another. It is suggested that the peculiar small-angle X-ray diffraction pattern is due to a plywood arrangement of collagen fibrils in successive layers parallel to the surface of the scale. The fibrils are strictly aligned in each layer and the alignment rotates by 36 degrees in successive layers, according to a discontinuous twist that generates a symmetric plywood pattern. The large spread of the wide-angle reflections does not allow one to distinguish the five directions of orientation in the intensity distribution of the 002 reflection of apatite. However, the patterns recorded from the less ordered regions of the scales display two different orientations of the 002 reflection and allow one to infer a preferential distribution of the apatite crystals with their c-axes parallel to the collagen fibrils. Although much electron microscopic evidence of plywood arrangements in calcified, as well as uncalcified, tissues has been reported, these are the very first diffraction data which unambiguously confirm the presence of these peculiar structures and suggest that this kind of investigation represents a powerful tool with which to study plywood arrangements in biological tissues.

Animals↗

Mechanical and thermal properties of gelatin films at different degrees of glutaraldehyde crosslinking.

The mechanical, thermal, swelling and release properties of glutaraldehyde (GTA) crosslinked gelatin films have been investigated in order to verify the influence of GTA concentration on the stability of the films. Air-dried films were submitted to treatment with GTA solutions at concentrations ranging from 0.05 to 2.5 wt%. At the smallest GTA concentration, the crosslinking degree, determined by trinitrobenzensulfonic acid assay, amounts to about 60% and increases up to values near 100%, obtained with GTA concentrations > or = 1 wt%. Simultaneously, the deformability of the films decreases, whereas the stress at break, sigmab, and the Young's modulus, E, increase. A crosslinking degree of about 85%, obtained using 0.25% GTA, is enough to prevent gelatin release in buffer solution and to provoke a significant reduction of the swelling in physiological solution. Furthermore, crosslinking greatly affects the thermal stability of the samples, as indicated by the results of differential scanning calorimetry (d.s.c.) investigation carried out on wet and air-dried films. The data suggest that the use of GTA at low concentration, which is desiderable to prevent toxicity, allows to modulate the physico-chemical properties of gelatin films, in order to obtain stable materials with a wide range of possible biomedical applications.

Biocompatible Materials↗

Effect of sodium polyacrylate on the hydrolysis of octacalcium phosphate.

Octacalcium phosphate (OCP) hydrolysis into hydroxyapatite (HA) has been investigated in aqueous solutions at different concentrations of sodium polyacrylate (NaPA). In the absence of the polyelectrolyte, OCP undergoes a complete transformation into HA in 48 h. The hydrolysis is inhibited by the polymer, which is significantly adsorbed on the crystals, up to about 22 wt.%. A polymer concentration of 10(-2) mM is sufficient to cause a partial inhibition of OCP to HA transformation, which is completely hindered at higher concentrations. The small platelet-like crystals in the TEM images of partially converted OCP can display electron diffraction patterns characteristic either of OCP single crystals or of polycrystalline HA, whereas the much bigger plate-like crystals exhibit diffraction patterns characteristic of OCP single crystals. The polyelectrolyte adsorption on OCP crystals is accompanied by an increase of their mean length and by a significant reduction of the coherence length of the perfect crystalline domains along the c-axis direction. It is suggested that the carboxylate-rich polyelectrolyte is adsorbed on the hydrated layer of the OCP (100) face, thus inhibiting its in situ hydrolysis into HA.

Acrylic Resins↗

Biomimetic growth of hydroxyapatite on gelatin films doped with sodium polyacrylate.

Gelatin films were used as biomimetic substrates for the nucleation of hydroxyapatite from simulated body fluid (SBF). Stretching and presence of sodium polyacrylate appear to be essential factors for the specific nucleation and growth of hydroxyapatite crystals inside the films. After soaking in 1.5SBF for periods longer than 4 days, all the films display a completely calcified surface. However, the spherical aggregates on the film surfaces do not give any X-ray diffraction effect and exhibit a low Ca/P molar ratio, typical of amorphous calcium phosphate. The ordered deposition of crystalline hydroxyapatite has been verified to take place only in stretched polyacrylate--gelatin films. The crystals grow as tablets about 2 microns thick among the gelatin layers, with their crystallographic c-axes preferentially oriented parallel to the direction of orientation of the collagen molecules, thus resembling the parallel orientation of apatitic crystals and collagen fibrils in calcified biological tissues.

Acrylic Resins↗