Biomedical subjects

A A Poot

Publications and source records attributed to A A Poot.

31 records · Page 2Linked to original sources

PubMed2000

Improved endothelialization of vascular grafts by local release of growth factor from heparinized collagen matrices.

Endothelial cell seeding, a promising method to improve the performance of small-diameter vascular grafts, requires a suitable substrate, e.g. crosslinked collagen. In addition, the growth of seeded endothelial cells can be improved by local release of a heparin-binding protein, basic fibroblast growth factor (bFGF). In this study, the influence of immobilization of heparin to collagen, crosslinked using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) in combination with N-hydroxysuccinimide (NHS), on the binding and release of bFGF was determined. Heparin was immobilized also using EDC and NHS. Furthermore, the effects of the release of bFGF from (heparinized) EDC/NHS-crosslinked collagen on the proliferation of seeded endothelial cells was studied in vitro. Immobilization of increasing amounts of heparin to EDC/NHS-crosslinked collagen (containing 14 free epsilon-amino groups per 1000 amino acid residues, E/N14C) resulted in binding of increasing amounts of bFGF to the material. Maximal bFGF binding was observed for E/N14C containing 20-30 mg heparin immobilized per gram of collagen which was obtained using a molar ratio of EDC to heparin-carboxylic acid groups of 0.4 for heparin immobilization (E/N14C-H(0.4)). Up to concentrations of 320 ng bFGF/ml, 10% of the added bFGF bound to E/N14C, while binding of bFGF to E/N14C-H(0.4) was 22%. The initial release rate of bFGF bound to E/N14C was much higher compared to bFGF bound to E/N14C-H(0.4): respectively, 30 vs. 2% in the first 6 h. After 10 days, the bFGF release from E/N14C and E/N14C-H(0.4) amounted to 83 vs. 42%, respectively. Binding of increasing amounts of bFGF resulted in increased growth of human umbilical vein endothelial cells (HUVECs) seeded on both E/N14C and E/N14C-H(0.4). Nevertheless, after 6 and 10 days of proliferation cell numbers on E/N14C-H(0.4) where higher than cell numbers on E/N14C, irrespective of the bFGF concentration used for loading of the matrix. It is concluded that heparinized, EDC/NHS-crosslinked collagen is a good synthetic vascular graft coating for in vivo endothelial cell seeding.

Administration, Topical↗

PubMed2000

Endothelial cell seeding on crosslinked collagen: effects of crosslinking on endothelial cell proliferation and functional parameters.

Endothelial cell seeding, a promising method to improve the performance of small-diameter vascular grafts, requires a suitable substrate, such as crosslinked collagen. Commonly used crosslinking agents such as glutaraldehyde and formaldehyde cause, however, cytotoxic reactions and thereby hamper endothelialization of currently available collagen-coated vascular graft materials. The aim of this study was to investigate the effects of an alternative method for crosslinking of collagen, using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) in combination with N-hydroxysuccinimide (NHS), on various cellular functions of human umbilical vein endothelial cells (HUVECs) in vitro. Compared to non-crosslinked type I collagen, proliferation of seeded endothelial cells was significantly increased on EDC/NHS-crosslinked collagen. Furthermore, higher cell numbers were found with increasing crosslink densities. Neither the morphology of the cells nor the secretion of prostacyclin (PGI2), von Willebrand factor (vWF), tissue plasminogen activator (t-PA) and plasminogen activator inhibitor (PAI-1) was affected by the crosslink density of the collagen substrate. Therefore, EDC/NHS-crosslinked collagen is candidate substrate for in vivo application such as endothelial cell seeding of collagen-coated vascular grafts.

Blood Coagulation Factors↗

PubMed1999

Blood compatibility of surfaces with immobilized albumin-heparin conjugate and effect of endothelial cell seeding on platelet adhesion.

Endothelial cell (EC) seeding significantly improves the blood compatibility of artificial surfaces. Although a coating consisting of albumin and heparin (alb-hep) is a suitable substrate for seeded ECs, binding of ECs to the substrate further improves when small amounts of fibronectin are present in the alb-hep coating. Alb-hep conjugate was immobilized on carbon dioxide gas plasma-treated polystyrene (PS-CO(2)), thereby significantly increasing the recalcification time of blood plasma exposed to this surface. Furthermore, surface-immobilized alb-hep conjugate inhibited exogenous thrombin. Heparin activity was reduced by adding fibronectin on top of a monolayer of alb-hep conjugate, but not by simultaneous coating of fibronectin and alb-hep conjugate. Coating of PS-CO(2) with alb-hep conjugate significantly decreased contact activation (FXII activation). The number of platelets deposited from blood plasma on PS-CO(2) coated with alb-hep conjugate was twice as high as on PS-CO(2) coated with albumin. Addition of fibronectin to alb-hep conjugate-coated PS-CO(2) had no significant effect on the number of adhered platelets. Seeding of the substrates with ECs significantly reduced the number of adhered platelets under stationary conditions. Platelets deposited onto endothelialized surfaces were primarily found on endothelial cell edges, and sparingly on areas between ECs. In conclusion, alb-hep conjugate-coated surfaces display anticoagulant activity. ECs adhering to and proliferating on this coating significantly decrease the number of platelets which adhere to the surface. Therefore, alb-hep conjugate-coated surfaces form a suitable substrate for seeding of ECs in low density. Although application of fibronectin on top of the coating decreases the anticoagulant activity to some extent, it might be useful in view of the improved adherence of ECs to the coating.

Animals↗

PubMed1999

Proliferation of endothelial cells on surface-immobilized albumin-heparin conjugate loaded with basic fibroblast growth factor.

Seeding of endothelial cells (ECs) on the luminal surface of small-diameter vascular grafts is a promising method to avoid occlusion of these prostheses. Immobilization of basic fibroblast growth factor (bFGF) to substrates used to coat or fill porous prostheses may enhance the formation of a confluent monolayer of ECs. Human umbilical vein endothelial cells (HUVECs) were grown on bFGF-loaded albumin-heparin conjugate bound to CO2 gas-plasma-treated polystyrene. In the order of 2-3 ng/cm2 bFGF had to be immobilized to form a confluent monolayer of HUVECs. The most prominent effect of surface-immobilized bFGF was stimulation of the proliferation shortly after seeding, resulting within 3 days in confluent cell monolayers with high density. In contrast, in cultures with 0.3 ng/mL bFGF in the medium instead of bFGF bound to the surface, it took almost a week before the cell layers reached confluency. Binding of bFGF to heparin and the biological activity of bFGF towards ECs were not influenced by the (radio-)labeling of bFGF with iodine. However, only a minor part of the bFGF used in this study displayed heparin affinity. Furthermore, degradation and multimerization of labeled bFGF in time occurred when the growth factor was stored at 20 degrees -37 degrees C. This limits the use of labeled bFGF to short-term (hours) experiments. In conclusion, bFGF loading of vascular graft surfaces through complexation of bFGF with a heparin-containing matrix probably will lead to more rapid formation of a confluent monolayer of ECs on graft surfaces upon seeding of the cells.

Blood Vessel Prosthesis↗

PubMed1999

Endothelialization of crosslinked albumin-heparin gels.

Crosslinked gels of albumin as well as heparinized albumin gels, potential sealants of prosthetic vascular grafts, were studied with regard to in vitro stability, binding of basic fibroblast growth factor (bFGF) and cellular interactions. A small percentage of the heparin present in these gels, was released during storage in SDS solution. During storage in cell culture medium at 37 degrees C, heparin release was 21-25 percent. Release of albumin did not occur. Human umbilical vein endothelial cells (HUVECs) rapidly adhered and subsequently spread on (heparinized) albumin gels, but proliferation was only observed if heparin was present in the gel. Binding of 125I-bFGF to heparinized albumin gel was 35 percent higher than to non-heparinized albumin gel. Growth of HUVECs occurred only on heparinized albumin gel loaded with bFGF and not on bFGF-loaded albumin gel. The number of platelets deposited under stationary conditions onto heparinized albumin gel was about twice the number found on nonheparinized albumin gel. Seeding of HUVECs on heparinized albumin gel, significantly reduced the number of platelets adhering to this surface. Moreover, no spreading of platelets was observed on substrates seeded with HUVECs. It can be concluded that crosslinked gels of albumin to which heparin is immobilized, are candidate sealants for prosthetic vascular grafts and suitable substrates for endothelial cell seeding.

Albumins↗

PubMed1998

Different growth behaviour of human umbilical vein endothelial cells and an endothelial cell line seeded on various polymer surfaces.

Major obstacles for successful application of endothelial cell seeding in synthetic vascular grafts include the source of autologous endothelial cells, the efficiency of cell seeding and detachment of adherent endothelial cells from the graft surface after restoration of circulation. Human umbilical vein endothelial cells (HUVECs) are frequently used to investigate the in vitro adhesion and proliferation of endothelial cells on polymer surfaces. In order to minimize the biological variation of HUVECs isolated from different umbilical veins, it would be advantageous to use an endothelial cell line in in vitro proliferation experiments. Aim of the present study was to compare the proliferation of primary HUVECs and the endothelial cell line EC-RF24 on several polymer surfaces coated with various concentrations of the adhesive protein fibronectin. EC-RF24 cells grow to a higher density than primary HUVECs. Moreover, the EC-RF24 cell line is able to proliferate on surfaces with sub-optimal adhesive properties. Therefore, it is concluded that the EC-RF24 cell line is less suitable for evaluation of the in vitro proliferation of endothelial cells on polymer surfaces.

Biocompatible Materials↗

PubMed1998

Small-diameter vascular graft prostheses: current status.

In contrast to large-diameter vascular grafts (i.e. larger than 5 mm) which remain excellent for more than 10 years after implantation, small-diameter vascular grafts of both Dacron and Teflon occlude rapidly upon implantation. In this overview article, the strategies used to improve the patency of these small-diameter grafts, the current status in clinical trials, and further perspectives in the field of artificial vascular graft development are reviewed. It is concluded that, in view of recent developments in tissue engineering approaches, the future of small-diameter vascular prostheses looks promising.

Animals↗

PubMed1998

Adherence and proliferation of endothelial cells on surface-immobilized albumin-heparin conjugate.

Small-diameter vascular grafts rapidly fail after implantation, due to occlusion caused by thrombosis. This problem cannot be overcome using medication. A promising improvement of graft patency is the seeding of endothelial cells (EC) on the luminal surface of the vascular graft. Conjugates of albumin and heparin, which were developed to obtain nonthrombogenic coatings, could form an ideal coating for vascular grafts. Besides presenting anticoagulant function, heparin will bind proteins with cell adhesive properties, thus facilitating adherence of EC to the graft surface. EC were able to grow to confluency on CO(2) gas plasma-treated polystyrene (PS-CO(2)) coated with albumin-heparin conjugate. CO(2) gas plasma treatment resulted in the introduction of functional groups at the surface (e.g., hydroxyl, aldehyde, carboxylic acid, and epoxide groups). Addition of albumin-heparin conjugate to the functionalized surface in an aqueous solution with pH 8.2 yielded a stable monolayer of covalently bound conjugate. The number of cells adhering and proliferating on this surface was comparable to the number of cells on fibronectin-coated PS-CO(2). However, the structure and size of EC proliferating on surface-immobilized albumin-heparin was more irregular. Long-term adherence might be improved by adding fibronectin to the albumin-heparin surface, either as a mixture with albumin-heparin or in a separate incubation step.

Albumins↗

PubMed1996

Proteins involved in the Vroman effect during exposure of human blood plasma to glass and polyethylene.

The amounts of fibrinogen adsorbed to glass from various human blood plasmas have been measured as a function of time. The plasmas were 11 single donor plasmas, pooled plasma, a single donor high molecular weight kininogen (HMWK)-deficient plasma and HMWK-deficient plasma, which had been reconstituted with HMWK. For adsorption times between 1 min and 1 h more fibrinogen adsorbed from HMWK-deficient plasma compared with the amounts of fibrinogen which adsorbed from the other plasmas. This result supports the conclusion of several authors that HMWK is involved in the displacement of fibrinogen, initially adsorbed from normal human plasma to glass. Glass surfaces, pre-exposed to solutions of plasma and subsequently exposed to 1:1 diluted plasma, gives rise to a relatively high adsorption of HMWK which is independent of the plasma concentration of the precoating solution. The results indicate that HMWK from 1:1 diluted plasma is involved in the displacement of proteins from glass surfaces which had been pre-exposed to solutions with a low plasma concentration. Experiments with polyethylene as a substrate reveal that high density lipoprotein (HDL) from 1:1 diluted plasma is involved in the displacement of proteins from polyethylene surfaces which had been pre-exposed to solutions with a low plasma concentration. Moreover, evidence is presented that substantial amounts of albumin and fibrinogen, adsorbed from 1:1000 diluted plasma to glass and polyethylene, are displaced from the surfaces of these materials by proteins from 1:1 diluted plasma different from HMWK and HDL.

Adsorption↗

PubMed1995

The binding of human blood platelets to fibrinogen-, fibronectin-, and Arg-Gly-Asp-derivatized Sephadex G-10.

The adhesive proteins fibrinogen (FG) and fibronectin (FN) were immobilized to glycine-Sephadex G-10. The derivatized Sephadex G-10 gels were used to bind human blood platelets. For comparison, Gly-Arg-Gly-Asp-Ser-Pro(GRGDSP)-derivatized Gly-Sephadex G-10 was used. FG-, FN-, and GRGDSP-Gly-Sephadex G-10 each bound a substantial number of activated blood platelets (> or = 5 x 10(8) ml-1 gel) while non-activated platelets were not bound. Binding of ADP-treated blood platelets to the affinity adsorbents was dependent on the ADP-concentration which was used, reaching a near-maximal value at about 10 microM ADP. Platelet binding to the three types of affinity gels could be completely inhibited by dissolved GRGDSP as well as monoclonal anti-platelet glycoprotein IIb/IIIa (GPIIb/IIIa) antibody CLB-C17, which demonstrates that platelet binding specifically involves the fibrinogen binding site on GPIIb/IIIa. Platelet binding to all three affinity gels required free Ca2+ and Mg2+ ions: platelets binding in the absence of these divalent cations was considerably lower than platelet binding in buffer containing 2 mM Ca2+ and 1 mM Mg2+. Moreover, activated ethylenediamine-tetraacetate (EDTA)-treated platelets did not bind at all to the affinity gels. The finding that non-activated platelets did not bind to the affinity gels is thought to be related to both the high hydrophilicity of the Sephadex basic material and to the native state of the gel-bound fibrinogen and fibronectin.

Binding Sites↗

PubMed1994

Preparation of cell-affinity adsorbents by immobilization of peptides to Sephadex G-10.

In this study, affinity adsorbents for the binding of activated blood platelets and endothelial cells were prepared from Sephadex G-10 by immobilization of peptides, derived from the cell-adhesive amino acid sequence RGD (arginine-glycine-aspartic acid). Derivatization of Sephadex G-10 was accomplished by sequential coupling of specific dipeptides (RG and DV) (V = valine) and by coupling of the RGD-containing hexapeptide GRGDSP (S = serine, P = proline). Two types of gel were prepared by sequential coupling, designated as G10 (acetone) and G10 (dimethylformamide) (G10(DMF)), containing peptides which had been coupled to the outer side of the beads and throughout the porous beads, respectively. The binding capacity of the prepared Sephadex-derivatives amounted up to 2 x 10(9) human blood platelets per millilitre GRGDV-Sephadex at immobilized peptide concentrations, that were in the nanomole range (per millilitre packed gel) and which differed a factor 10 between G10 (acetone) and G10 (DMF). In a second series of experiments, different amounts of the hexapeptide GRGDSP were coupled to carboxylated Sephadex G-10 and carboxylated Sepharose CL 6B. The binding of human umbilical vein endothelial cells to the resulting materials was studied. Up to 10(6) endothelial cells attached per ml GRGDSP-derivatized hydrogel at peptide concentrations of 15 nmol GRGDSP/ml Sephadex and at +/- 300 nmol GRGDSP/ml Sepharose. Substitution of the arginine residue of the RGD-sequence by glutamine abolished the cell-binding activity of the immobilized peptide towards activated blood platelets but not towards endothelial cells. From the results of this study it can be concluded that small peptides can be coupled to the outer side of the porous Sephadex beads, resulting in high effective ligand densities for cell-affinity applications. In this respect, Sephadex G-10, derivatized according to 'the acetone method' is a good alternative for polystyrene and other solid phase materials.

Amino Acid Sequence↗

PubMed1991

Improved adhesion and proliferation of human endothelial cells on polyethylene precoated with monoclonal antibodies directed against cell membrane antigens and extracellular matrix proteins.

Endothelial cell seeding may improve the patency of synthetic vascular grafts provided that platelet reactivity of nonendothelialized sites is not increased. We have investigated if surface-adsorbed monoclonal antibodies directed against endothelial cell membrane proteins and against extracellular matrix proteins promote the adhesion and proliferation of cultured human endothelial cells, without causing platelet deposition at non-endothelialized sites. Adhesion of endothelial cells onto polyethylene coated with monoclonal antibodies directed against endothelial cell-specific membrane antigens, integrin receptors and glycoprotein CD31 was equal to or higher than adhesion onto fibronectin-coated polyethylene. Endothelial cells did not proliferate on these surface-adsorbed antibodies. However, pre-coating of polyethylene with mixtures of endothelial cell-specific monoclonal antibodies and monoclonal antibodies directed against fibronectin or von Willebrand factor, resulted in relatively high adhesion and optimal proliferation. Platelet reactivity of the polyethylene surface was found to significantly increase after adsorption of fibronectin, endothelial cell-specific monoclonal antibody or its Fc fragments. In contrast, adsorption of F(ab')2 fragments of endothelial cell-specific monoclonal antibody did not promote platelet deposition. Therefore, it is concluded that coating of vascular graft materials with mixtures of F(ab')2 fragments of monoclonal antibodies specifically directed against endothelial cells and against extracellular matrix proteins may be an effective way to both promote the growth of seeded endothelial cells and limit platelet-graft interaction.

Adsorption↗

PubMedDate not supplied

Analysis of the balance between proliferation and apoptosis of cultured vascular smooth muscle cells for tissue-engineering applications.

Tissue homeostasis, the balance between cell proliferation and apoptosis, is an important factor in tissue engineering. We describe a new method to analyze markers of both proliferation and apoptosis in a single assay to monitor growth behavior of cell cultures. Human vascular smooth muscle cells (VSMCs) were cultured either on gelatin-coated tissue culture polystyrene or in three-dimensional porous scaffolds composed of insoluble collagen and elastin. mRNA concentrations of cyclin E, as a marker of proliferation, and of tissue transglutaminase (tTG) as a marker of apoptosis, quantified by a real-time reverse transcriptase-polymerase chain reaction (RT-PCR) and normalized to porphobilinogen deaminase mRNA concentrations, were analyzed. tTG mRNA expression levels were increased when apoptosis was induced by tumor necrosis factor-alpha in combination with cycloheximide or by culturing the cells in serum-free culture medium. Cyclin E mRNA expression levels were less altered in these cell cultures. Results were compared with several reference tests to measure apoptosis including DNA fragmentation, annexin V staining, and light microscopy. This RT-PCR method could be used to characterize cell growth behavior of VSMCs in vitro. In addition, it was shown that this test is suitable to measure the balance between proliferation and apoptosis of VSMCs present in tissue-engineered constructs.

Annexin A5↗